Review
BibTex RIS Cite

DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER

Year 2016, Volume: 26 Issue: 3, 524 - 533, 01.12.2016

Merve Tokgöz Çetindağ Ayşef Meşe

https://doi.org/10.17567/ataunidfd.290443

Abstract

 CAD/CAM sistemleri (bilgisayar
destekli tasarım/ bilgi- sayar destekli üretim) diş hekimliğinde 1985 yılından
beri kullanılmaktadır. Son 30 yılda teknolojinin ilerle- mesiyle üstün
özelliklerde çeşitli klinik ve laboratuvar CAD/CAM sistemleri geliştirilmeye
devam etmektedir. Özellikle hasta başında kullanılan CAD/CAM sistem- lerinin
yaygınlaşması ile birlikte protetik tedavilerin tek seansta bitirilmesi
amaçlanarak, laboratuvar aşama- larının elimine edilmesini sağlayacak
materyallerin gelişimi hızlanmıştır. Bu derlemede günümüzde diş hekimliğinde
kullanılan CAD/CAM sistemleri ve materyaller anlatılmıştır.



Anahtar kelimeler: CAD/CAM, materyaller, sistemler

DENTAL CAD/CAM
(COMPUTER AIDED DESIGN/COMPUTER AIDED MANUFACTURING) SYSTEMS AND MATERIALSABSTRACT



 



CAD/CAM systems (computer aided
design/computer aided manufacturing) has been used in dentistry since 1985. In
the past 30 years, development of various high quality chairside and laboratory
CAD/CAM systems has been continued with the progress of technology. Especially
the improvements of CAD/CAM systems lets the practitioners choose different
restorative materials than the conventional ones, place chairside restorations
and also descrease the laboratory procedures. This article describes currently
used CAD/CAM systems and materials.



Key words: CAD/CAM, materials, systems

Keywords

CAD/CAM materyaller

References

  • 1. Karaalioğlu OF, Duymuş ZY, Diş hekimliğinde uygulanan CAD/CAM sistemleri, Atatürk Üniv Diş Hek Fak Derg. 2008; 18: 25-32.
  • 2. Strub JR, Rekow ED, Witkowski S, Computer-aided design and fabrication of dental restorations: Current systems and future possibilities, J Am Dent Assoc. 2006; 137: 1289- 96.
  • 3. Giordano R, Materials for chairside CAD/CAM-produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
  • 4. Fasbinder DJ, Clinical performance of chairside CAD/CAM restorations, J Am Dent Assoc. 2006; 137: 225-315.
  • 5. Raigrodski AJ, Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literatüre, J Prosthet Dent. 2004 Dec; 92: 557-62.
  • 6. Sjögren G, Molin M, van Dijken JWV, A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite, Int J Prosthodont. 2004; 17: 241-6.
  • 7. Denissen HW, van der Zel JM, van Waas MAJ, Measurement of the margins of partial-coverage tooth preparations for CAD/CAM, Int J Prosthodont. 1999; 12: 395-400.
  • 8. Williams RJ, Bibb R, Rafik T, A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying, J Prosthet Dent. 2004; 91: 85-8.
  • 9. Marchack CB, CAD/CAM-guided implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient, J Prosthet Dent. 2007; 97: 389- 94.
  • 10. Williams RJ, Bibb R, Eggbeer D, Collis J, Use of CAD/ CAM technology to fabricate a removable partial denture framework, J Prosthet Dent. 2006; 96: 96-9.
  • 21. Duret D, Preston JD, CAD/CAM imaging in dentistry, Curr Opinion Dent. 1991; 1: 150–154.
  • 22. Feuerstein P, Can technology help dentists deliver better patient care?, J Am Dent Assoc. 2004; 135; 11-6.
  • 23. Christensen GJ, Computerized restorative dentistry: State of the art, J Am Dent Assoc. 2001; 132: 1301- 3.
  • 24. Giordano R, Materials for Chairside CAD/CAM produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
  • 25. Liu PR, Essig ME, A panorama of dental CAD/CAM restorative systems, Compend Contin Educ Dent. 2008; 29: 482-93.
  • 26. Rosentiel SF, Land MF, Fujimoto J, Contemporary fixed prosthodontics, The C. V. Mosby Company. 2001: 643-72.
  • 27. Çelik G, Computer aided dentstry and current CAD/CAM systems, Cumhuriyet Dent J. 2013; 16: 74-82.
  • 28. Miyazaki T, Hotta Y, Kunii J, 
Kuriyama S, Tamaki Y, A review of dental CAD/CAM: current status and future perspectives from 20 years of experience, Dent Mater J. 2009; 28: 44-56.
  • 29. Andersson M, Ogden A, A new all- ceramic crown: a densely sintered, high purity alumina coping with porcelain, Acta Odontol Scand. 1993; 51: 59-64.
  • 30. Conrad HJ, Seong WJ, Pesun IJ, Current ceramic materials and systems with clinical recommendations: a systematic review, J Prosthet Dent. 2007; 98: 389-404
  • 41. Kelly JR, Nishimura I, Campbell SD, Ceramics in dentistry: historical roots and current perspectives, J Prosthet Dent. 1996; 75: 18-32.
  • 42. Giordano RA, Dental ceramic restorative systems, Compend Contin Educ Dent. 1996; 17: 779-82.
  • 43. Albakry M, Guazzato M, Swain MV, Biaxial flexural strenghth and microstructure changes of two recycled pressable glass ceramics, J Prosthodont. 2004; 13: 141-9.
  • 44. Tinschert J, Zwez D, Marx R, Anusavice KJ, Structural reliability of alümina-feldspar-leucite-mica and zirconia-based ceramics, J Dent. 2000; 28: 529-35.
  • 45. Fasbinder DJ, Restorative material options for CAD/CAM restorations, Compend Contin Educ Dent. 2002; 23: 911-916, 918-20.
  • 46. Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N, The affect of a layer of resin luting agent on the biaxial flexural strenght of two all-ceramic systems, J Prosthet Dent. 2005; 93: 459-66.
  • 47. Rosenstiel SF, Land MF, Fujımato J, Contemporary fixed prosthodontics, 4th ed, St Louis: Mosby Elsevier;2006.
  • 48. Ritzberger C, Apel E, Höland W, Perschke A, Rheinberger VM, Properties and clinical application of three types of dental glass-ceramics and ceramics for CAD/CAM Technologies, Metarials. 2010; 33: 700-13.
  • 49. Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP, Monolithic CAD/CAM lihium disilicate versus veneered YTZ-P crowns: comparison of failure modes and reliability after fatigue, Int J Prosthodont. 2010; 23: 434-42.
  • 50. Taskonak B, Mecholsky JJ Jr, Anusavice KJ, Residual stress in bilayer dental seramics, Biomaterials. 2005; 26: 3235-41
  • 60. Raigrodski AJ, Contemporary all ceramic fixed partial dentures:a review, Dent Clin North Am. 2004; 48: 531-44.
  • 61. Güth JF, Zuch T, Zwinge S, Engels J, Stimmelmayr M, Edelhoff D, Optical properties of manually and CAD/CAM-fabricated polymers, Dent Mater J. 2013; 32: 865-71.
  • 62. Höland W, Schweiger M, Frank M, Rheinberger V, A comparison of the microstructure and properties of the IPS Empress glass ceramics, J Biomed Mater Res. 2000; 53: 297-303.
  • 63. Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al, Mechanical properties of composite resin blocks for CAD/CAM, Dent Mater J. 2014; 33: 705-10.
  • 64. Mehl C, Harder S, Byrne A, Kern M, Prosthodontics in digital times: a case report, Quintessence Int. 2013; 44: 29-36.
  • 65. Zimmermann M, Mehl A, Reich S, New CAD/CAM materials and blocks for chairside procedures, Int J Comp Dent. 2013; 16: 173-81.

Year 2016, Volume: 26 Issue: 3, 524 - 533, 01.12.2016

Merve Tokgöz Çetindağ Ayşef Meşe

https://doi.org/10.17567/ataunidfd.290443

Abstract

References

  • 1. Karaalioğlu OF, Duymuş ZY, Diş hekimliğinde uygulanan CAD/CAM sistemleri, Atatürk Üniv Diş Hek Fak Derg. 2008; 18: 25-32.
  • 2. Strub JR, Rekow ED, Witkowski S, Computer-aided design and fabrication of dental restorations: Current systems and future possibilities, J Am Dent Assoc. 2006; 137: 1289- 96.
  • 3. Giordano R, Materials for chairside CAD/CAM-produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
  • 4. Fasbinder DJ, Clinical performance of chairside CAD/CAM restorations, J Am Dent Assoc. 2006; 137: 225-315.
  • 5. Raigrodski AJ, Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literatüre, J Prosthet Dent. 2004 Dec; 92: 557-62.
  • 6. Sjögren G, Molin M, van Dijken JWV, A 10-year prospective evaluation of CAD/CAM-manufactured (Cerec) ceramic inlays cemented with a chemically cured or dual-cured resin composite, Int J Prosthodont. 2004; 17: 241-6.
  • 7. Denissen HW, van der Zel JM, van Waas MAJ, Measurement of the margins of partial-coverage tooth preparations for CAD/CAM, Int J Prosthodont. 1999; 12: 395-400.
  • 8. Williams RJ, Bibb R, Rafik T, A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying, J Prosthet Dent. 2004; 91: 85-8.
  • 9. Marchack CB, CAD/CAM-guided implant surgery and fabrication of an immediately loaded prosthesis for a partially edentulous patient, J Prosthet Dent. 2007; 97: 389- 94.
  • 10. Williams RJ, Bibb R, Eggbeer D, Collis J, Use of CAD/ CAM technology to fabricate a removable partial denture framework, J Prosthet Dent. 2006; 96: 96-9.
  • 21. Duret D, Preston JD, CAD/CAM imaging in dentistry, Curr Opinion Dent. 1991; 1: 150–154.
  • 22. Feuerstein P, Can technology help dentists deliver better patient care?, J Am Dent Assoc. 2004; 135; 11-6.
  • 23. Christensen GJ, Computerized restorative dentistry: State of the art, J Am Dent Assoc. 2001; 132: 1301- 3.
  • 24. Giordano R, Materials for Chairside CAD/CAM produced restorations, J Am Dent Assoc. 2006; 137: 14-21.
  • 25. Liu PR, Essig ME, A panorama of dental CAD/CAM restorative systems, Compend Contin Educ Dent. 2008; 29: 482-93.
  • 26. Rosentiel SF, Land MF, Fujimoto J, Contemporary fixed prosthodontics, The C. V. Mosby Company. 2001: 643-72.
  • 27. Çelik G, Computer aided dentstry and current CAD/CAM systems, Cumhuriyet Dent J. 2013; 16: 74-82.
  • 28. Miyazaki T, Hotta Y, Kunii J, 
Kuriyama S, Tamaki Y, A review of dental CAD/CAM: current status and future perspectives from 20 years of experience, Dent Mater J. 2009; 28: 44-56.
  • 29. Andersson M, Ogden A, A new all- ceramic crown: a densely sintered, high purity alumina coping with porcelain, Acta Odontol Scand. 1993; 51: 59-64.
  • 30. Conrad HJ, Seong WJ, Pesun IJ, Current ceramic materials and systems with clinical recommendations: a systematic review, J Prosthet Dent. 2007; 98: 389-404
  • 41. Kelly JR, Nishimura I, Campbell SD, Ceramics in dentistry: historical roots and current perspectives, J Prosthet Dent. 1996; 75: 18-32.
  • 42. Giordano RA, Dental ceramic restorative systems, Compend Contin Educ Dent. 1996; 17: 779-82.
  • 43. Albakry M, Guazzato M, Swain MV, Biaxial flexural strenghth and microstructure changes of two recycled pressable glass ceramics, J Prosthodont. 2004; 13: 141-9.
  • 44. Tinschert J, Zwez D, Marx R, Anusavice KJ, Structural reliability of alümina-feldspar-leucite-mica and zirconia-based ceramics, J Dent. 2000; 28: 529-35.
  • 45. Fasbinder DJ, Restorative material options for CAD/CAM restorations, Compend Contin Educ Dent. 2002; 23: 911-916, 918-20.
  • 46. Pagniano RP, Seghi RR, Rosenstiel SF, Wang R, Katsube N, The affect of a layer of resin luting agent on the biaxial flexural strenght of two all-ceramic systems, J Prosthet Dent. 2005; 93: 459-66.
  • 47. Rosenstiel SF, Land MF, Fujımato J, Contemporary fixed prosthodontics, 4th ed, St Louis: Mosby Elsevier;2006.
  • 48. Ritzberger C, Apel E, Höland W, Perschke A, Rheinberger VM, Properties and clinical application of three types of dental glass-ceramics and ceramics for CAD/CAM Technologies, Metarials. 2010; 33: 700-13.
  • 49. Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP, Monolithic CAD/CAM lihium disilicate versus veneered YTZ-P crowns: comparison of failure modes and reliability after fatigue, Int J Prosthodont. 2010; 23: 434-42.
  • 50. Taskonak B, Mecholsky JJ Jr, Anusavice KJ, Residual stress in bilayer dental seramics, Biomaterials. 2005; 26: 3235-41
  • 60. Raigrodski AJ, Contemporary all ceramic fixed partial dentures:a review, Dent Clin North Am. 2004; 48: 531-44.
  • 61. Güth JF, Zuch T, Zwinge S, Engels J, Stimmelmayr M, Edelhoff D, Optical properties of manually and CAD/CAM-fabricated polymers, Dent Mater J. 2013; 32: 865-71.
  • 62. Höland W, Schweiger M, Frank M, Rheinberger V, A comparison of the microstructure and properties of the IPS Empress glass ceramics, J Biomed Mater Res. 2000; 53: 297-303.
  • 63. Lauvahutanon S, Takahashi H, Shiozawa M, Iwasaki N, Asakawa Y, Oki M, et al, Mechanical properties of composite resin blocks for CAD/CAM, Dent Mater J. 2014; 33: 705-10.
  • 64. Mehl C, Harder S, Byrne A, Kern M, Prosthodontics in digital times: a case report, Quintessence Int. 2013; 44: 29-36.
  • 65. Zimmermann M, Mehl A, Reich S, New CAD/CAM materials and blocks for chairside procedures, Int J Comp Dent. 2013; 16: 173-81.
There are 36 citations in total.

Details

Journal Section Articles
Authors

Merve Tokgöz Çetindağ This is me

Ayşef Meşe This is me

Publication Date December 1, 2016
Published in Issue Year 2016 Volume: 26 Issue: 3

Cite

APA Tokgöz Çetindağ, M., & Meşe, A. (2016). DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 26(3), 524-533. https://doi.org/10.17567/ataunidfd.290443
AMA Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Ata Diş Hek Fak Derg. December 2016;26(3):524-533. doi:10.17567/ataunidfd.290443
Chicago Tokgöz Çetindağ, Merve, and Ayşef Meşe. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26, no. 3 (December 2016): 524-33. https://doi.org/10.17567/ataunidfd.290443.
EndNote Tokgöz Çetindağ M, Meşe A (December 1, 2016) DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26 3 524–533.
IEEE M. Tokgöz Çetindağ and A. Meşe, “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”, Ata Diş Hek Fak Derg, vol. 26, no. 3, pp. 524–533, 2016, doi: 10.17567/ataunidfd.290443.
ISNAD Tokgöz Çetindağ, Merve - Meşe, Ayşef. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 26/3 (December 2016), 524-533. https://doi.org/10.17567/ataunidfd.290443.
JAMA Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Ata Diş Hek Fak Derg. 2016;26:524–533.
MLA Tokgöz Çetindağ, Merve and Ayşef Meşe. “DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, vol. 26, no. 3, 2016, pp. 524-33, doi:10.17567/ataunidfd.290443.
Vancouver Tokgöz Çetindağ M, Meşe A. DİŞ HEKİMLİĞİNDE KULLANILAN CAD/CAM (BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM) SİSTEMLERİ VE MATERYALLER. Ata Diş Hek Fak Derg. 2016;26(3):524-33.

Bu eser Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır. Tıklayınız.