Bu çalışmada birçok sektörde kullanım alanına sahip sfero döküm malzemesinin yüzeyi Termo reaktif çökelme/ difüzyon(TRD) yöntemi kullanılarak NbC ile kaplanmıştır. Kaplama işlemi sonrası yüzeyde oluşan kaplama kalınlığı optik mikroskop kullanılarak incelenmiştir.İnceleme sonrası kaplama yüzeylerinin sıcaklık ve süreye bağlı olarak arttığı tespit edilmiştir. En düşük kaplama kalınlığının 850 ℃ 2 saatlik numunede 1.571 μm olarak tespit edilirken, En yüksek kaplama değeri ise 900 ℃ sıcaklık ve 2 saatlik fırında kalma süresine sahip numunede ise 8.123 μm olarak tespit edilmiştir.
Özellikle 900 ve 2 saat fırında bekleme süresine sahip numunenin kaplama kalınlığında yüksek artış olduğu tespit edilmiştir. Kaplama kalınlığında süre ve sıcaklığın önemli bir etkisi olduğu söylenebilir.
In this study, the surface of ductile iron material, which is used in many sectors, was coated with NbC using the Thermo-reactive deposition/diffusion (TRD) method. The coating thickness formed on the surface after the coating process was examined using an optical microscope.
It has been determined that the coating surfaces increase depending on temperature and time.
While the lowest coating thickness was determined as 1.571 μm in the sample with a temperature of 850 ℃ and 2 hours of oven time, the
Primary Language | Turkish |
---|---|
Subjects | Plating Technology |
Journal Section | Makaleler |
Authors | |
Early Pub Date | December 26, 2023 |
Publication Date | December 31, 2023 |
Submission Date | November 28, 2023 |
Acceptance Date | December 6, 2023 |
Published in Issue | Year 2023 |