Research Article

Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot

Volume: 6 Number: 4 October 28, 2018
EN

Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot

Abstract

In this study, real-time trajectory tracking control of an autonomous mobile robot, actuated by two DC motors, has been designed, analyzed and studied. Two different control approaches such as model based sliding mode (SMC) and the classical proportional–integral–derivative (PID) control are employed to increase the tracking performance of the mobile robot. A model based SMC technique has been presented in order to consider the complete dynamic model of the robot and in order to increase trajectory tracking performance of the system. The experimental outcomes strongly verified that the proposed controller gives a quite well trajectory tracking response and smaller magnitude overshot compared with the classical PID controller.

Keywords

References

  1. Referans1 N. Uchiyama, T. Hashimoto, S. Sano and S. Takagi, "Model-Reference Control Approach to Obstacle Avoidance for a Human-Operated Mobile Robot," in IEEE Transactions on Industrial Electronics, vol. 56, no. 10, pp. 3892-3896, Oct. 2009.
  2. Referans 2 M. Makarov, M. Grossard, P. Rodríguez-Ayerbe and D. Dumur, "Modeling and Preview$H_\infty$Control Design for Motion Control of Elastic-Joint Robots With Uncertainties," in IEEE Transactions on Industrial Electronics, vol. 63, no. 10, pp. 6429-6438, Oct. 2016.
  3. Referans 3 S. Li, Y. Zhang and L. Jin, "Kinematic Control of Redundant Manipulators Using Neural Networks," in IEEE Transactions on Neural Networks and Learning Systems, vol. 28, no. 10, pp. 2243-2254, Oct. 2017.
  4. Referans 4 Y. Zhang, S. Chen, S. Li and Z. Zhang, "Adaptive Projection Neural Network for Kinematic Control of Redundant Manipulators With Unknown Physical Parameters," in IEEE Transactions on Industrial Electronics, vol. 65, no. 6, pp. 4909-4920, June 2018.
  5. Referans 5 Z. Hou, A. Zou, L. Cheng and M. Tan, "Adaptive Control of an Electrically Driven Nonholonomic Mobile Robot via Backstepping and Fuzzy Approach," in IEEE Transactions on Control Systems Technology, vol. 17, no. 4, pp. 803-815, July 2009.
  6. Referans 6 D. Chwa, "Fuzzy Adaptive Tracking Control of Wheeled Mobile Robots With State-Dependent Kinematic and Dynamic Disturbances," in IEEE Transactions on Fuzzy Systems, vol. 20, no. 3, pp. 587-593, June 2012.
  7. Referans 7 A. Rojas-Moreno and G. Perez-Valenzuela, "Fractional order tracking control of a wheeled mobile robot," 2017 IEEE XXIV International Conference on Electronics, Electrical Engineering and Computing (INTERCON), Cusco, 2017, pp. 1-4.
  8. Referans 8 Y. Zhao, N. Chen and Y. Tai, "Trajectory tracking control of wheeled mobile robot based on fractional order backstepping," 2016 Chinese Control and Decision Conference (CCDC), Yinchuan, 2016, pp. 6730-6734.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

Mehmet Rasim Yıldırım This is me
Türkiye

Publication Date

October 28, 2018

Submission Date

September 13, 2018

Acceptance Date

October 28, 2018

Published in Issue

Year 2018 Volume: 6 Number: 4

APA
Dumlu, A., & Yıldırım, M. R. (2018). Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot. Balkan Journal of Electrical and Computer Engineering, 6(4), 211-216. https://doi.org/10.17694/bajece.459568
AMA
1.Dumlu A, Yıldırım MR. Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot. Balkan Journal of Electrical and Computer Engineering. 2018;6(4):211-216. doi:10.17694/bajece.459568
Chicago
Dumlu, Ahmet, and Mehmet Rasim Yıldırım. 2018. “Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot”. Balkan Journal of Electrical and Computer Engineering 6 (4): 211-16. https://doi.org/10.17694/bajece.459568.
EndNote
Dumlu A, Yıldırım MR (October 1, 2018) Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot. Balkan Journal of Electrical and Computer Engineering 6 4 211–216.
IEEE
[1]A. Dumlu and M. R. Yıldırım, “Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot”, Balkan Journal of Electrical and Computer Engineering, vol. 6, no. 4, pp. 211–216, Oct. 2018, doi: 10.17694/bajece.459568.
ISNAD
Dumlu, Ahmet - Yıldırım, Mehmet Rasim. “Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot”. Balkan Journal of Electrical and Computer Engineering 6/4 (October 1, 2018): 211-216. https://doi.org/10.17694/bajece.459568.
JAMA
1.Dumlu A, Yıldırım MR. Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot. Balkan Journal of Electrical and Computer Engineering. 2018;6:211–216.
MLA
Dumlu, Ahmet, and Mehmet Rasim Yıldırım. “Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot”. Balkan Journal of Electrical and Computer Engineering, vol. 6, no. 4, Oct. 2018, pp. 211-6, doi:10.17694/bajece.459568.
Vancouver
1.Ahmet Dumlu, Mehmet Rasim Yıldırım. Real-Time Implementation of Continuous Model Based Sliding Mode Control Technique for Trajectory Tracking Control of Mobile Robot. Balkan Journal of Electrical and Computer Engineering. 2018 Oct. 1;6(4):211-6. doi:10.17694/bajece.459568

Cited By

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı