Çeşitli Lazer Güçleri İndirekt Kompozit Rezinin Kompozit Rezin ile Tamir Bağlantı Gücünü Etkiler mi?

Year 2019, Volume: 5 Issue: 1, 137 - 142, 01.01.2019

Kubilay Barutcigil Ömer Kırmalı

Abstract

Amaç: Bu çalışmanın amacı literatürde de araştırılmamış, farklı güçlerde uygulanan Er; Cr: YSGG lazerin indirekt kompozit ile kompozit rezin KR arasındaki Tamir Bağlanma Dayınımına RBS etkisini karşılaştırmaktır.Gereç ve Yöntemler: 70 adet silindirik indirekt kompozit rezin örnek hazırlandı ve rastgele 7 gruba ayrıldı n= 10 . Yüzey işlemi uygulanmamış grup kontrol grubu , Er; Cr: YSGG lazer uygulanmış gruplar 1 ile 6 W . Yüzey işlemini takiben yüzeylerine silan uygulandı. Direk kompozit silindirik plastik kalıp kullanılarak indirekt kompozit yüzeyine uygulandı ve polimerize edildi. Tamir bağlantı gücü 1 mm/dak kafa hızında geleneksel test cihazında ölçüldü ve her gruptan bir örnek taramalı elektron mikroskobunda SEM incelendi. Veriler tek yönlü ANOVA ve Tukey post-hoc testleri ile p=0,05 anlamlılık düzeyinde analiz edildi.Bulgular: Bütün yüzey işlemleri uygulanan gruplarda tamir bağlantı değerleri yüzey işlemi uygulanmayan kontrol gruba göre artış göstermesine rağmen, gruplar arasında istatistiksel olarak anlamlı farklılıklar olmadığı bulundu p>0,05 . Kırılma yüzeyleri daha çok adeziv kırılma tipi olduğu görüldü.Sonuç: Lazer uygulamasının indirekt kompozit rezinin yüzeylerini pürüzlendirmek için etkili bir yöntem olduğu görülmüştür. Bununla birlikte indirek kompozit ile direkt kompozit arasındaki yüksek tamir bağlantı gücü tek başına yüzey pürüzlülüğüyle ilişkilendirilemez

Keywords

İndirekt kompozit, Tamir bağlantı gücü, Er, Cr:YSGG lazer

Do Various Laser Powers Affect the Repair Bond Strength of Composite Resin to Indirect Composite?

Abstract

Objective: The purpose of the present study was to compare the effect of Er;Cr:YSGG laser irradiation at different powers on repair bond strength RBS between indirect composite resin and composite resin CR , which has not been done before in literature. Material and Methods: Seventy cylindrical samples of an indirect composite resin were prepared and randomly divided into seven groups n=10 : untreated surface control group and irradiations with Er,Cr:YSGG lasers 1 to 6 W , followed by application of a silane. CR was then placed on the composite blocks using a cylindrical plastic mold and cured. The RBS tests were carried out using a universal testing machine at a cross-head speed of 1 mm/min, and one sample of each group was also observed under a scanning electronic microscope SEM . Data was analyzed with one-way ANOVA and Tukey post-hoc tests at a significance level of p = 0.05. Results: All surface treatments resulted in increased RBS compared to the untreated surface, but there were no statistical differences among the groups p>0.05 . Fractured surfaces showed mostly adhesive failures. Conclusions: Laser irradiation is an effective method for roughening surfaces of indirect composite resin. However, the high RBS observed in the indirect composite/CR interface cannot be explained by roughness alone

Keywords

Indirect composite, Repair bond strength, Er, Cr:YSGG laser

References

• 1. Zorba YO, Ilday NO, Bayindir YZ, Demirbuga S. Comparing the shear bond strength of direct and indirect composite inlays in relation to different surface conditioning and curing techniques. Eur J Dent 2013; 7:436-41.
• 2. D’Arcangelo C, Vanini L. Effect of three surface treatments on the adhesive properties of indirect composite restorations. J Adhes Dent 2007; 9:319-26.
• 3. Frankenberger R, Kramer N, Petschelt A. Long-term effect of dentin primers on enamel bond strength and marginal adaptation. Oper Dent 2000; 25:11-9.
• 4. Mjor IA. The reasons for replacement and the age of failed restorations in general dental practice. Acta Odontol Scand 1997; 55:58-63.
• 5. Opdam NJ, Feilzer AJ, Roeters JJ, Smale I. Class I occlusal composite resin restorations: in vivo post-operative sensitivity, wall adaptation, and microleakage. Am J Dent 1998; 11:229-34.
• 6. Sarrett DC. Clinical challenges and the relevance of materials testing for posterior composite restorations. Dent Mater 2005; 21:9-20.
• 7. Erdemir A, Eldeniz AÜ, Belli S. Kompozit rezinlerin tamirinde farklı bonding sistemlerin kullanılması. Cumhuriyet Universitesi Dis Hekimligi Fakultesi Dergisi 2004; 7:7-10.
• 8. Kimyai S, Oskoee SS, Mohammadi N, Rikhtegaran S, Bahari M, Oskoee PA, et al. Effect of different mechanical and chemical surface treatments on the repaired bond strength of an indirect composite resin. Lasers Med Sci 2015; 30:653-9.
• 9. Keski-Nikkola MS, Alander PM, Lassila LV, Vallittu PK. Bond strength of Gradia veneering composite to fibrereinforced composite. J Oral Rehabil 2004; 31:1178-83.
• 10. Hori S, Minami H, Minesaki Y, Matsumura H, Tanaka T. Effect of hydrofluoric acid etching on shear bond strength of an indirect resin composite to an adhesive cement. Dent Mater J 2008; 27:515-22.
• 11. Uludamar A, Akalın B, Ozkan YK. Zirkonyum esaslı tam seramik restorasyonlarda simantasyon öncesi yüzey hazırlıklar. Cumhuriyet Dent J 2011; 14:140-53.
• 12. Kirmali O, Barutcugil C, Harorli O, Kapdan A, Er K. Resin cement to indirect composite resin bonding: Effect of various surface treatments. Scanning 2015; 37:89-94.
• 13. Moezizadeh M, Ansari ZJ, Fard FM. Effect of surface treatment on micro shear bond strength of two indirect composites. J Conserv Dent 2012; 15:228-32.
• 14. Ahmadizenouz G, Esmaeili B, Taghvaei A, Jamali Z, Jafari T, Amiri Daneshvar F, et al. Effect of different surface treatments on the shear bond strength of nanofilled composite repairs. J Dent Res Dent Clin Dent Prospects 2016; 10:9-16.
• 15. Cavalcanti AN, De Lima AF, Peris AR, Mitsui FH, Marchi GM. Effect of surface treatments and bonding agents on the bond strength of repaired composites. J Esthet Restor Dent 2007; 19:90-8.
• 16. Kirmali O, Kapdan A, Harorli OT, Barutcugil C, Ozarslan MM. Efficacy of ceramic repair material on the bond strength of composite resin to zirconia ceramic. Acta Odontol Scand 2015; 73:28-32.
• 17. Cho SD, Rajitrangson P, Matis BA, Platt JA. Effect of Er, Cr: YSGG laser, air abrasion, and silane application on repaired shear bond strength of composites. Oper Dent 2013; 38:58-66.
• 18. Polat S, Cebe F, Tunçdemir A, Öztürk C, Üşümez A. Evaluation of the bond strength between aged composite cores and luting agent. J Adv Prosthodont 2015; 7:108-14.
• 19. Kimyai S, Mohammadi N, Navimipour EJ, Rikhtegaran S. Comparison of the effect of three mechanical surface treatments on the repair bond strength of a laboratory composite. Photomed Laser Surg 2010; 28:25-30.
• 20. Kirmali O, Kustarci A, Kapdan A, Er K. Efficacy of surface roughness and bond strength of Y-TZP zirconia after various pre-treatments. Photomed Laser Surg 2015; 33:15-21.
• 21. Bonstein T, Garlapo D, Donarummo J Jr, Bush PJ. Evaluation of varied repair protocols applied to aged composite resin. J Adhes Dent 2005; 7:41-9.
• 22. Swift EJ Jr, Cloe BC, Boyer DB. Effect of a silane coupling agent on composite repair strengths. Am J Dent 1994; 7:200-2.
• 23. Brosh T, Pilo R, Bichacho N, Blutstein R. Effect of combinations of surface treatments and bonding agents on the bond strength of repaired composites. J Prosthet Dent 1997; 77:122-6.
• 24. Cesar PF, Meyer Faara PM, Miwa Caldart R, Gastaldoni Jaeger R, da Cunha Ribeiro F. Tensile bond strength of composite repairs on Artglass using different surface treatments. Am J Dent 2001; 14:373-7.
• 25. Harorli OT, Barutcugil C, Kirmali O, Kapdan A. Shear bond strength of a self-etched resin cement to an indirect composite: Effect of different surface treatments. Niger J Clin Pract 2015; 18:405-10.