TR
EN
INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14
Abstract
The aim of this study is investigating a new possibility instead of EN GJS 500-7 material. The new possibility is solution strenghted ductile iron EN GJS 500-14 with higher yield strength, higher elongation, low weight and low cost advantages. For the selected composition, whole mechanical and microstructural properties has been achieved. The thermal analyses and the computer simulation has been studied. Results showed good correlation between real casting results and computer simulation. Finally, EN GJS 500-14 casting material is replaceable for 500-7 in certain conditions; tensile, hardness, elongation and yield strength requirements.
Keywords
References
- Herfurth, K., Gorski, R., Beute, K., Hering, M. (2011). GOPAG C 500 F,Gontermann-Peipers, Germany.
- Larker R. Solution strengthened ferritic ductile iron ISO 1083/JS/500-10 provides superior consistent proper-ties in hydraulic rotators. Chin Foundry. 2009;6(4):343–351.
- Takuo Umetani, Hiroyoshi Takada, Tomohiro Ikeda, Tomiko Yamaguchi,Hidenori Era & Kazumasa Nishio (2015) Transformation process of weld heat-affected zone in solution-strengthened ferritic ductile cast iron, Welding International, 29:5, 342-348, DOI:10.1080/09507116.2014.921063.
- Wolfram Stets, Herbert Löblich, Gert Gassner, Peter Schumacher, Solution Strengthened Ferritic Ductile Cast Iron Properties, Production And Application, Interna-tional Journal of Metalcasting/Volume 8, Issue 2, 2014
- DIN EN 1563: 2012-03: Gusseisen mit Kugelgraphit (2012). (German Institute for Standardization Deutsches Institut fur Normung)
Details
Primary Language
English
Subjects
Material Production Technologies
Journal Section
Research Article
Publication Date
June 30, 2020
Submission Date
April 2, 2020
Acceptance Date
May 6, 2020
Published in Issue
Year 2020 Volume: 3 Number: 1
APA
Erturk, S. Ö., & Ozel, A. (2020). INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14. Bayburt Üniversitesi Fen Bilimleri Dergisi, 3(1), 41-45. https://izlik.org/JA79DW98DD
AMA
1.Erturk SÖ, Ozel A. INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14. Bayburt Üniversitesi Fen Bilimleri Dergisi. 2020;3(1):41-45. https://izlik.org/JA79DW98DD
Chicago
Erturk, Soner Özden, and Ahmet Ozel. 2020. “INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14”. Bayburt Üniversitesi Fen Bilimleri Dergisi 3 (1): 41-45. https://izlik.org/JA79DW98DD.
EndNote
Erturk SÖ, Ozel A (June 1, 2020) INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14. Bayburt Üniversitesi Fen Bilimleri Dergisi 3 1 41–45.
IEEE
[1]S. Ö. Erturk and A. Ozel, “INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14”, Bayburt Üniversitesi Fen Bilimleri Dergisi, vol. 3, no. 1, pp. 41–45, June 2020, [Online]. Available: https://izlik.org/JA79DW98DD
ISNAD
Erturk, Soner Özden - Ozel, Ahmet. “INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14”. Bayburt Üniversitesi Fen Bilimleri Dergisi 3/1 (June 1, 2020): 41-45. https://izlik.org/JA79DW98DD.
JAMA
1.Erturk SÖ, Ozel A. INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14. Bayburt Üniversitesi Fen Bilimleri Dergisi. 2020;3:41–45.
MLA
Erturk, Soner Özden, and Ahmet Ozel. “INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14”. Bayburt Üniversitesi Fen Bilimleri Dergisi, vol. 3, no. 1, June 2020, pp. 41-45, https://izlik.org/JA79DW98DD.
Vancouver
1.Soner Özden Erturk, Ahmet Ozel. INVESTIGATION ON THE PRODUCTION OF SOLUTION STRENGHTED DUCTILE IRON PART GRADE 500-14. Bayburt Üniversitesi Fen Bilimleri Dergisi [Internet]. 2020 Jun. 1;3(1):41-5. Available from: https://izlik.org/JA79DW98DD