Toz Metalurjisi ile Üretilen 316L Östenitik Paslanmaz Çeliklerin Termofiziksel Özelliklerin Üzerindeki Basıncın Etkisi

Year 2020, Volume: 35 Issue: 1, 241 - 250, 31.03.2020

Ayşe Nur Acar Abdul Kadir Ekşi Ahmet Ekicibil

https://doi.org/10.21605/cukurovaummfd.764958

Abstract

Otomotiv gibi endüstriyel alanlarda kullanılan östenitik paslanmaz çelik yüksek fiziksel ve mekaniksel özelliklere sahiptir. Bu çalışmada benzer ya da benzere yakın şekilli ürün ve karmaşık şekilli malzeme üretilmesine olanak sağlanmasından dolayı araştırmacılar tarafından cazip görülen toz metalurjisi yöntemiyle hazırlanan 316L östenitik paslanmaz çeliğin termofiziksel özellikleri araştırılmıştır. Östenitik paslanmaz çelikler 400 ve 600 MPa basınçlarında preslenmiş ve preslenen östenitik paslanmaz çelik numuneler 1200 °C sıcaklığında 1 sa boyunca inert gaz atmosferinde sinterlenmiştir. Bu sinterlenmiş östenitik paslanmaz çeliklerin termofiziksel özellikleri oda sıcaklığından 600 °C’ye kadar olan sıcaklık aralığında ısı akısı tipli Diferansiyel Taramalı Kalorimetreyle (DSC) ile ölçülmüştür. Bu özellikler SEM görüntüleri, EDS spektrumları ve OM (optik mikroskop) görüntüleri ile desteklenmiştir.

Keywords

Özgül ısı kapasitesi, Entalpi, Östenitik paslanmaz çelik, Toz metalurjisi

Pressure Influence on the Thermophysical Properties of 316L Austenitic Stainless Steels Manufactured By Powder Metallurgy Method

Abstract

Austenitic stainless steel that is used in the industrial areas such as automotive has high physical and mechanical properties. In this study; thermophysical properties of 316L austenitic stainless steel prepared by powder metallurgy method that is attracted for researchers due to obtain net or near shaped product and complex shaped materials, have been investigated. Austenitic stainless steels pressed on the 400 and 600MPa pressures and pressed austenitic stainless steel samples sintered at 1200 °C temperature for an hour under inert gas atmosphere. The thermophysical features o these sintered austenitic stainless steel were performed at temperature ranging from RT to 600 °C via heat flux type Differential Scanning Calorimeter (DSC). These properties supported by SEM images, EDS spectrums and OM (Optic microscope) images.

Keywords

Specific heat capacity, Enthalpy, Austenitic stainless steel, Powder metallurgy

References

• 1. Morintale, E., Harabor, A., Constantinescu, C., Rotaru, P., 2015. Use of Heat Flows from DSC Curve for Calculaion of Specific Heat of the Solid Materials, Physics AUC. 23, 89-94.
• 2. Wielgosz, E., Kargul, T., Falkus, J., 2014.Comparison of Experimental and Numerically Calcuated Thermal Properties of Steels, International Conference on Metallurgy and Materials, Metal 2014, May 21st-23rd 2014, Brno, Czech Republic.
• 3. Fang, H., Wong, M.B., Bai, Y., 2015. Use of Kinetic Model for Thermal Properties of Steel at High Temperatures, Australian Journal of Civil Engineering, 13(1), 40-47.
• 4. Kelley, K.K., 1949. X. High-Temperature Heat-Content, Heat-Capacity, and Entropy Data for Inorganic Compounds, Bureau of Mines Bull. 476, 192.
• 5. Acar, A.N., Ekşi, A.K., Ekicibil, A., 2019. Effect of Pressure on the Magnetic and Structural Properties of X2CrNiMo17-12-2 Austenitic Stainless Steel Prepared by Powder Metallurgy Method Journal of Molecular Structure, 1198, 126876.
• 6. Acar, A.N., Mutlu, R.N., Ekşi, A.K., Ekicibil, A., Yazıcı, B., 2018. Effect of Temperature and Pressure on Mechanical, Surface and Electrochemical Properties of Al-1.5Cu-5.5Zn- 2.5Mg (Alumix-431), Anti-Corrosion Methods and Materials 65/6, 558–571.
• 7. Akhavan Tabatabae, B., Ashrafizadeh, F., Hassanlı, A.M., 2011. Influence of Retained Austenite on the Mechanical Properties of Low Carbon Martensitic Stainless Steel Castings, ISIJ International, 51(3), 471–475.
• 8. Azevedo, J.M.C., Serrenho, A.C., Allwood, J.M., 2018. Energy and Material Efficiency of Steel Powder Metallurgy, Powder Technology 328, 329–336.
• 9. Kulkarni, H., Dabhade, V.V., 2019. Green Machining of Powder-Metallurgy-Steels (PMS): An Overview, Journal of Manufacturing Processes 44, 1–18.
• 10. Butković, S., Oruč, M., Šarić, E., Mehmedović, M., 2012. Effect of Sintering Parameters on the Density, Microstructure and Mechanical Properties of the Niobium-Modified Heat- Resistant Stainless Steel GX40CrNiSi25-20 Produced by MIM Technology, Materiali in tehnologije/Materials and technology 46(2), 185-190.
• 11. Butković, S., 2013. Sinterability and Tensile Properties of Nickel Free Austenitic Stainless Steel X15CrMnMoN 17 11 3, Tehnički vjesnik (Technical Gazette) 20(2), 269-274.
• 12. Pandya, S., Ramakrishna, K.S., Annamalai, A.R., Upadhyaya, A., 2012. Effect of Sintering Temperature on the Mechanical and Electrochemical Properties of Austenitic Stainless Steel, Materials Science and Engineering A 556, 271–277.
• 13. Rudianto, H., Jang, G., Yang, S., Kim, Y., Dlouhy, I., 2015. Effect of SiC Particles on Sinterability of Al-Zn- Mg-Cu P/M Alloy”, Archives of Metallurgy and Materials, 60(2), 1383-1385.
• 14. Rudianto, H., Jang, G.J., Yang, S.S., Kim, Y.J. Dlouhy, I. (2015b). Evaluation of Sintering Behavior Of Premix Al-Zn- Mg-Cu Alloy Powder”, Advances in Materials Science and Engineering, Article ID 987687, 8.
• 15. Dyankova, S., Doneva, M., Todorov, Y., Terziyska, M., 2016. Determination of Particle Size Distribution and Analysis of a Natural Food Supplement on Pectin Base, IOSR Journal of Pharmacy, 6(5), 01-08.
• 16. Karthikeyan, B., Ramanathan, S., Ramakrishnan, V., 2010. A Calorimetric Study of 7075 Al/SiCp Composites, Materials and Design, 31, 92–95.
• 17. Karwan-Baczewska, J., 2015. Processing and Properties of Distaloy SA Sintered Alloys with Boron and Carbon, Archives of Metallurgy and Materials, 60(1), 41-45.
• 18. Abdoos, H., Khorsand, H., Shahani, A.R., Fatigue Behavior of Diffusion Bonded Powder Metallurgy Steel with Heterogeneous Microstructure, Materials and Design 30, 1026-1031.
• 19. Wilthan, B., Reschab, H., Tanzer, R., Schützenhöfer, W., Pottlacher, G., 2008. Thermophysical Properties of Chromium- Nickel-Molybdenum Steel in the Solid and Liquid Phases, Int. J. Thermophys., 29, 434-444.
• 20. Isfahany, A.N., Saghafian, H., Borhani, G., 2011. The Effect of Heat Treatment on Mechanical Properties and Corrosion Behaviour of AISI420 Martensitic Stainless Steel, Journal of Alloys and Compounds 509, 3931–3936
• 21. Acar, A.N., 2019. Investigation of Physical and Mechanical Properties of 316l and 410 Stainless Steels Manufactured by Powder Metallurgy Method Doctoral Thesis, Çukurova University, Institute of Natural and Applied Sciences, 139.
• 22. Moteshakker, A., Danaee I., 2016. Microstructure and Corrosion Resistance of DissimilarWeld-Joints between Duplex Stainless Steel 2205 and Austenitic Stainless Steel 316L Moteshakker, A., Danaee I., Journal of Materials Science and Technology, 32, 282-290.
• 23. Mamat, M.F., Hamzah E., Ibrahim, Z., Rohah, A.M., Bahador, A., 2015. Effect of Filler Metals on the Microstructures and Mechanical Properties of Dissimilar Low Carbon Steel and 316L Stainless Steel Welded Joints, Materials Science Forum, 819, 57-62.
• 24. Simionescu, N., Benea, L., Dumitrascu, V.M., 2018. The Synergistic Effect of Proteins and Reactive Oxygen Species on Electrochemical Behaviour of 316L Stainless SteelBfor Biomedical Applications, IOP Conf. Series: Materials Science and Engineering, 374 Euroinvent ICIR 2018 17–18 May 2018, Iasi, 1-7, Romania.