Research on the Development of the Semi-Rigid Column Base of Reinforced Concrete: Experimental and Analytical Study on the Column Base with Cross Section Reduced Portion

Year 2020, Volume: 1 Issue: 1, 1 - 12, 19.06.2020

Osamu Takahashı Hirona Yoshida Minoru Oda

Abstract

Generally, in reinforced concrete buildings, joints have been planned as a rigid state due to the characteristics of their construction. In such a building, the stress of the first story column becomes nonuniform since the bending stress at the time of the earthquake is concentrated on the rigid joints of the foundation structure such as the column base at the first story. This paper proposed making the column base at the first story shape semi-rigid to reduce the stress concentrating on the column base at the first story. In order to realize semi-rigid column base, we performed structural experiments and FEM analysis on the column base with cross section reduced portion. As a result, it was concluded that the best structure shape is one with the cross section reduced portion and the taper at the column base as the semi-rigid column base with bending rigidity reduction and structural performance stability.

Keywords

Reinforced concrete, column, semi-rigid, bending rigidity, burst stress

References

• [1] Yoshimatsu Toshiyuki, Nishimura Noriyoshi, Konomi Mitsuo, Isemoto Noriaki, Yamaura Ichiro, Uozumi Masashi et al. “Development of Semi-rigid Connections for Cast-in-place Pile Head.” Summaries of technical papers of annual meeting Architectural Institute of Japan. 2006; Structural 4: 349-366.
• [2] Nagashima Ryutaro, Oda Minoru, Hirata Yuichi, Tano Kenji, Ito Akira and Takaoka Yuji. “An Analytic Study on Semi-rigid Connections for Pile top, Foundation Beam and Column Bottom of First Floor.” Summaries of technical papers of annual meeting Architectural Institute of Japan. 2015; Structural 4: 589-590.
• [3] Hirade Tsutomu, Sugimura Yoshihiro, Funayama Hikoshiro, Satio Tadashi and Murakami Masakatsu. “Experimental Study on Pile Head Joint of High Rotational Freedom System.” Summaries of technical papers of annual meeting Architectural Institute of Japan. 1999; Structural 4: 527-528