Research Article
BibTex RIS Cite

Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]

Year 2021, Volume: 23 Issue: 3, 1055 - 1055, 15.12.2021
https://doi.org/10.24011/barofd.1036926

Abstract

*The authors regret there was an error in the author line related to a forgotten author and the corrected author Line is provided below.

Saadettin Murat ONAT1,*, Rafaat M. Hussein2
1Bartın Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümü, 74100, BARTIN
2SUNY, College of Environmental Science and Forestry, Syracuse, USA.

*There was an error in the letters in the Acknowledgements and the corrected author Line is provided below.

Acknowledgments
This paper is prepared from the Master’s thesis submitted to SUNY- ESF, Syracuse USA in 1999.
These changes would not affect the results and conclusion of the whole manuscript. The authors would like to apologize for any inconvenience caused.

Supporting Institution

This paper is prepared from the Master’s thesis submitted to SUNY- ESF, Syracuse USA in 1999.

References

  • All references and citations can be found in the published Version in : Please look at the details to the given address below: Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]

Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]

Year 2021, Volume: 23 Issue: 3, 1055 - 1055, 15.12.2021
https://doi.org/10.24011/barofd.1036926

Abstract

*The authors regret there was an error in the author line related to a forgotten author and the corrected author Line is provided below.

Saadettin Murat ONAT1,*, Rafaat M. Hussein2
1Bartın Üniversitesi, Orman Fakültesi, Orman Endüstri Mühendisliği Bölümü, 74100, BARTIN
2SUNY, College of Environmental Science and Forestry, Syracuse, USA.

*There was an error in the letters in the Acknowledgements and the corrected author Line is provided below.

Acknowledgments
This paper is prepared from the Master’s thesis submitted to SUNY- ESF, Syracuse USA in 1999.
These changes would not affect the results and conclusion of the whole manuscript. The authors would like to apologize for any inconvenience caused.

References

  • All references and citations can be found in the published Version in : Please look at the details to the given address below: Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]
There are 1 citations in total.

Details

Primary Language English
Subjects Timber, Pulp and Paper
Journal Section Corrections, Errata and Corrigenda
Authors

Saadettin Murat Onat This is me

Rafaat M. Hussein This is me

Publication Date December 15, 2021
Published in Issue Year 2021 Volume: 23 Issue: 3

Cite

APA Onat, S. M., & Hussein, R. M. (2021). Corrigendum to “feasibility of Using Metal Plate Connected Timber Strand LSL Joints in the Truss Fabrication Industry” [Bartın Orman Fakültesi Dergisi, 2016, 18 (1): 1 - 12]. Bartın Orman Fakültesi Dergisi, 23(3), 1055-1055. https://doi.org/10.24011/barofd.1036926


Bartin Orman Fakultesi Dergisi Editorship,

Bartin University, Faculty of Forestry, Dean Floor No:106, Agdaci District, 74100 Bartin-Turkey.

Fax: +90 (378) 223 5077, Fax: +90 (378) 223 5062,

E-mail: bofdergi@gmail.com