IN VITRO INVESTIGATION OF EFFECT OF THERMOCYCLING ON MICROLEAKAGE IN CLASS V COMPOSITE RESTORATIONS

Year 2010, Volume: 2010 Issue: 2, 105 - 113, 01.02.2010

Yrd. Doç. Mehmet Dallı Doç. Dr. Ertuğrul Ercan Yrd. Doç. Bayram İnce Dt. Hakan Çolak Dt. Emrullah Bahşi Dt. Cafer Şahbaz Dr.serdar Bağlar

Abstract

-

Keywords

-

TERMAL SİKLUSUN MİKROSIZINTIYA ETKİSİNİN SINIF V KAVİTELERDE KOMPOZİT RESTORASYONLARDA İN VİTRO İNCELENMESİ

Abstract

Amaç: Bu çalışmanın amacı, termal siklusun sınıf V restorasyonlarda mikrosızıntısı üzerine etkisini in vitro koşullarda değerlendirmekti. Gereç ve Yöntem: Bu çalışmada 150 adet çürüksüz insan molar dişi kullanıldı. Dişlerin bukkal yüzeylerinde standardize sınıf V kaviteler hazırlandı. Her grupta 30 adet olacak şekilde dişler rastgele beş gruba ayrıldı. 1.grup: Clearfil S3 Bond, 2.grup: Xeno V, 3.grup: G Bond 4.grup: Optibond All In One 5.grup: iBond. Restorasyonlarda üretici firma tavsiyelerine uyuldu. Daha sonra dişler iki eşit (n=15) gruba ayrıldı. Birinci gruptaki dişlere (n=15) 55°C termal siklus işlemi 10.000 kez uygulandı. 2.gruba ise uygulanmadı. Tüm dişlerdeki dolguların 1 mm çevresi hariç dişler tamamen 2 kat tırnak cilası ile kaplandıktan sonra 24 saat 37 0C de % 0.5’lik metilen mavisinde bekletildi. Örneklerden alınan kesitlerin mikrosızıntı dereceleri stereomikroskop altında skorlandı. Elde edilen sonuçlar istatistiksel olarak Kruskal-Wallis ve Mann Whitney U testleri ile değerlendirildi. Bulgular: Gruplar arası mikrosızıntı skorlarında istatistiksel farklılık olduğu tespit edildi(p

Keywords

Mikrosızıntı, termal siklus, adeziv sistem, boya penetrasyonu, sınıf V kavite

References

• Dayangaç GB. Kompozit rezin restorasyonlar. Güneş Kitapevi Ltd. Şti.,Ankara, 2000:1-99.
• Knezevic A, Tarle Z, Meniga A, Sutalo J, Pichler G, Ristic M. Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes. J Oral Rehab 2001;28: 586–91.
• Hickel R, Dasch R, Janda M, Tyas M, Anusavice K. New direct restorative materials. Int Dent J 1998; 48: 3–16.
• Sheth PJ, Jensen ME, Sheth JJ. Comparative evaluation of three resin inlay techniques: microleakage studies. Quintessence Int 1989; 20: 831–6.
• Pashley DH, Sano, H, Ciucchi B, Yoshiyama M, Carvalho RM. Adhesion testing of dentin bonding agents: a review. Dent Mater 1995;11: 117–125.
• Pashley DH, Carvolho RM. Dentin permeability and dentin adhesion. J Dent 1997; 25: 355–372.
• Ceballos L, Camejo DG, Fuentes MV, Osorio R, Toledano Microtensile bond strength of total-etch and self- etching adhesives to caries-affected dentine. J Dent 2003;31;469–477. RM, Pashley DH.
• Watanabe I, Nakabayashi N, Pashley DH. Bonding to ground dentin by a phenyl-P self-etching primer. J Dent Res. 1994;73: 1212–20.
• Van Meerbeek B, Landuyt KV, DeMunck J, Hashimoto M, PeumansM, Lambrechts P, Yoshida Y, Inoue S, Suzuki K, Biomat L. Technique sensivity of contemporary adhesives. Dent. Mater. 2005;24: 1–13.
• Van Meerbeek B, Munck JD, Yoshida Y, Inoue S, Vargas MA, Vijay P, Landuyt KV, Lambrechts P, Vanherle G. Adhesion to enamel and dentin: Current status and future challenges. Oper Dent. 2003;28; 215–35. 2002;71: 10-4.
• Oliveira SS, Marshall SJ, Hilton JF, Marshall GW. Etching kinetics of a self-etching primer. Biomater. 2002;23: 4105–12.
• Burke FJ. What’s new in dentine bonding? Self- etch adhesives. Dent Update. 2004;31: 580–2, 584-6, 588-9.
• Leinfelder KF, Kurdziolek SM. Self-etching bonding agents. Compend Contin Educ Dent 2003; 24: 447-57.
• Sensi LG, Lopes GC, Monteiro S Jr, Baratieri LN, Vieira LC. Dentin bond strength of self-etching primers/adhesives. Oper Dent 2005;30:63-8.
• Watanabe I, Nakabayashi N, Pashley DH. Bonding to ground dentin by a phenyl-P self-etching primer. J Dent Res 1994;73:1212-20.
• Erdilek D, Dörter C, Koray F, Kunzelmann KH, Efes BG, Gomec Y. Effect of Thermo-mechanical Load Cycling on Microleakage in Class II Ormocer Restorations. Eur J Dent. 2009 ;3:200-5.
• Hakimeh S, Vaidyanathan J, Houpt ML, Vaidyanathan TK, Von Hagen S. Microleakage of compomer Class V restorations: Effect of load cycling, thermal cycling and cavity shape differences. J Prosthet Dent.2000;83:194–203.
• Kubo S, Yokota H, Sata Y, Hayashi Y. Microleakage of self-etching primers after thermal and flexural load cycling. Am J Dent. 2001;14:163–9.
• Pazinatto FB, Campos BB, Costa LC, Atta MT. Effect of the number of thermocycles on microleak- age of resin composite restorations. Pesqui Odontol Bras. 2003;17:337-41.
• Wendt SL, Mclimes PM, Dickinson GL. The effect og thermocycling in microleakage analysis. Dent Mater 1992; 8:181-4.
• Crim GA, Sarartz ML, Philipps RW. Comparison of four thermocycling techniques. J Prosthet Dent 1985; 53:50-3.
• Jang KT, Chung DH, Shin D, Garcia-Godoy F. Effect of eccentric load cycling on microleakage of Class V flowable and packable composite resin restorations. Oper Dent. 2001;26:603–8.
• Türkün LS, Çelik EU. Farklı kavite tiplerinde kendinden sızıntılarının incelenmesi. EÜ Dis Hek Fak Derg 2004;25:55-61. sistemlerin kenar
• Manhart J, Chen HY, Mehl A, Weber K, Hickel R. Marginal quality and microleakage of adhesive class V restorations. J Dent 2001;29:123-30.
• Wahab FK, Shaini FJ, Morgano SM. The effect of thermocycling commercially restoration in vitro. J Prosthet Dent 2003;90:168- 74. of several composite class V
• Tanrıverdi FF, Belli S, Alptekin T. İki dentin bonding incelenmesinde iki farklı yöntemin karsılastırılması. Ank Ünv Dis Hek Derg 1995;22:1-6. sızıntısının
• Bedran-de-Castro AK, Cardoso PE, Ambrosano GM, Pimenta LA.Thermal and mechanical load cycling on microleakage and shear bond strength to dentin. Oper Dent 2004;29:42-8.
• Mitsui Fabio HO, Bedrande-de-Castro Ana KB, Ritter AV, Cardoso Paulo EC, Pimenta Luis AF. Influence of load cycling on marginal microleakage with two self-etching and two one-bottle dentin adhesive systems in dentin. J Adhes Dent 2003;5:209-16.
• Crim GA, Garcia-Godoy F. Microleakage: the effect of storage and cycling duration. J Prosthet Dent. 1987;57:574-6.
• Trowbridge Hon Model systems for determining biologic effects of microleakage. Oper Dent. 1987;12:164-72.
• Leloup G, D'Hoore W, Bouter D, Degrange M, Vreven J. Meta-analytical review of factors involved in dentin adherence. J Dent Res 2001; 80:1605- 1614.
• Gale M, Darvell B. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27:89-99.
• Nikaido T, Kunzelmann K, Chen H, Ogata M, Harada N, Yamaguchi S, Cox CF, Hickel R, Tagami J. Evaluation of thermal cycling and mechanical loading on bond strength of a self-etching primer system to dentin. Dent Mater 2002;18:269-275.
• Ülker M. Yapay yaşlandırma işlemlerinin self-etch adezivlerin dentine bağlanma dayanımlarına ve bağlanma ara yüzeylerine etkisinin incelenmesi (mikrotensile, SEM, TEM çalışması). S Ü Diş Hek Fak Sağlık Bilimleri Doktora Tezi. Konya, 2006.
• Lucena-Martin C, Gonzalez-Rodriguez MP, Ferrer- Luque CM, Robles-Gijon V, Navajas JM. Influence of time and thermocycling on marginal sealing of several dentin adhesive systems. Oper Dent. 2001;26:550-5.
• Owens BM, Johnson WW. Effect of new generation surface sealants on the marginal permeability of Class V resin composite restorations. Oper Dent. 2006 ;31:481-8.
• Aguiar FH, Santos AJ, Franca FM, Paulillo LA, Lovadino JR. A quantitative method of measuring the microleakage of thermocycled or non- thermocycled posterior tooth restorations. Oper Dent. 2003;28:793-9
• Nalcai A, Ulusoy N. Effect of thermocycling on microleakage of resin composites polymerized with LED curing techniques. Quintessence Int. 2007 ;38:e433-9
• Yamazaki PCV, Bedran-Russo AKB, Pereira PNR, Swift Jr EJ. Microleakage evaluation of a new low- shrinkage composite restorative material. Oper Dent 2006;31:670- 676.
• Kubo S, Yokota H, Sata Y, Hayashi Y. Microleakage of self-etching primers after thermal and flexural load cycling. Am J Dent. 2001;14:163-9.