DENTAL SERAMİKLERİN DAYANIKLILIKLARININ DEĞERLENDİRİLMESİNDE KULLANILAN BÜKÜLME DAYANIMI TESTLERİ

Year 2018, Volume: 28 Issue: 4, 625 - 628, 14.10.2018

Zeynep Yeşil Duymuş Alper Özdoğan

https://doi.org/10.17567/ataunidfd.474169

Abstract

Diş
hekimliğinde kullanılan restoratif materyallerin klinik başarısı hakkında
materyale uygulanan labora- tuvar testleri ile ön bilgilere ulaşılabilmektedir.
Pratik uygulamalarda kullanılan çok sayıda laboratuvar test- leri
bulunmaktadır. Materyallerin dayanıklılığının tespi- tinde kullanılan bükülme
dayanımı testleri de bu test- lerden biridir. Bu derlemede, dental seramiklerin
daya- nıklılıklarının değerlendirilmesinde kullanılan bükülme dayanımı testleri
anlatılmıştır.

Anahtar Kelimeler: Bükülme dayanımı testleri, dental seramikler, diş hekimliği

FLEXURAL STRENGTH
TESTS THAT ARE USED IN EVALUATION OF DENTAL CERAMIC STRENGTH

ABSTRACT

Preliminary information about the clinical success of
dental restorative materials can be determined by different laboratory tests.
There are many laboratory tests, which are used in practices. The flexural
strength test, which is used for determining the strength of materials, is one
of these tests. In this review, the flexural strength tests, which are used in
evaluation of dental ceramics’ strength, were described.

Keywords: Dental ceramics, dentistry, flexural strength tests.

Keywords

Bükülme dayanımı testleri, dental seramikler

References

• 1. Pittayachawan P. Comparative study of physical properties of zirconia based dental ceramics, Eastman Dental Institute Division of Biomaterials and Tissue Engineering University College, London. 2008. p.59-67.
• 2. Craig RG. Restorative Dental Materials 8. Ed. Mosby, St Louis. 1989. p.89-90.
• 3. Çalıkkocaoğlu S. Diş Hekimliğinde Maddeler Bilgisi (Metal Olmayan Maddeler). Yeditepe Üniv Diş Hek Fak 2000; 3: 96.
• 4. Anusavice KJ. Dental Ceramics. In: Phillips' Science of Dental Materials Saunders: 2003:655-719.
• 5. Sunnegardh-Gronberg K, Peutzfeldt A, van Dijken JW. Flexural strength and modulus of a novel ceramic restorative cement intended for posterior restorations as determined by a three-point bending test. Acta Odontol Scand 2003; 61: 87-92.
• 6. Bayındır F, Yılmaz CB. Comparison of diametral tensile, flexural, and compressive strengths of five core build-up materials. Atatürk Üniv Diş Hek Fak Derg 2007;17:18-23.
• 7. International Organization for Standardization. ISO 6872:1995, Dental ceramic. Geneva: ISO. 1995.
• 8. Ersu B, Yenigül M, Tulunoğlu I. Three point bending strength of In-ceram Core Material Sinterized with colloidal Alümina. H Ü Diş Hek Fak Derg 2007; 31:71-8.
• 9. Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials. Int J Prosthodont 1995; 8: 239-46.
• 10. Miller A, Long J, Miller B, Cole J. Comparison of the fracture strengths of ceramometal crowns versus several all-ceramic crowns. J Prosthet Dent 1992; 68: 38-41.
• 11. Magne P, Belser U. Esthetic improvements and in vitro testing of In-Ceram Alumina and Spinell ceramic. Int J Prosthodont 1997; 10: 459-66.
• 12. Cattell MJ, Clarke RL, Lynch EJ. The transverse strength, reliability and microstructural features of four dental ceramics-Part I. J Dent 1997; 25: 399-407.
• 13. Della Bona A, Anusavice KJ, Mecholsky JJ. Failure analysis of resin composite bonded to ceramic, Dent Mater 2003; 19:693-700.
• 14. Yilmaz H, Aydin C, Gul BE. Flexural strength and fracture toughness of dental core ceramics. J Prosthet Dent 2007; 98: 120-8.
• 15. Kelly JR. Perspectives on strength. Dent Mater 1995; 11: 103-10.
• 16. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. J Dent Res 1990; 69: 1791-9.
• 17. Morrell R, McCormick NJ, Bevan J, Lodeiro M, Margetson J. Biaxial disc flexure-Modulus and strength testing, Br Ceram Trans 1999; 98:234 -40.
• 18. Seal A, Dalui AK, Banerjee M, Mukhopadhyay AK, Phani KK. Mechanical properties of very thin cover slip glass disk, B Mater Sci 2001; 24:151-5.
• 19. Fett T, Rizzi G. 3-balls-on-3-balls test on ceramic disks: a finite element study, Forschugszentrum Kalsruhe: No. FZKA 7052, Karlsruhe. 2004.
• 20. Isgro G, Pallav P, Van der Zel J, Feilzer AJ. The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic, J Prosthet Dent 2003; 90:465-73.
• 21. Cattell MJ, Clarke RL, Lynch E. The biaxial flexural strength and reliability of four dental ceramics--Part II. J Dent 1997; 25: 409-14.
• 22. Lawn BR. Ceramic-based layer structures for bimechanical applications. Curr Opin Solid St M 2002; 6: 229-35.