Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys

M. Dikici

doi:10.1501/commua1-2_0000000063

EN

Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys

Abstract

Although double-shear theories of martensite crystallography vere considered more suc- cessful than the classical theories, stili it is not possibîe to explain the complete nature of the trans- formations especially in Fe alloys with ^225}f and {259}^ habit planes. Since the double-shear theories give better results than the classical theories and more than two simple shear elements were observed by electron microscope observations in these transformations, it is concluded that the number of the simple shears used in these theories should be increased. The triple-shear model which was based on the above mentioned results was found to be in good agreement with the ob servations in some Fe alloys with ^225jf habits. The same model was also applied to the Fe-Ni-C alloys with {259jf habits and gave succesful results.

Keywords

References

Communications, Series A2-A3: Physical Sciences and Engineering

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

M. Dikici This is me
Türkiye

Publication Date

January 1, 1987

Submission Date

January 1, 1987

Acceptance Date

-

Published in Issue

Year 1987 Volume: 36

DOI

https://doi.org/10.1501/commua1-2_0000000063

IZ

https://izlik.org/JA37LC75DA

Cite

RIS / Bibtex

APA

Dikici, M. (1987). Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering, 36. https://doi.org/10.1501/commua1-2_0000000063

AMA

1.Dikici M. Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys. Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng. 1987;36. doi:10.1501/commua1-2_0000000063

Chicago

Dikici, M. 1987. “Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys”. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering 36 (January). https://doi.org/10.1501/commua1-2_0000000063.

EndNote

Dikici M (January 1, 1987) Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering 36

IEEE

[1]M. Dikici, “Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys”, Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng., vol. 36, Jan. 1987, doi: 10.1501/commua1-2_0000000063.

ISNAD

Dikici, M. “Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys”. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering 36 (January 1, 1987). https://doi.org/10.1501/commua1-2_0000000063.

JAMA

1.Dikici M. Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys. Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng. 1987;36. doi:10.1501/commua1-2_0000000063.

MLA

Dikici, M. “Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys”. Communications Faculty of Sciences University of Ankara Series A2-A3 Physical Sciences and Engineering, vol. 36, Jan. 1987, doi:10.1501/commua1-2_0000000063.

Vancouver

1.M. Dikici. Application Of Triple-Shear Model To Martensitic Transformations In Fe-Ni-C Alloys. Commun.Fac.Sci.Univ.Ank.Series A2-A3: Phys.Sci. and Eng. 1987 Jan. 1;36. doi:10.1501/commua1-2_0000000063