Farkli Polimerizasyon Sürelerinin Akrilik Rezinlerin Su Emilimi Üzerine Etkisi

Abstract

Purpose: The purpose of this study was to compare the water sorption of four different heat-polymerized acrylic resins which polymerized in a regular time and a period of two times the normal range. Material and Methods: Heat-polymerized acrylic resins are QC-20, Vertex, Meliodent and Paladent-20. Water sorption was measured after 1 day, 1 week and 1 month. Water sorption analyzed with two-way analysis of variance (ANOVA) and Duncan test. Results: The results indicated that the values of water sorption for 1 week and 1 month was observed a significant difference between the groups. (p The values of water sorption for the samples much polymerized, was significantly high. Conclusion: Different heat-polymerized acrylic resins showed different water sorption in case of polymerized in a regular time and a period of two times the normal range.

Keywords

• Acrylic resin, Water sorption, Polymerization

The Effect Of Different Polymerization Periods On Water Sorption Of Acrylic Resins

Abstract

Amaç: Bu çalışmanın amacı normal sürede ve normal sürenin iki katı sürede polimerize edilen dört farklı sıcak akrilik rezinde su emilimini değerlendirmektir. Gereç ve Yöntem: Sıcak akrilik rezinler QC-20, Vertex, Meliodent ve Paladent-20' dir. Su emilimleri 1 gün, 1 hafta ve 1 ay sonra değerlendirildi. Su emilim değerleri iki-yönlü varyans analizi ve Duncan testi ile analiz edildi. Bulgular: Sonuçlar 1 hafta ve 1 aylık su emilim değerleri gruplar arasında önemli farklılıklar göstermiştir. ( p değerleri önemli derecede fazladır. Sonuç: Normal sürede ve normal sürenin iki katı sürede polimerize edilen farklı sıcak akrilik rezinler farklı su emilim değerleri göstermiştir.

Keywords

• Akrilik rezin, Su emilimi, Polimerizasyon

References

1. Spencer HR, Gariaeff P. The present status of vulcanite versus plastics as a base plate material. Contact Point 1949; 27/28: 263-7.
2. Braden M.The absorption of water by acrylic resins and other materials. J Prosthet Dent 1964; 14: 307-16
3. Braden M, Wright PS. Water absorption and water solubility of soft lining materials for acrylic dentures. J Dent Res 1983; 62: 764-8.
4. Pamir AD, Ulusoy M. Akriliklerin su emmesi. Ankara Üniv Diş Hek. Fak. Derg 1976; 3: 29-35.
5. Phillips RW. Skinner’s Science of Dental Materials. 9 th ed Philadelphia: WB. Saunders Comp 1991, p. 177-213.
6. Anderson JN. Applied Dental Materials. 5 th ed Oxford-London: Blackwell Scientific Publication 19 Craig RG,Peyton FA. Restorative Dental Materials. 5 th ed, St. Louis: The CV. Mosby Comp 1975. P.221.
7. Zaimoğlu A, Can G, Ersoy E, Aksu L. Diş Hekimliğinde Maddeler Bilgisi. AÜ. Basımevi, Ankara, 1993.
8. Woelfel JB, Poffenbarger GC, Sweeney WT. Some physical properties of organic denture base materials. J Am Dent Assoc 1963; 67: 489.

9. Dixon DL, Extrand KG, Breeding LC. The transverse strengths of three denture base resins. J Prosthet Dent 1991; 66: 510.
10. Fuji K. Fatique properties of acrylic denture base resins. Dent Mater J 1989; 8: 243.
11. Karaağaçlıoğlu L, Kalıpcılar B, Hasanreisoğlu U. Oda ısısında polimerize olan enjeksiyon akriliklerin su emilimi-çözünürlük ve yüzey özelliklerinin değerlendirilmesi. Ankara Üniv Diş Hek Fak Derg 1988: 15: 59-64.
12. Philips RW. Skinner’s of Dental Materials. 7th ed. London: WB Saunders Co 1973: 202-25.
13. Yavuzyılmaz H, Burgaz Y, Bek B. Isı basınç ve ışın ile sertleşen protez kaidelerinin su emme ve çözünme değerlerinin araştırılması. Hacettepe Diş Hek Fak Derg 1987; 11: 29-38.
14. Winkler S. Denture base resins. Dent Clin North Am 1989; 28: 287-95.
15. Ristic B, Carr L. Water sorption by denture acrylic resin and consequent change in vertical dimension. J Prost Dent 1987; 58: 689-92.
16. Açıkgöz O. Dişhekimliğinde Maddeler Bilgisi,1996; 1
17. Craig RG, O’Brien WJ, Powers JM. Dental Materials: Properties and Manipulation . MosbyYear Book, Inc. Missouri, United States of America, 1992.
18. Dar-Odeh NS, Harrison A, Abu-Hammad O. An evaluation of self-cured and visible light-cured denture base materials when used as a denture base repair material. J Oral Rehabil 1997; 24: 755Kelly EK. Flexure fatigule resistance of heatcuring and coldcuring polymethylmethacrylate. JADA 1967; 74: 1273-76.
19. Reitz PV, Sanders JL, Levin B. The curing of denture acrylic resins by microwave energ.Physical properties. Quint Int 1985; 8: 547Sanders Jl, Levin B, Reitz PV. Porosity in acrylic resins cured by microwave energ. Quint Int 1987; 18: 453-6.
20. Takahashi Y, Kawaguchi M, Chai J. Flexural strength at the proportional limit of a denture base material relined with four different denture reline materials. Int J Prosthodont 1997; 10: 508Williamson DL, Boyer DB, Aquilino Sa, Leary JM. Effect of polyethylene fiber reinforcement on the strength of denture base resins polymerized by microwave energy. J Prosthet Dent 1994; 72: 635Baydaş S. Total Protazler Ders Notları. Atatürk Üniv Diş Hek Fak 2005; 86-7.
21. Çalıkkocaoğlu S. Diş Hekimliğinde Maddeler Bilgisi ( Metal Olmayan Maddeler). Yeditepe Üniv Diş Hek Fak 2000; 96.
22. American Dental Association (ADA): Guide to dental materials and devices. 6th ed. 1972-1973. Barsby MJ. A denture base resin with low water absorption. J Dent 1992; 20: 240-4.
23. Henriks-Eckerman ML, Suuronen K, Jolanki R, Alanko K. Methacrylates in dental restorative materials. Contact Dermatitis 2004; 50: 233– 40. Goon ATJ, Isaksson M, Zimerson E, Goh CL, Bruze M. Contact allergy to (meth)acrylates in the dental series in southern Sweden: simultaneous positive patch test reaction patterns and possible screening allergens. Contact Dermatitis 2006; 55: 219–45.
24. Dogan A, Bek B, Cevik NN, Usanmaz A. The effect of preparation conditions of acrylic denture base materials on the level of residual monomer, mechanical properties and water absorption. J Dent 1995;23:313-8.
25. Boeckler AF, Morton D, Poser S, Dette KE. Release of dibenzoyl peroxide from polymethyl methacrylate denture base resins: an in vitro evaluation. Dent Mater 2008; 24: 1602-9.
26. Wiltshire WA, Ferreira MR, Ligthelm AJ. Allergies to dental materials. Quintessence Int 1996; 27: 513Jagger RG. Effect of the curing cycle on some properties of a polymethylmethacrylate denture base material. J Oral Rehabil 1978; 5:151-7.
27. Umemoto K, Kurata S. Basic study of a new denture base resin applying hydrophobic methacrylate monomer. Dent Mater 1997;16:21 Yazışma Adresi: Dt. Hatice ÖZDEMİR
28. Atatürk Üniversitesi Diş Hekimliği Fakültesi Protetik Diş Hastlk. AD. ERZURUM e-mail: [e-mail]