Karaçam (Pinus nigra Arnold.) Plantasyon Alanlarında Motorlu Testere İle Kesimde Zaman Tüketimi, Verimlilik ve Maliyet Analizi

Year 2024, Volume: 26 Issue: 3, 196 - 210, 15.08.2024

Tolga Öztürk , Batın Mehmet Yer , Muhittin İnan

https://doi.org/10.24011/barofd.1458703

Abstract

Ülkemizde artan nüfus sayısına göre odun hammaddesi ihtiyacı da artış göstermektedir. Oluşan bu talep ve artış nedeniyle odun hammaddesinin kesim süreci verim, maliyet, iş güvenliği ve çevresel zararlar açısından önemli bir hal almıştır. Bu çalışmanın amacı, İstanbul Sarıyer bölgesinde yer alan karaçam (Pinus nigra Arnold.) plantasyonlarında Husqvarna 365 motorlu testere ile yapılan kesim, dal alma, ölçme ve boylama çalışmalarında zaman tüketimi, verimlilik ve maliyeti tespit etmektir. Bu amaçla motorlu testere ile yapılan çalışmalarda zaman etütleri yapılmıştır. Bu zaman etütleri sonucunda ortalama 12.62 m boyunda ve 21.41 cm göğüs yüksekliği çapına sahip karaçam meşcerelerinde kesme verimi 2.825 m3/sa olarak bulunmuştur. Zaman etütleri sonucunda bir ağacın ortalama kesim süreci 5.31dakika/sefer olarak belirlenmiştir. Bunun yanında, yapılan çalışmada motorlu testere ile kesim çalışmasının maliyeti 5.53 $/sa ve 1.96 $/m3 olarak belirlenmiştir. Ayrıca, motorlu testerenin yakıt tüketimi 1.85 lt/sa olarak hesaplanmıştır. Çalışmanın sonucunda, motorlu testere verimliliğinin ağaç çapı ve dal alma-boylama ile ilişkili olduğu bulunmuştur.

Keywords

Husqvarna, maliyet, odun üretimi, verimlilik, zaman ölçümleri

Thanks

Çalışmanın arazi çalışmalarının gerçekleştirilmesinde yardımcı olan Sezgin ARGUN ve Serdar GEYİKÇİ’ye teşekkür ederiz.

Time Consumption, Productivity and Cost Analysis of the Motor Manual Tree Felling in the Black Pine (Pinus nigra Arnold.) Plantation Areas

Abstract

The need for wood raw materials also increases with the increasing population in our country. Due to this demand and increase, the cutting process of wood raw material has become important in terms of efficiency, cost, occupational safety, and environmental damage. The aim of this study is to determine the time consumption, productivity, and cost of cutting, branching, measuring, and bucking works carried out with a Husqvarna 365 chainsaw in black pine (Pinus nigra Arnold.) plantations located in the Sarıyer region of Istanbul. For this purpose, time studies were carried out with a chainsaw. As a result of these time studies, the productivity of black pine stands with an average height of 13 m and a breast height diameter of 21 cm was found to be 2.825 m3/hour. Additionally, the average cutting process of a tree was found to be a total of 5.31 minutes per session. Furthermore, the cost of cutting with a chainsaw is $5.53 per hour and $1.96 per m3. In addition, the fuel consumption of chainsaw calculated as 1.85 L/hour. As a result, the study found that the efficiency was related to tree diameter and the amount of bucking.

Keywords

Husqvarna, cost, wood production, productivity, time measurements

References

• Acosta, F.C., Oliveira, C., Arruda, M.I., Garcia, R.R. (2018). Operational performance of the selective cutting of trees with chainsaw. Foresta e Ambiente, 25(3): 1-9. Erişim adresi: https://www.scielo.br/j/floram/a/KCJJ9ymJbDtbDJtPG79jxDx/abstract/?lang=en
• Balimunsi, H., Grigolata, S., Picchio, R., Nyombi, K., Cavalli, R., (2012). Productivity and energy ba-lance of forest plantation harvesting in Uganda. Forestry Studies in China, 14(4): 276-282. Erişim adre-si: https://www.researchgate.net/publication/234012766_Productivity_and_energy_balance_of_forest_plantation_harvesting_in_Uganda
• Barokah, S.M., Matangaran, J.R., Santosa, G., (2017). Cost analysis of felling with chainsaw and skid-ding with farm tractor in KPH Saradan. International Journal of Sciences:Basic and Applied Rese-arch, 33(1):89-102.Erişim adresi: https://gssrr.org/index.php/JournalOfBasicAndApplied/article/view/7205/3428
• Behjou, F. K., Majnounian, B., Dvořák, J., Namiranian, M., Saeed, A. ve Feghhi, J. (2009). Productivity and cost of manual felling with a chainsaw in Caspian forests. Journal of Forest Science, 55(2), 96-100. Erişim adresi: https://doi.org/10.17221/69/2008-jfs.
• Borz, S. A. ve Ciobanu, V. (2013). Efficiency of motor-manual felling and horse logging in small-scale firewood production. African Journal of Agricultural Research, 8 (24), 3126-3135. Erişim adresi: https://www.researchgate.net/profile/Stelian-Borz/publication/259182012.
• Bureau International des Poidset Mesures (2006). The International System of Units (SI). 8th edition. 97p. Calvo, A., Manzone, M., Spinelli, R., (2013). Long term repair and maintenance cost of some professional chainsaw. Croat. J. For. Eng., 34(2): 265-271. Erişim adresi: https://www.researchgate.net/publication/288453722_Long_Term_Repair_and_Maintenance_Cost_of_some_Professional_Chainsaws
• Çalışkan, E., Şentürk, N. ve Acar, H.H. (2006). Kesim sürecinde birim zaman tespiti üzerine bir araş-tırma. İstanbul Üniversitesi Orman Fakültesi Dergisi, A56(1): 159-167: Erişim adresi: https://atif.sobiad.com/index.jsp?modul=makale-detay&Alan=fen&Id=6UorengBu-adCBSEend
• Campu, V.R., ve Ciubotaru, A. (2017). Time consumption and productivity in manual tree felling with a chainsaw – a case study of resinous stands from mountainous areas. Silva Fennica, 51(2): 1-19. Erişim adresi: https://www.silvafennica.fi/article/1657
• Conway, S. (1982). Logging Practices. Principles of timber harvesting systems. Miller Freeman Publication. Inc. Washington. Erişim adresi: https://www.cabidigitallibrary.org/doi/full/10.5555/19770641812.
• Eker, M., Şefik, M., (2019). Motorlu tırpana montajlı kabuk soyma aracının (motosoyar) geliştirimesi ve denenmesi. Turkish Journal of Forestry, 20(4):411-420. Erişim adresi: https://dergipark.org.tr/tr/pub/tjf/issue/51103/609571
• Febo, P., Piptone, F., Peri, G. (1997). The preservation of Sicilian forests with poorly mechanized logging processes. J. Agric. Engng. Res., 67: 229-233. Erişim adresi: https://www.sciencedirect.com/science/article/abs/pii/S0021863497901645
• Hartsough, B.R., Zhang, X., Fight, R. (2001). Harvesting cost model for small trees in natural stands in the Interior Northwest. Journal of the Forest Products, 51(4): 54-61. Erişim adresi: https://www.fs.usda.gov/research/treesearch/24621
• Ghaffarian, M.R. ve Sobhani, H. (2007). Cost production study of motor-manually felling and proces-sing of logs. Forest Science, No.3: 69-76. Erişim adresi: https://www.semanticscholar.org/paper/Cost-production-study-of-motor-manually-felling-and-Ghaffarian-Sobhani/dc01409c118ccb70175abac0d4e669cea298ef0b
• Ghaffarian, M.R. (2021). Review of studies on motor-manual felling productivity in eucalypt stands. Silva Balcanica, 22(1): 77-87. Erişim adresi: https://silvabalcanica.pensoft.net/article/58750/
• Gülci, N., Akay, A.E., Erdaş, O. (2016). Investigation of timber harvesting operations using chainsaw considering productivity and residual stand damage: The case of Bahçe forest enterprise chief. Journal of The Faculty of Forestry Istanbul University, 66(2):357-368. Erişim adresi: https://forestist.org/en/investigation-of-timber-harvesting-operations-using-chainsaw-considering-productivity-and-residual-stand-damage-the-case-of-bahce-forest-enterprise-chief-13421
• Gülen, İ. (1959). Karaçam (Pinus nigra Arnold) hacim tablosu. Journal of the Faculty of Forestry Istanbul University, 9(1), 97-112. Erişim adresi: https://doi.org/10.17099/jffiu.58548.
• Ignea, G.H., Ghaffaryian,M.R., Borz, S.A. (2017). Impact of operational factors on fossil energy in-puts in motor –manual tree felling and processing: a results of two case studies. Annals of Fo-rest Research, 60(1): 161-172. Erişim adresi: https://www.afrjournal.org/index.php/afr/article/view/705/640
• Jourgholami, M, Majnounian, B., Zargham N. (2013). Performance, capability and costs of motor ma-nual tree felling in Hyrcanian hardwood forest. Croat. J. For. Eng., 34(2): 283-293. Erişim adresi: https://crojfe.com/site/assets/files/3963/jourgholami_283-293.pdf
• Jourgholami, M. ve Abari, M.E. (2017). Log damage and value loss following motor-manual tree har-vesting in the Hyrcanian forest, Northern Iran. Eur.J.Forest Eng. 3(1): 35-43. Erişim adresi: https://dergipark.org.tr/en/pub/ejfe/issue/30014/325110
• Kalaycı, Ş., 2006, SPSS Uygulamalı Çok Değişkenli İstatistik Teknikleri. Asil Yayın Dağıtım, Ankara, 975-9091-14-3. Kluender, R. A. ve Stokes, B. (1996). Felling and skidding productivity and harvesting cost in Souttiet pine forests In: CWF/IUFRO Conference, WSI 3423. Erişim adresi: https://www.srs.fs.usda.gov/pubs/ja/ja_kluender001.pdf
• Koutsianitis, D. ve Tsioras, P.A. (2017). Time consumption and production costs of two small-scale wood harvesting systems in northern Greece. Small-scale Forestry, 16: 19-35. Erişim adresi: https://link.springer.com/article/10.1007/s11842-016-9340-3
• Labelle, E.R., Bergen, M. Ve Windisch, J. (2017). The effect of quality bucking and automatic buc-king on harvesting productivity and product recovery in a pine-dominated stand. European Journal of Forest Research, 136(4): 639-652. Erişim adresi: https://link.springer.com/article/10.1007/s10342-017-1061-4
• Liepiņš, K., Lazdiņš, A., Liepiņš, J. ve Prindulis, U. (2015). Productivity and Cost-Effectiveness of Mechanized and Motor-Manual Harvesting of Grey Alder (Alnus incana (L.) Moench): A Case Study in Latvia. Small-Scale Forestry, 14(4), 493-506. https://doi.org/10.1007/s11842-015-9302-1.
• Lotfalian, M., Abbasi, E., Hosseini, S.A, 2016. Productivity and cost of tree bucking with a chainsaw in Caspian Forests. Biological Forum – An International Journal, 8(2): 16-21. Erişim adresi: https://www.researchgate.net/publication/287216005_Productivity_and_cost_of_manual_felling_with_a_chainsaw_in_Caspian_forests
• Magognotti, N., Spinelli, R., Acuna, M., Bigot, M., Guerra, S., Hartsough, B., Kanzian, C., Karha, K., Lindroos, O, Roux, S., Talbot, B., Tolosana, E., Zormaier, F. (2012). Good practice guideline for biomass production studies. COST Action FP-0902, WG 2 Operations research and measurement methodolies. Italy.
• Manavakun, N. (2014). Harvesting operations in eucalyptus plantations in Thailand. Dissertationes Forestales, 2014(177). Erişim adresi: https://doi.org/10.14214/df.177.
• Mousavi, R. (2009). Comparison of productivity, cost and environmental impacts of two harvesting methods in Northern Iran: short-log vs. long-log. Dissertationes Forestales, 82, 93. Erişim adresi: https://pdfs.semanticscholar.org/3d00/150e59576b1917bc93a064668e3bd0c4b726.pdf
• Mousavi, R., Nikouy, M. ve Uusitalo, J. (2011). Time consumption, productivity, and cost analysis of the motor manual tree felling and processing in the Hyrcanian Forest in Iran. Journal of Forestry Research, 22(4), 665-669. https://doi.org/10.1007/s11676-011-0208-2.
• Mujetahid, A., Gautama, I., Dayla, N., Atik, N.F. (2020). Using a types chainsaw efficiently. Earth and Environmental Sciences, 473, 012068: 1-9. Erişim adresi: https://iopscience.iop.org/article/10.1088/1755-1315/473/1/012068/pdf
• Nikooy, M. (2007). Production optimization and reduction impact on forest by preparing harvest planning in Nav, Iran. PhD, University of Tehran, Tehran.
• OGM, 2023. Sarıyer Orman İşletme Şefliği Amenajman Planı.
• Öztürk, T ve İnan, M. (2022). Odun üretim çalışmalarından sonra meşcerede kalan ağaçlardaki zararla-rın incelenmesi (Belgrad Ormanı örneği). Anadolu Orman Araştırma Dergisi, 8(2): 40-45. Erişim adresi: https://dergipark.org.tr/tr/pub/ajfr/issue/73964/1177652
• Peterson, J.T., 1987. Harvesting economics: Hand falling second-growth timber. Technical Research Note TN-98. Forest Engineering Research Institute of Canada, Vancouver, Canada.
• Popovici, R., (2013). Estimating chainsaw operating costs based on fuel, lubricants and spare parts. Bulletin of the Transilvania University of Braşov Series II, 6(55):63-68. Erişim adresi: https://www.researchgate.net/publication/286393079_Estimating_chainsaw_operating_costs_based_on_fuel_lubricants_and_spare_parts
• Samset I. (1990). Some observations on time and performance studies in forestry. Meddelelserfra Norsk Institutt for Skogforskning, 43(5). 80 p. Erişim adresi: https://hdl.handle.net/11250/2979624.
• Sarikhani, N., 2008: Forest utilization. Tehran University Press, Tehran. 728 p. (in Persian).
• Sobhani, H. (1984). A method data collection fort he evaluation of forest harvesting systems. PhD. Thesis, Virginia Tech University, USA.
• Tunay, M., Melemez, K. (2005). Motorlu testere ile yapılan üretim çalışmaları üzerine bir araştırma. İstanbul Üniversitesi Orman Fakültesi Dergisi, B55(2): 31-41: Erişim adresi: https://dergipark.org.tr/tr/pub/jffiu/issue/18712/197347
• Uotila, K., Saksa, T., Rantala, J. ve Kiljunen, N. (2014). Labour consumption models applied to motor-manual pre-commercial thinning in Finland. Silva Fennica, 48(2). https://doi.org/10.14214/sf.982.
• Wang, J., Long, C., McNeel, J. ve Baumgrass, J. (2004). Productivity and cost of manual felling and cable skidding in Central Appalachian hardwood forests. Forest Products Journal, 54(2): 45-51. Erişim adresi:https://www.fs.usda.gov/ne/newtown_square/publications/other_publishers/OCR/ne_2004_wang001.pdf
• Webster, A. (2013). Introductory regression analysis: with computer application for business and economics. Routledge, New York. Erişim adresi: https://www.researchgate.net/publication/331472205.
• Yıldırım, M., 1989. Ormancılık İş Bilgisi. İÜ Orman Fakültesi Yayın No: 404, İstanbul. URL-1. https://www.husqvarna.com/tr/motorlu-testereler/365/ (Erişim tarihi: 29.02.2024)