Research Article
BibTex RIS Cite

Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods

Year 2021, Volume: 3 Issue: 3, 1 - 8, 31.12.2021
https://doi.org/10.46740/alku.896497

Abstract

In this study, the critical buckling load of hybrid composite plates with three layers was analyzed using numerical and statistical methods. Laminated hybrid composite plates were designed using glass-epoxy, boron-epoxy, carbon-epoxy, and metal. The outermost layers of the plates were modelled using fiber reinforced composite materials whereas the innermost layer of plates was created using Aluminum material (Al2024-T3). Numerical buckling behavior was calculated using finite element software ANSYS. Analysis of signal-to-noise ratio was utilized to decide the effects and optimal levels of the plates and their fiber orientation angles on buckling load. Analysis of variance at the 95 % confidence level was employed to indicate the control factors which have significant effect on the buckling responses.

References

  • [1] Evran, S., (2020). "Numerical and statistical buckling analysis of laminated composite plates with functionally graded fiber orientation angles", Polymers and Polymer Composites, 28, 7, 502-512.
  • [2] Evran, S., (2020). "Experimental and statistical free vibration analyses of laminated composite beams with functionally graded fiber orientation angles", Polymers and Polymer Composites, 28, 7, 513-520.
  • [3] Evran, S., (2020). "Investigation of effects of fiber orientation angles on deflection behavior of cantilever laminated composite square plates", Politeknik Dergisi, 23, 3, 633-639.
  • [4] Evran, S., (2020). "Buckling temperature analysis of laminated composite plates with circular and semicircular holes", Eskişehir Technical University Journal of Science and Technology A-Applied Sciences and Engineering, 21, 1, 173-181.
  • [5] Evran, S., (2019). "Twisting angle analysis of laminated composite plates using numerical and statistical methods", Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 23, 2, 466-471.
  • [6] Evran, S., (2019). "Finite element analysis of thermal stress of laminated composite plates using taguchi method", Manas Journal of Engineering, 7, 2, 121-125.
  • [7] Tang, Y. and Wang, X., (2011). "Buckling of symmetrically laminated rectangular plates under parabolic edge compressions", International Journal of Mechanical Sciences, 53, 2, 91-97.
  • [8] Özben, T., (2009). "Analysis of critical buckling load of laminated composites plate with different boundary conditions using fem and analytical methods", Computational Materials Science, 45, 4, 1006-1015.
  • [9] Pekbey, Y. and Sayman, O., (2006). "A numerical and experimental investigation of critical buckling load of rectangular laminated composite plates with strip delamination", Journal of Reinforced Plastics and Composites, 25, 7, 685-697.
  • [10] Arman, Y., Zor, M. and Aksoy, S., (2006). "Determination of critical delamination diameter of laminated composite plates under buckling loads", Composites Science and Technology, 66, 15, 2945-2953.
  • [11] Lee, S.-Y. and Park, D.-Y., (2007). "Buckling analysis of laminated composite plates containing delaminations using the enhanced assumed strain solid element", International Journal of Solids and Structures, 44, 24, 8006-8027.
  • [12] Al Qablan, H., Katkhuda, H. and Dwairi, H., (2009). "Assessment of the buckling behavior of square composite plates with circular cutout subjected to in-plane shear", Jordan Journal of Civil Engineering, 3, 184-195.
  • [13] C W, Y., Chai, G. B. and Parlapalli, M. S. R., (2008). "Effect of flexural stiffness estimates on the buckling load of delaminated composite beams", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 222, 2, 91-102.
  • [14] Heidari-Rarani, M., Khalkhali-Sharifi, S. S. and Shokrieh, M. M., (2014). "Effect of ply stacking sequence on buckling behavior of e-glass/epoxy laminated composites", Computational Materials Science, 89, 89-96.
  • [15] Jeyaprakash, P., Prabhakaran, V. and Devaraju, A., (2018). "Experimental and numerical analysis of carbon epoxy fibre composite under buckling load", Materials Today: Proceedings, 5, 6, Part 2, 14526-14530.
  • [16] Erdem, S., Kaman, M. O. and Gur, M., (2019). "Post-buckling behavior of carbon fiber epoxy composite plates", Journal of Mechanical Science and Technology, 33, 4, 1723-1730.
  • [17] Guo, S., Li, D., Zhang, X. and Xiang, J., (2014). "Buckling and post-buckling of a composite c-section with cutout and flange reinforcement", Composites Part B: Engineering, 60, 119-124.
  • [18] Sudhirsastry, Y. B., Budarapu, P. R., Madhavi, N. and Krishna, Y., (2015). "Buckling analysis of thin wall stiffened composite panels", Computational Materials Science, 96, 459-471.
  • [19] Karakaya, Ş. and Soykasap, Ö., (2011). "Natural frequency and buckling optimization of laminated hybrid composite plates using genetic algorithm and simulated annealing", Structural and Multidisciplinary Optimization, 43, 1, 61-72.
  • [20] Walker, M. and Smith, R. E., (2003). "A technique for the multiobjective optimisation of laminated composite structures using genetic algorithms and finite element analysis", Composite Structures, 62, 1, 123-128.
  • [21] Park, J. H., Hwang, J. H., Lee, C. S. and Hwang, W., (2001). "Stacking sequence design of composite laminates for maximum strength using genetic algorithms", Composite Structures, 52, 2, 217-231.
  • [22] Riche, R. L. and Haftka, R. T., (1993). "Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm", AIAA Journal, 31, 5, 951-956.
  • [23] Topal, U. and Uzman, Ü., (2007). "Optimum design of laminated composite plates to maximize buckling load using mfd method", Thin-Walled Structures, 45, 7, 660-669.
  • [24] Topal, U. and Uzman, Ü., (2009). "Effects of nonuniform boundary conditions on the buckling load optimization of laminated composite plates", Materials & Design, 30, 3, 710-717.
  • [25] Yalçın, B. and Ergene, B., (2018). "Analyzing the effect of crack in different hybrid composite materials on mechanical behaviors", Pamukkale Univ Muh Bilim Derg, 24, 4, 616-625.
  • [26] Ross, P. J. (1996). Taguchi techniques for quality engineering. McGraw-Hill International Editions, 2nd Edition, New York, USA.
  • [27] ANSYS Help, Version 13. (ANSYS Inc, Canonsburg, PA, USA).

Sonlu Elemanlar ve İstatistiksel Yöntemler Kullanılarak Ankastre Tabakalı Hibrit Kompozit Plakaların Burkulma Analizi

Year 2021, Volume: 3 Issue: 3, 1 - 8, 31.12.2021
https://doi.org/10.46740/alku.896497

Abstract

Bu çalışmada üç tabakalı hibrit kompozit plakaların kritik burkulma yükü sayısal ve istatiksel metotlar kullanılarak analiz edilmiştir. Tabakalı hibrit kompozit plakalar cam/epoksi, bor/epoksi, karbon/epoksi ve metal kullanılarak dizayn edilmiştir. Plakaların en üst tabakaları fiberle güçlendirilmiş kompozitlerden modellenirken en iç tabakaları Alüminyum (Al2024-T3) malzemeden oluşturulmuştur. Sayısal burkulma davranışı sonlu elemanlar yazılımı ANSYS kullanılarak hesaplanmıştır. Sinyal-Gürültü oran analizi burkulma davranışı üzerinde plakaların optimal seviyelerini ve fiber oryantasyon açılarının etkilerini karar vermek için kullanıldı. Burkulma yanıtları üzerinde önemli etkiye sahip olan kontrol faktörlerini belirlemek için % 95 güven seviyesinde varyans analizi uygulandı.

References

  • [1] Evran, S., (2020). "Numerical and statistical buckling analysis of laminated composite plates with functionally graded fiber orientation angles", Polymers and Polymer Composites, 28, 7, 502-512.
  • [2] Evran, S., (2020). "Experimental and statistical free vibration analyses of laminated composite beams with functionally graded fiber orientation angles", Polymers and Polymer Composites, 28, 7, 513-520.
  • [3] Evran, S., (2020). "Investigation of effects of fiber orientation angles on deflection behavior of cantilever laminated composite square plates", Politeknik Dergisi, 23, 3, 633-639.
  • [4] Evran, S., (2020). "Buckling temperature analysis of laminated composite plates with circular and semicircular holes", Eskişehir Technical University Journal of Science and Technology A-Applied Sciences and Engineering, 21, 1, 173-181.
  • [5] Evran, S., (2019). "Twisting angle analysis of laminated composite plates using numerical and statistical methods", Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 23, 2, 466-471.
  • [6] Evran, S., (2019). "Finite element analysis of thermal stress of laminated composite plates using taguchi method", Manas Journal of Engineering, 7, 2, 121-125.
  • [7] Tang, Y. and Wang, X., (2011). "Buckling of symmetrically laminated rectangular plates under parabolic edge compressions", International Journal of Mechanical Sciences, 53, 2, 91-97.
  • [8] Özben, T., (2009). "Analysis of critical buckling load of laminated composites plate with different boundary conditions using fem and analytical methods", Computational Materials Science, 45, 4, 1006-1015.
  • [9] Pekbey, Y. and Sayman, O., (2006). "A numerical and experimental investigation of critical buckling load of rectangular laminated composite plates with strip delamination", Journal of Reinforced Plastics and Composites, 25, 7, 685-697.
  • [10] Arman, Y., Zor, M. and Aksoy, S., (2006). "Determination of critical delamination diameter of laminated composite plates under buckling loads", Composites Science and Technology, 66, 15, 2945-2953.
  • [11] Lee, S.-Y. and Park, D.-Y., (2007). "Buckling analysis of laminated composite plates containing delaminations using the enhanced assumed strain solid element", International Journal of Solids and Structures, 44, 24, 8006-8027.
  • [12] Al Qablan, H., Katkhuda, H. and Dwairi, H., (2009). "Assessment of the buckling behavior of square composite plates with circular cutout subjected to in-plane shear", Jordan Journal of Civil Engineering, 3, 184-195.
  • [13] C W, Y., Chai, G. B. and Parlapalli, M. S. R., (2008). "Effect of flexural stiffness estimates on the buckling load of delaminated composite beams", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 222, 2, 91-102.
  • [14] Heidari-Rarani, M., Khalkhali-Sharifi, S. S. and Shokrieh, M. M., (2014). "Effect of ply stacking sequence on buckling behavior of e-glass/epoxy laminated composites", Computational Materials Science, 89, 89-96.
  • [15] Jeyaprakash, P., Prabhakaran, V. and Devaraju, A., (2018). "Experimental and numerical analysis of carbon epoxy fibre composite under buckling load", Materials Today: Proceedings, 5, 6, Part 2, 14526-14530.
  • [16] Erdem, S., Kaman, M. O. and Gur, M., (2019). "Post-buckling behavior of carbon fiber epoxy composite plates", Journal of Mechanical Science and Technology, 33, 4, 1723-1730.
  • [17] Guo, S., Li, D., Zhang, X. and Xiang, J., (2014). "Buckling and post-buckling of a composite c-section with cutout and flange reinforcement", Composites Part B: Engineering, 60, 119-124.
  • [18] Sudhirsastry, Y. B., Budarapu, P. R., Madhavi, N. and Krishna, Y., (2015). "Buckling analysis of thin wall stiffened composite panels", Computational Materials Science, 96, 459-471.
  • [19] Karakaya, Ş. and Soykasap, Ö., (2011). "Natural frequency and buckling optimization of laminated hybrid composite plates using genetic algorithm and simulated annealing", Structural and Multidisciplinary Optimization, 43, 1, 61-72.
  • [20] Walker, M. and Smith, R. E., (2003). "A technique for the multiobjective optimisation of laminated composite structures using genetic algorithms and finite element analysis", Composite Structures, 62, 1, 123-128.
  • [21] Park, J. H., Hwang, J. H., Lee, C. S. and Hwang, W., (2001). "Stacking sequence design of composite laminates for maximum strength using genetic algorithms", Composite Structures, 52, 2, 217-231.
  • [22] Riche, R. L. and Haftka, R. T., (1993). "Optimization of laminate stacking sequence for buckling load maximization by genetic algorithm", AIAA Journal, 31, 5, 951-956.
  • [23] Topal, U. and Uzman, Ü., (2007). "Optimum design of laminated composite plates to maximize buckling load using mfd method", Thin-Walled Structures, 45, 7, 660-669.
  • [24] Topal, U. and Uzman, Ü., (2009). "Effects of nonuniform boundary conditions on the buckling load optimization of laminated composite plates", Materials & Design, 30, 3, 710-717.
  • [25] Yalçın, B. and Ergene, B., (2018). "Analyzing the effect of crack in different hybrid composite materials on mechanical behaviors", Pamukkale Univ Muh Bilim Derg, 24, 4, 616-625.
  • [26] Ross, P. J. (1996). Taguchi techniques for quality engineering. McGraw-Hill International Editions, 2nd Edition, New York, USA.
  • [27] ANSYS Help, Version 13. (ANSYS Inc, Canonsburg, PA, USA).
There are 27 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Makaleler
Authors

Savaş Evran 0000-0002-7512-5997

Publication Date December 31, 2021
Submission Date March 14, 2021
Acceptance Date August 10, 2021
Published in Issue Year 2021 Volume: 3 Issue: 3

Cite

APA Evran, S. (2021). Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods. ALKÜ Fen Bilimleri Dergisi, 3(3), 1-8. https://doi.org/10.46740/alku.896497
AMA Evran S. Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods. ALKÜ Fen Bilimleri Dergisi. December 2021;3(3):1-8. doi:10.46740/alku.896497
Chicago Evran, Savaş. “Buckling Analysis of Cantilever Laminated Hybrid Composite Plates Using Finite Element and Statistical Methods”. ALKÜ Fen Bilimleri Dergisi 3, no. 3 (December 2021): 1-8. https://doi.org/10.46740/alku.896497.
EndNote Evran S (December 1, 2021) Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods. ALKÜ Fen Bilimleri Dergisi 3 3 1–8.
IEEE S. Evran, “Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods”, ALKÜ Fen Bilimleri Dergisi, vol. 3, no. 3, pp. 1–8, 2021, doi: 10.46740/alku.896497.
ISNAD Evran, Savaş. “Buckling Analysis of Cantilever Laminated Hybrid Composite Plates Using Finite Element and Statistical Methods”. ALKÜ Fen Bilimleri Dergisi 3/3 (December 2021), 1-8. https://doi.org/10.46740/alku.896497.
JAMA Evran S. Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods. ALKÜ Fen Bilimleri Dergisi. 2021;3:1–8.
MLA Evran, Savaş. “Buckling Analysis of Cantilever Laminated Hybrid Composite Plates Using Finite Element and Statistical Methods”. ALKÜ Fen Bilimleri Dergisi, vol. 3, no. 3, 2021, pp. 1-8, doi:10.46740/alku.896497.
Vancouver Evran S. Buckling Analysis of Cantilever Laminated Hybrid Composite Plates using Finite Element and Statistical Methods. ALKÜ Fen Bilimleri Dergisi. 2021;3(3):1-8.