Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının

Abstract

Aim: The aim of this study was to evaluate shear bond strengths of new universal adhesive within selfetch and etch-and-rinse strategies on Erbium, Chromium doped Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) laser irradiation dentin surface. Materials and Methods: 60 sound, human third molars were selected and the occlusal enamel of these molars was removed. Those teeth were divided into six groups according to the surface conditioning; Group A: Control (Self-etch mode), Group B: 35% phosphoric acid etching (Etch-and-rinse mode), Group C: 1,25W Er,Cr:YSGG laser irradiation, Group D: 1,5W Er,Cr:YSGG laser irradiation, Group E: 2W Er,Cr:YSGG laser irradiation, finally, Group F: 3W Er,Cr:YSGG laser irradiation. After surface conditioning, new universal adhesive (3M Single Bond Universal, 3M ESPE St.Paul, MN, USA - SBU) was applied to all dentin samples surface and resin composite (Z250 3M ESPE St.Paul, MN, USA) built up and shear bond strength test was performed. Data were analyzed using one-way ANOVA and Tukey HSD multiple compression test. p<0.05 was consider statistically significant. Results: Prior to phosphoric acid etching significantly increased the bonding effectiveness of the SBU to dentin. (p<0.05). However, Er,Cr:YSGG laser irradiation was decreased the bond strength values of SBU with all power settings. Conclusion: While using etch-and-rinse mode definitely improved bonding of the new universal adhesive to dentin, Er,Cr:YSGG laser irradiation cannot be considered as an alternative for surface treatment methods.

Keywords

• Shear Strength, YSGG Lasers, Dentin Bonding agents.

Farklı yüzey işlemleri uygulanmış dentine üniversal bağlayıcı ajanın bağlanma dayanımının

Abstract

Amaç: Bu çalışmanın amacı yeni üniversal bağlayıcı ajanın, self-etch ve etch-and-rinse modlarında kullanımının ve dentin üzerine Erbiyum, kromyum: ytriyum skandiyum galyum garnet (Er,Cr:YSGG) lazer uygulamasının makaslama bağlanma dayanımına etkilerini incelemektir. Gereç ve Yöntem: 60 adet sağlam üçüncü büyük azıdişi seçilmiş ve okluzal mineleri uzaklaştırılmıştır. Dişler yüzey işlemine göre altı gruba ayrılmıştır; Grup A: Kontrol (Self-etch modu), Grup B: %35 fosforik asit ile yüzeyin dağlanması (Etch-and-rinse modu), Grup C: 1,25W Er,Cr:YSGG lazer uygulaması, Grup D: 1,5W Er,Cr:YSGG lazer uygulaması, Grup E: 2W Er,Cr:YSGG lazer uygulaması, son olarak Grup F: 3W Er,Cr:YSGG lazer uygulaması. Yüzey işlemlerinin ardından dentin yüzeylerine üniversal bağlayıcı ajan (3M Single Bond Universal, 3M ESPE St.Paul, MN, ABD - SBU) uygulanmış ve üzerine kompozit (Z250 3M ESPE St.Paul, MN, ABD) yapılmasından sonra makaslama bağlanma dayanımı testi yapılmıştır. Veriler tek yönlü varyans analizi ve Tukey HSD çoklu karşılaştırma testi ile değerlendirilmiştir. p<0.05 istatistiksel anlamlılık seviyesi olarak belirlenmiştir. Bulgular: Fosforik asit uygulanmasının SBU ile dentin arasındaki bağlanma dayanımı önemli derecede arttırdığı bulunmuştur. (p<0.05). Ancak, Er,Cr:YSGG lazer uygulamasının hangi güç seçeneğinde olursa olsun SBU'nun dentine bağlanma dayanımını değerlerini azalttığı belirlenmiştir. Sonuç: Bu yeni universal adezivin etch-and-rinse olarak kullanılmasının dentine bağlanma dayanımını arttırdığı, Er,Cr:YSGG lazerin ise yüzey işlemleri arasında bir alternatif olamayacağı gösterilmiştir.

Keywords

• Kayma mukavemeti, YSGG Lazerleri, Dentin Bağlayıcı ajan

References

1. Van Meerbeek B, De Munck J, Yoshida Y, et al. Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges. Oper Dent 2003;28:215-35.
2. Peumans M, Kanumilli P, De Munck J, et al. Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dent Reis A, Pellizzaro A, Dal-Bianco K, et al. Impact of adhesive application to wet and dry dentin on long-term resin-dentin bond strengths. Oper Dent 2007;32:380-7.
3. Dal-Bianco K, Pellizzaro A, Patzlaft R, et al. Effects of moisture degree and rubbing action on the immediate resin-dentin bond strength. Dent Mater 2006;22:1150-6.
4. Spencer P, Swafford JR. Unprotected protein at the dentin-adhesive interface. Quintessence Int 1999;30:501-7.
5. Pioch T, Staehle HJ, Wurst M, Duschner H, Dorfer C. The nanoleakage phenomenon: influence of moist vs dry bonding. J Adhes Dent 2002;4:23-30.
6. Sano H. Microtensile testing, nanoleakage, and biodegradation of resin-dentin bonds. J Dent Res 2006;85:11-4.
7. Breschi L, Mazzoni A, Ruggeri A, et al. Dental adhesion review: aging and stability of the bonded interface. Dent Mater 2008;24:90-101.
8. Hashimoto M, Ohno H, Kaga M, et al. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 2000;79:1385-91.

9. Peumans M, De Munck J, Van Landuyt KL, et al. Eight-year clinical evaluation of a 2-step self-etch adhesive with and without selective enamel etching. Dent Mater 2010;26:1176-84.
10. Erickson RL, Barkmeier WW, Latta MA. The role of etching in bonding to enamel: A comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater 2009;25:1459-67.
11. Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent 2012;40:475-84.
12. Perdigao J, Sezinando A, Monteiro PC. Laboratory bonding ability of a multi-purpose dentin adhesive. Am J Dent 2012;25:153-8.
13. Lee BS, Lin PY, Chen MH, et al. Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. Dent Mater 2007;23:570-8.
14. Karaarslan EŞ, Yıldırım C, Üşümez A. Restoratif tedavide lazer uygulamaları. Atatürk Üniv Diş Hek Fak Derg 2012;22:340-9.
15. Chimello-Sousa DT, de Souza AE, Chinelatti MA, et al. Influence of Er : YAG laser irradiation distance on the bond strength of a restorative system to enamel. J Dent 2006;34:245-51.
16. Hossain M, Nakamura Y, Tamaki Y, et al. Atomic analysis and knoop hardness measurement of the cavity floor prepared by Er,Cr:YSGG laser irradiation in vitro. J Oral Rehabil 2003;30:515-21. Chenard T, Amodeo M, Caputo AA, Rizoiu I. Composite resin bond strength to primary dentin prepared with Er,Cr : YSGG laser. J Dent Res 2003;82:B333-B33.
17. Uysal D, Güler Ç. Diş Hekimliğinde lazer: Bir literatür derlemesi. Atatürk Üniv Diş Hek Fak Derg 2012; Suppl 6:44-53.
18. Hossain M, Nakamura Y, Yamada Y, et al. Analysis of surface roughness of enamel and dentin after Er,Cr:YSGG laser irradiation. J Clin Laser Med Surg 2001;19:297-303.
19. De Munck J, Van Meerbeek B, Yudhira R, Lambrechts P, Vanherle G. Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur J Oral Sci 2002;110:322-9.
20. Bertrand MF, Semez G, Leforestier E, et al. Er : YAG laser cavity preparation and composite resin bonding with a single-component adhesive system: Relationship between shear bond strength and microleakage. Lasers Surg Med 2006;38:615-23.
21. De Munck J, Van Landuyt K, Peumans M, et al. A critical review of the durability of adhesion to tooth tissue: methods and results. J Dent Res 2005;84:118-32.
22. Moll K, Fritzenschaft A, Haller B. In vitro comparison of dentin bonding systems: effect of testing method and operator. Quintessence Int 2004;35:845-52.
23. Swift EJ, Jr., Perdigao J, Heymann HO. Bonding to enamel and dentin: a brief history and state of the art, 1995. Quintessence Int 1995;26:95-110.
24. Erickson RL, Barkmeier WW, Latta MA. The role of etching in bonding to enamel: a comparison of self-etching and etch-and-rinse adhesive systems. Dent Mater 2009;25:1459-67.
25. Yoshida Y, Yoshihara K, Nagaoka N, et al. Selfassembled Nano-layering at the Adhesive Interface. J Dent Res 2012;91:376-81.
26. Mitra SB, Lee CY, Bui HT, Tantbirojn D, Rusin RP. Long-term adhesion and mechanism of bonding of a paste-liquid resin-modified glass-ionomer. Dent Lin A, Mcintyre NS, Davidson RD. Studies on the Adhesion of Glass-Ionomer Cements to Dentin. J Dent Res 1992;71(11):1836-41.
27. Mena-Serrano A, Kose C, De Paula EA, et al. A New Universal Simplified Adhesive: 6-Month Clinical Evaluation. J Esthet Rest Dent 2013;25:55
28. Munoz MA, Luque I, Hass V, et al. Immediate bonding properties of universal adhesives to dentine. J Dent 2013;41:404-11.
29. Hanabusa M, Mine A, Kuboki T, et al. Bonding effectiveness of a new 'multi-mode' adhesive to enamel and dentine. J Dent 2012;40:475-84.
30. Niu W, Eto JN, Kimura Y, Takeda FH, Matsumoto K. A study on microleakage after resin filling of Class V cavities prepared by Er:YAG laser. J Clin Laser Med Surg 1998;16:227-31.
31. Goncalves M, Corona SA, Borsatto MC, Silva PC, Pecora JD. Tensile bond strength of dentinresinous system interfaces conditioned with Er:YAG laser irradiation. J Clin Laser Med Surg 2002;20:89-93.
32. Visuri SR, Gilbert JL, Wright DD, Wigdor HA, Walsh JT, Jr. Shear strength of composite bonded to Er:YAG laser-prepared dentin. J Dent Res 1996;75:599-605.
33. Ceballo L, Toledano M, Osorio R, Tay FR, Marshall GW. Bonding to Er-YAG-laser-treated dentin. J Dent Res 2002;81:119-22.
34. Sassi JF, Chimello DT, Borsatto MC, et al. Comparative study of the dentin/adhesive systems interface after treatment with Er : YAG laser and acid etching using scanning electron microscope. Lasers Surg Med 2004;34:385-90.
35. Cardoso MV, Coutinho E, Ermis RB, et al. Influence of Er,Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J Adhes Dent 2008;10:25-33.
36. Gurgan S, Kiremitci A, Cakir FY, et al. Shear bond strength of composite bonded to erbium:yttriumaluminum-garnet laser-prepared dentin. Lasers Med Sci 2009;24:117-22.
37. Chou JC, Chen CC, Ding SJ. Effect of Er,Cr:YSGG laser parameters on shear bond strength and microstructure of dentine. Photomed Laser Surg 2009;27:481-6.
38. Lin S, Caputo AA, Eversole LR, Rizoiu I. Topographical characteristics and shear bond strength of tooth surfaces cut with a laser-powered hydrokinetic system. J Prosthet Dent 1999;82:451 Yazışma Adresi: Yrd.Doç.Dr.Çağatay Barutcigil, Akdeniz Üniversitesi Diş Hekimliği Fakültesi
39. Restoratif Diş Tedavisi Anabilim Dalı 07058/Antalya - Türkiye Tel: [phone] Faks: 902423106967
40. Email: [e-mail]