Design and Performance Investigation of a Series Compensated Inductive Wireless Power Transfer System for Supplying a Low Power DC Load

Year 2024, , 418 - 424, 29.06.2024

Mehmet Buyuk

https://doi.org/10.17798/bitlisfen.1414588

Abstract

In this study, a series compensated WPT system is presented for low power DC load applications. Series LC resonant circuits are applied for both transmitter and receiver sides of WPT system to reduce the impedance at a specified operation frequency, and thus, ensure low power losses. The operation frequency is chosen as 109 kHz for the series compensated WPT system. Then, the series resonant LC filter is designed according to the operation frequency and WPT rating values. In addition, the power electronics systems with their controller and operation principle are demonstrated in depth. To investigate the performance of the proposed system, a 100 W series compensated WPT model is designed and constructed in Matlab/Simulink enviroment. Different simulation results are provided to illustrate the performance of the proposed WPT model. The simulation results show the stable operation of the proposed system under the designed system parameters.

Keywords

Wireless power transfer, Series LC compensation, Low power application, Inductive WPT model.

References

• [1] Z. Bi, L. Song, R. De Kleine, C. Mi, and G. Keoleian, "Plug-in vs. wireless charging: Life cycle energy and greenhouse gas emissions for an electric bus system," Applied Energy, vol. 146, 05/15 2015.
• [2] P. Lazzeroni, V. Cirimele, and A. Canova, "Economic and environmental sustainability of Dynamic Wireless Power Transfer for electric vehicles supporting reduction of local air pollutant emissions," Renewable and Sustainable Energy Reviews, vol. 138, p. 110537, 2021/03/01/ 2021.
• [3] S. Chhawchharia, S. K. Sahoo, M. Balamurugan, S. Sukchai, and F. Yanine, "Investigation of wireless power transfer applications with a focus on renewable energy," Renewable and Sustainable Energy Reviews, vol. 91, pp. 888-902, 2018/08/01/ 2018.
• [4] T. Kan, T. Nguyen, J. Wjite, R. Malhan, and C. Mi, "A New Integration Method for an Electric Vehicle Wireless Charging System Using LCC Compensation Topology," IEEE Transactions on Power Electronics, vol. 32, pp. 1-1, 01/01 2016.
• [5] H. Pan, L. Qi, X. Zhang, Z. Zhang, W. Salman, Y. Yuan, et al., "A portable renewable solar energy-powered cooling system based on wireless power transfer for a vehicle cabin," Applied Energy, vol. 195, pp. 334-343, 2017/06/01/ 2017.
• [6] Y. H. Sohn, B. H. Choi, E. S. Lee, G. C. Lim, G. Cho, and C. T. Rim, "General Unified Analyses of Two-Capacitor Inductive Power Transfer Systems: Equivalence of Current-Source SS and SP Compensations," IEEE Transactions on Power Electronics, vol. 30, pp. 6030-6045, 2015.
• [7] Z. Zhang, H. Pang, A. Georgiadis, and C. Cecati, "Wireless Power Transfer—An Overview," IEEE Transactions on Industrial Electronics, vol. 66, pp. 1044-1058, 2019.
• [8] S. D. Barman, A. W. Reza, N. Kumar, M. E. Karim, and A. B. Munir, "Wireless powering by magnetic resonant coupling: Recent trends in wireless power transfer system and its applications," Renewable and Sustainable Energy Reviews, vol. 51, pp. 1525-1552, 2015/11/01/ 2015.
• [9] H. Wang, K. T. Chau, C. H. T. Lee, L. Cao, and W. Lam, "Design, Analysis and Implementation of Wireless Shaded-Pole Induction Motors," IEEE Transactions on Industrial Electronics, vol. PP, pp. 1-1, 07/10 2020.
• [10] Verified Market Research. Available: https://www.verifiedmarketresearch.com/product/wireless-power-transmission-market/
• [11] H. Wang, K. T. Chau, C. H. T. Lee, and C. Jiang, "Wireless Shaded-Pole Induction Motor With Half-Bridge Inverter and Dual-Frequency Resonant Network," IEEE Transactions on Power Electronics, vol. 36, pp. 13536-13545, 2021.
• [12] A. Berger, M. Agostinelli, S. Vesti, J. A. Oliver, J. A. Cobos, and M. Huemer, "A Wireless Charging System Applying Phase-Shift and Amplitude Control to Maximize Efficiency and Extractable Power," IEEE Transactions on Power Electronics, vol. 30, pp. 6338-6348, 2015.
• [13] M. Stanculescu, M. Iordache, D. Niculae, L. Bobaru, and V. Bucata, "Algorithm for Computing S Parameters and Their Use for Studying Efficiency of Electromagnetic Energy Wireless Transfer Systems," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 63, pp. 138-144, Apr-Jun 2018.
• [14] Y. Frechter and A. Kuperman, "Output Voltage Range of a Power-Loaded Series–Series Compensated Inductive Wireless Power Transfer Link Operating in Load-Independent Regime," IEEE Transactions on Power Electronics, vol. 35, pp. 6586-6593, 2020.
• [15] A. Kuperman, "Simple Enhancement of Series–Series-Compensated Inductive Wireless Power Transfer Links Operating With Load-Independent Voltage Output at Fixed Frequency to Attain Zero Inverter Phase Angle," IEEE Transactions on Power Electronics, vol. 38, pp. 5670-5674, 2023.
• [16] M. Zavrel, V. Kindl, M. Frivaldsky, D. Andriukaitis, and D. Navikas, Optimization of series-series compensated wireless power transfer system using alternative secondary side rectification, 2023.
• [17] K. R. S. Vadivu and R. Ramaprabha, "Improved Steady State and Large Signal Transient Response of Three Level AC-DC Converter Using Hysteresis Modulation based SMC Under DCM," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 66, pp. 85-90, Apr-Jun 2021.
• [18] S. Arezki and M. Boudour, "Study and Regulation of DC Bus Voltages of Wind-Photovoltaic System," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 59, pp. 35-46, Jan-Mar 2014.
• [19] S. Ann and B. Lee, "Analysis of Impedance Tuning Control and Synchronous Switching Technique for a Semi-Bridgeless Active Rectifier in Inductive Power Transfer Systems for Electric Vehicles," IEEE Transactions on Power Electronics, vol. 38, pp. 8786-8798, 2021.