PROTEZ KAİDESİNE REZİN DİŞLERİN BAĞLANMA DİRENCİNİN İNCELENMESİ

Abstract

-

Keywords

• -

EXAMINATION OF BOND STRENGTH OF RESIN TEETH TO DENTURE RESINS

Abstract

Farklý marka akrilik diþlere farklý restoratifmateryallerin baðlanma kuvvetlerini incelemek vemonomer uygulamanýn etkisini deðerlendirmek amacýile bu çalýþma yapýldý.Bu amaçla, kliniðimizde rutin olarak kullanýlaniki ayrý firmaya ait iki farklý akrilik rezin santral diþ verestorasyon için üç farklý protez rezin materyali (ýsý ilepolimerize akrilik, otopolimerizan akrilik ve ýþýklapolimerize kompozit rezin) kullanýldý. Toplam 60santral diþin yarýsýna (her grupta eþit sayýda olacak þekilde) monomer uygulandý, diðer yarýsýna uygulanmadý). Diþlerin bir kýsmýna (5 monomerli, 5 monomersiz diþ) otopolimerizan akrilik, bir kýsmýna ýsý ilepolimerize akrilik ve bir kýsmýna da ýþýkla sertleþenkompozit uygulandý. Daha sonra baðlanma kuvvetinitespit edebilmek için Haunsfield çekme- sýkýþtýrmacihazýnda 130o açý ile kuvvet uygulandý.Elde edilen veriler varyans analizi ile deðerlendirildi. Kullanýlan tamir materyalinin ve monomeruygulamanýn çok önemli (p

Keywords

• Akrilik rezin diþler, tamirmateryali, baðlanma kuvveti

References

1. Caswell CW, Norling BK. Comparative study of the bond strengths of three abrasion-resistant plastic denture teeth bonded to a cross-linked and a graft- ed. Grafted, cross-linked denture base material. J Prosthet Dent 1986; 55:701-708.
2. Morrow RM, Matvias FM, Windeler AS, Fuchs RS. Bonding of plastic teeth to two heat-curing denture base resins. J Prosthet Dent 1978; 39: 565-568.
3. Rupp NW, Bowen RL, Paffenbarger GC. Bonding cold curing denture base acrylic resin to acrylic resin teeth. J Am Dent Assoc 1971; 83: 601-606.
4. Spratley MH. An investigation of the adhesion of acrylic resin teeth to denture. J Prosthet Dent 1987; 58: 389-392.
5. Craig RG. Restorative Dental Materials. 6 th Ed The CV Mosby Co, St Louis, 1972: 355-386.
6. Phillips RW. Skinner's Science of Dental Materials. 7 th Ed, W.B. Saunders Co, Philadelphia, 1973: 215-223.
7. Cunningham JL. Bond strength of denture teeth to acrylic bases. J Dent 1993; 21: 274-280.
8. Andreopoulos AG, Polyzois, GL. Repair of denture base resins using visible light cured materials. J Prosthet Dent 1994; 72: 462-468.

9. Beyli MS, von Fraunhofer JA. Repair of fractured acrylic resin. J Prosthet Dent 1980; 44: 497-503.
10. Andreopoulos AG, Polyzois GL, Demetriou PP. Repairs with visible light-curing denture base materials. Quintessence Int 1991; 22: 703-706.
11. Dar-Odeh NS, Harrison A, Abu-Hammad O. An evaluation of self cured and visible light- cured denture base materials when used as a denture base repair material. J Oral Rehabil 1997; 24: 755-760.
12. Stameisen AE, Ruffino A. Replacement of lost or broken denture teeth with composites. J Prosthet Dent 1987; 58:119-120.
13. Yýldýz N, Akbulut Ö, Bircan H. Ýstatistiðe Giriþ. Uygulamalý Temel Bilgiler Çözümlü ve Cevaplý Sorular. Erzurum, 1999.
14. Geerts GA, Jooste CH. A comparison of the bond strengths of microwave-and water bath-cured den- ture material. J Prosthet Dent 1993; 70: 406-409.
15. Vergani CE, Machado AL, Giampaolo ET, Pavarina AC. Effect of surface treatments on the bond strength between composite resin and acrylic resin denture teeth. Int J Prosthodont 2000;13: 383-386.
16. Clancy JM, Boyer DB. Comparative bond strengths of light-cured, heat- cured and autopoly- merizing denture resins to denture teeth. J Prosthet Dent 1989; 61: 457-462.
17. Clancy JM, Hawkins LF, Keller JC, Boyer, DB. Bond strength and failure analysis of light-cured denture resins bonded to denture teeth. J Prosthet Dent 1991; 65: 315-324.
18. Hayakawa I, Hirano S, Nagao M, Matsumoto T, Masuhara E. Adhesion of new light-polymerized denture base materials. Int J Prosthodont 1991;4: 561-568.
19. Kawara M, Carter JM, Ogle RE, Johnson RR. Bonding of plastic teeth to denture base resins. J Prosthet Dent 1991; 66:566-571.
20. Yanýkoglu DN, Duymus DZ, Bayýndýr DF. Comparative bond strengths of autopolymerizing denture resin and light cured composite resin to denture teeth. Int Dent J 2002; 52: 20-24.
21. Cunningham JL. Shear bond strength of resin teeth to heat-cured and light-cured denture base resin. J Oral Rehabil 2000; 27: 312-316.
22. Takahashi Y, Chai J, Takahashi T, Habu T. Bond strength of denture teeth to denture base resins. Int J Prosthodont 2000; 13: 59-65.
23. Shen C, Colaizzi FA, Birns B. Strength of denture repairs as influenced by surface treatment. J Prosthet Dent 1984; 52: 844-848.
24. Cook WD, Beech DR, Tyas MJ. Structure and properties of methacrylate based dental restorative materials. Biomaterials 1985; 6: 362-368.
25. Ogle RE, Sorensen SE, Lewis EA. A new visible light-cured resin system applied to removable prosthodontics. J Prosthet Dent 1986; 56: 497-506.
26. Chung RWC, Clark RK, Darvell BW. The bonding of cold-cured acrylic resin to acrylic denture teeth. Aust Dent J 1995; 40: 241-245.
27. Huggett R, John G, Jagger RG, Bates JF. Strength of the acrylic denture base tooth bond. Br Dent J 1982;153: 187-190.
28. Vallittu PK, Lassila VP, Lappalainen R. Wetting the repair surface with methyl metacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent 1994: 72: 639-643.
29. Yesil Z, Yýlmaz A. An investigation of the bond strength of plastic teeth to heat-cured denture base resins. Ege Üniv Diþ Hek Fak Derg 1999; 20:1-7.
30. Sorensen SE, Fjeldstad E. Bonding of plastic teeth to acrylic denture base material. J Dent Res 1961; 40: 776-779.
31. Papazoglou E, Vasilas AI. Shear bond strenths for composite and autopolymerized acrylic resins bonded to acrylic resin denture teeth. J Prosthet Dent 1999; 82: 573-578.
32. Fletcher AM, Al-Mulla MA, Amin WM, Dodd AW, Richie GM. A method of improving the bonding between artificial teeth and PMMA. J Dent 1985; 13: 102-108.
33. Please send all correspondence to:
34. Dr. Zeynep YEÞÝL DUYMUÞ
35. Atatürk Üniversitesi,
36. Diþ Hekimliði Fakültesi,
37. Protetik Diþ Tedavisi Anabilim Dalý,
38. Erzurum,TÜRKÝYE (TURKEY).
39. Phone : [phone]
40. Fax : [phone]
41. E-mail : [e-mail]