FARKLI KONSANTRASYONLARDAKİ POVİDON İYOTUN HİBRİT CAD/CAM MATERYALİNİN RENK STABİLİTESİNE ETKİSİ

Year 2022, Volume: 32 Issue: 1, 75 - 79, 15.02.2022

Gaye Sağlam

https://doi.org/10.17567/ataunidfd.1009742

Abstract

Amaç: Bu çalışmanın amacı, farklı konsantrasyonlardaki povidon iyot solüsyonlarının hibrit seramik CAD/CAM materyalinin renk stabilitesine etkisinin incelenmesidir.
Yöntemler: Çalışmada 2M2 rengine sahip Cerasmart (GC Corporation, Tokyo, Japonya) hibrit seramik bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM) bloklarından 1,5x12x12mm boyutunda 60 adet kesit elde edildi. Örneklerin başlangıç renk değerleri spektrofotometre cihazı ile CIE L*a*b* sistemine göre ölçüldü. Örnekler 24 saat süreyle bekletilecekleri solüsyonlara göre rastgele 3 gruba ayrıldı (n=20). Grup 1 kontrol grubu olarak belirlendi ve örnekler distile suda bekletildi. Grup 2’de örnekler %0,25’lik povidon iyot solüsyonunda bekletildi. Grup 3’de ise örnekler %2,5’lik povidon iyot solüsyonunda bekletildi. Örnekler temizlendi ve renk değerleri tekrar ölçüldü. Renk değişim miktarları ΔE cinsinden hesaplandı. Elde edilen verilerin istatistiksel analizi Kruskal-Wallis testi ile yapıldı.
Bulgular: Poivdon iyot solüsyonunda bekletilen örneklerde anlamlı derecede yüksek ΔE değerleri elde edildi (P < .05). %2,5’lik povidon iyot grubu %0.25’lik povidon iyot grubuna göre anlamlı derecede daha yüksek ΔE değerleri gösterdi (P < .05). %0,25’lik povidon iyot solüsyon grubunda elde edilen renk değişimi klinik olarak kabul edilebilir bulundu.
Sonuç: Povidon iyot solüsyonu rezin seramik CAD/CAM materyali üzerinde renk değişimine neden olmaktadır. Povidon iyotun daha yüksek konsantrasyonunda daha fazla renk değişimi izlenmektedir.
Anahtar kelimeler: hibrit seramik, CAD/CAM, povidon iyot, renk değişimi

Effect of povidone iodine at different concentrations on the color stability of hybrid CAD/CAM material
Abstract
Objective: The aim of this study was to investigate the effect of different concentrations of povidone iodine solutions on the color stability of hybrid ceramic CAD/CAM material.
Methods: In the study, 60 sections with dimensions of 1,5x12x12mm were obtained from Cerasmart (GC Corporation, Tokyo, Japan) hybrid ceramic computer aided desing/computer aided manufacturing (CAD/CAM) blocks with 2M2 color. The initial color values of the sections were measured with a spectrophotometer device according to the CIE L*a*b* system. Samples were randomly divided into 3 groups according to the solutions that they strored for 24 hours (n=20). Group 1 was determined as a control group and samples were kept in distilled water. In group 2, samples were kept in 0,25% povidone iodine solution. In group 3, samples were kept in 2,5% povidone iodine solution. The samples were cleaned and the color values were measured again. Color changes were calculated in ΔE. Statistical analysis of the data obtained was made using the Kruskal-Wallis test.
Results: Significantly higher ΔE values were obtained in samples kept in povidone iodine solution (P < .05). The 2,5% povidone iodine group showed significantly higher ΔE values than the 0,25% povidone iodine group (P < .05). The color change obtained in the 0,25% povidone iodine solution group was found clinically acceptable.
Conclusion: Povidone iodine solution caused color change on the resin ceramic CAD/CAM material. More color change was observed at higher concentrations of povidone iodine.
Keywords: hybrid ceramic, povidone iodine, color change

Keywords

hibrit seramik, CAD/CAM, povidon iyot, renk değişimi

FARKLI KONSANTRASYONLARDAKİ POVİDON İYOTUN HİBRİT CAD/CAM MATERYALİNİN RENK STABİLİTESİNE ETKİSİ

Abstract

Amaç: Bu çalışmanın amacı, farklı konsantrasyonlardaki povidon iyot solüsyonlarının hibrit seramik CAD/CAM materyalinin renk stabilitesine etkisinin incelenmesidir.
Yöntemler: Çalışmada 2M2 rengine sahip Cerasmart (GC Corporation, Tokyo, Japonya) hibrit seramik bilgisayar destekli tasarım/bilgisayar destekli üretim (CAD/CAM) bloklarından 1,5x12x12mm boyutunda 60 adet kesit elde edildi. Örneklerin başlangıç renk değerleri spektrofotometre cihazı ile CIE L*a*b* sistemine göre ölçüldü. Örnekler 24 saat süreyle bekletilecekleri solüsyonlara göre rastgele 3 gruba ayrıldı (n=20). Grup 1 kontrol grubu olarak belirlendi ve örnekler distile suda bekletildi. Grup 2’de örnekler %0,25’lik povidon iyot solüsyonunda bekletildi. Grup 3’de ise örnekler %2,5’lik povidon iyot solüsyonunda bekletildi. Örnekler temizlendi ve renk değerleri tekrar ölçüldü. Renk değişim miktarları ΔE cinsinden hesaplandı. Elde edilen verilerin istatistiksel analizi Kruskal-Wallis testi ile yapıldı.
Bulgular: Poivdon iyot solüsyonunda bekletilen örneklerde anlamlı derecede yüksek ΔE değerleri elde edildi (P < .05). %2,5’lik povidon iyot grubu %0.25’lik povidon iyot grubuna göre anlamlı derecede daha yüksek ΔE değerleri gösterdi (P < .05). %0,25’lik povidon iyot solüsyon grubunda elde edilen renk değişimi klinik olarak kabul edilebilir bulundu.
Sonuç: Povidon iyot solüsyonu rezin seramik CAD/CAM materyali üzerinde renk değişimine neden olmaktadır. Povidon iyotun daha yüksek konsantrasyonunda daha fazla renk değişimi izlenmektedir.
Anahtar kelimeler: hibrit seramik, CAD/CAM, povidon iyot, renk değişimi

Effect of povidone iodine at different concentrations on the color stability of hybrid CAD/CAM material
Abstract
Objective: The aim of this study was to investigate the effect of different concentrations of povidone iodine solutions on the color stability of hybrid ceramic CAD/CAM material.
Methods: In the study, 60 sections with dimensions of 1,5x12x12mm were obtained from Cerasmart (GC Corporation, Tokyo, Japan) hybrid ceramic computer aided desing/computer aided manufacturing (CAD/CAM) blocks with 2M2 color. The initial color values of the sections were measured with a spectrophotometer device according to the CIE L*a*b* system. Samples were randomly divided into 3 groups according to the solutions that they strored for 24 hours (n=20). Group 1 was determined as a control group and samples were kept in distilled water. In group 2, samples were kept in 0,25% povidone iodine solution. In group 3, samples were kept in 2,5% povidone iodine solution. The samples were cleaned and the color values were measured again. Color changes were calculated in ΔE. Statistical analysis of the data obtained was made using the Kruskal-Wallis test.
Results: Significantly higher ΔE values were obtained in samples kept in povidone iodine solution (P < .05). The 2,5% povidone iodine group showed significantly higher ΔE values than the 0,25% povidone iodine group (P < .05). The color change obtained in the 0,25% povidone iodine solution group was found clinically acceptable.
Conclusion: Povidone iodine solution caused color change on the resin ceramic CAD/CAM material. More color change was observed at higher concentrations of povidone iodine.
Keywords: hybrid ceramic, povidone iodine, color change

Keywords

hibrit seramik, CAD/CAM, povidon iyot, renk değişimi

References

• 1. Davidowitz G, Kotick PG. The use of CAD/CAM in dentistry. Dent Clin North Am. 2011;55(3):559-570.
• 2. Pop-Ciutrila IS, Dudea D, Eugenia Badea M, Moldovan M, Cîmpean SI, Ghinea R. Shade Correspondence, Color, and Translucency Differences between Human Dentine and a CAD/CAM Hybrid Ceramic System. J Esthet Restor Dent. 2016;28(1):46-55.
• 3. Dalpino PH, Francischone CE, Ishikiriama A, Franco EB. Fracture resistance of teeth directly and indirectly restored with composite resin and indirectly restored with ceramic materials. Am J Dent. 2002;15(6):389-394.
• 4. Available form: GC Cerasmart Product Description. 2014;800.323.7063 www.gcamerica.com.
• 5. Dietschi D, Campanile G, Holz J, Meyer JM. Comparison of the color stability of ten new-generation composites: an in vitro study. Dent Mater. 1994;10(6):353-362.
• 6. Derafshi R, Khorshidi H, Kalantari M, Ghaffarlou I. Effect of mouthrinses on color stability of monolithic zirconia and feldspathic ceramic: an in vitro study. BMC Oral Health. 2017;17(1):129.
• 7. Peng X, Xu X, Li Y, Cheng L, Zhou X, Ren B. Transmission routes of 2019-nCoV and controls in dental practice. Int J Oral Sci. 2020;12(1):9.
• 8. Carrouel F, Conte MP, Fisher J, et al. COVID-19: A Recommendation to Examine the Effect of Mouthrinses with β-Cyclodextrin Combined with Citrox in Preventing Infection and Progression. J Clin Med. 2020;9(4):1126.
• 9. O’Donnell VB, Thomas D, Stanton R, Maillard JY, Murphy RC, Jones SA, Humphreys I, Wakelam MJO, Fegan C, Wise MP, Bosch A, Sattar SA. Potential Role of Oral Rinses Targeting the Viral Lipid Envelope in SARS-CoV-2 Infection. Function (Oxf). 2020;1(1):zqaa002.
• 10. Bidra AS, Pelletier JS, Westover JB, Frank S, Brown SM, Tessema B. Rapid In-Vitro Inactivation of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) Using Povidone-Iodine Oral Antiseptic Rinse. J Prosthodont. 2020;29(6):529-533.
• 11. Foley TP Jr. The relationship between auto immune thyroid disease and iodine intake: a review. Endokrynol Pol. 1992;43:53-69.
• 12. Furudate S, Nishimaki T, Muto T. 125I uptake competing with iodine absorption by the thyroid gland following povidone-iodine skin application. Exp Anim. 1997;46(3):197-202.
• 13. Ruyter IE, Nilner K, Moller B. Color stability of dental composite resin materials for crown and bridge veneers. Dent Mater. 1987;3(5):246-251.
• 14. Eggers M, Koburger-Janssen T, Eickmann M, Zorn J. In Vitro Bactericidal and Virucidal Efficacy of Povidone-Iodine Gargle/Mouthwash Against Respiratory and Oral Tract Pathogens. Infect Dis Ther. 2018;7(2):249-259.
• 15. Kariwa H, Fujii N, Takashima I. Inactivation of SARS coronavirus by means of povidone-iodine, physical conditions and chemical reagents. Dermatology. 2006;212(1):119-223.
• 16. Parhar HS, Tasche K, Brody RM, Weinstein GS, O’Malley BW Jr, Shanti RM, Newman JG. Topical preparations to reduce SARS-CoV-2 aerosolization in head and neck mucosal surgery. Head Neck. 2020;42(6):1268-1272.
• 17. Mady LJ, Kubik MW, Baddour K, Snyderman CH, Rowan NR. Consideration of povidone-iodine as a public health intervention for COVID-19: Utilization as “Personal Protective Equipment” for frontline providers exposed in high-risk head and neck and skull base oncology care. Oral Oncol. 2020;105:104724.
• 18. Challacombe SJ, Kirk-Bayley J, Sunkaraneni VS, Combes J. Povidoneiodine. Br Dent J. 2020;228(9):656-657.
• 19. Gurenlian JR. The role of dental plaque biofilm in oral health. J Dent Hyg. 2007;81:1-11.
• 20. Gunsolley JC. Clinical efficacy of antimicrobial mouthrinses. J Dent. 2010;38:6-10.
• 21. Piskin B, Sipahi C, Akin H. Effect of different chemical disinfectants on color stability of acrylic denture teeth. J Prosthodont. 2014;23(6):476-483.
• 22. Kuzu T, Karataş Ö. Ağız gargaraları ve antiseptiklerinin farklı kompozit rezinlerin renk stabilitesine etkisi. Curr Res Dent Sci. 2021;31(1):71-76.
• 23. Da Silva JD, Park SE, Weber HP, Ishikawa-Nagai S. Clinical performance of a newly developed spectrophotometric system on tooth color reproduction. J Prosthet Dent. 2008;99(5):361-368.
• 24. Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: a review. Dent Mater. 2011;27(1):97-108.
• 25. Acar O, Yılmaz B, Altıntas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent. 2016;115(1):71-75.
• 26. Alp G, Subaşı MG, Seghi RR, Johnston WM, Yilmaz B. Effect of shading technique and thickness on color stability and translucency of new generation translucent zirconia. J Dent. 2018;73:19-23.
• 27. Lee JH, Kim SH, Yoon HI, Yeo IL, Han JS. Colour stability and surface properties of high-translucency restorative materials for digital dentistry after simulated oral rinsing. Eur J Oral Sci. 2020;128(2):170-180.
• 28. Atala MH, Yeğin E, Atala N, Senlen E, Bağlar S. Effects of mouthrinses on discoloration of CAD-CAM manufactured restorative materials. Am J Dent. 2019;32(6):293-2298.
• 29. Sagsoz O, Demirci T, Demirci G, Sagsoz NP, Yildiz M. The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics. J Adv Prosthodont. 2016;8(6):417-422.
• 30. Karaokutan I, Yilmaz Savas T, Aykent F, Ozdere E. Color stability of CAD/CAM fabricated inlays after accelerated artificial aging. J Prosthodont. 2016;25(6):472-477.
• 31. Liebermann A, Wimmer T, Schmidlin PR, et al. Physicomechanical characterization of polyetheretherketone and current esthetic dental CAD/CAM polymers after aging in different storage media. J Prosthet Dent. 2016;115(3):321-328.