Kaya Sınıflarına Göre Destek Sistemleri Belirlenmesi-Tlemcen-Akkid Abbas (Cezayir) Yüksek Hızlı Demiryolu Projesi

Year 2023, , 14 - 25, 31.01.2023

Ebu Bekir Aygar

https://doi.org/10.47072/demiryolu.1166236

Abstract

Tüneller için yapılan kaya kütle sınıflamalarında karşılaşılan en büyük sorunlardan birisi, tünel kesitinde farklı birimler geçilmesi durumunda hangi desteklerin uygulanacağıdır. Tünel kesitinde üst yarıda zayıf birim ile karşılaşılırken alt yarı ve invert kesimi ise sağlam birimde yer alabilmektedir. Bu durumlarda ise kaya kütlesi en kötü koşullara göre belirlenirken, destek sisteminde ise farklılıklar olabilmektedir. Üst yarıda ağır destek sistemi gerekirken invert kesiminin sağlam birimde kalması durumunda invert kazısı yapılmayabilir. Ayrıca zayıf zeminlerde açılan tünellerde karşılaşılan sorunlar genelde sıkışma mekanizmasına bağlı olarak tünel destek sistemlerinde yenilmeler ile tünel aynasında karşılaşılan stabilite sorunları olarak karşımıza çıkmaktadır. Zayıf zeminlerde genelde destek sistemlerinin tamamlanmasından sonra uzun dönemde yenilmeler meydana gelmektedir. Sığ tünellerde ise, tünel çevresinde kemerlenme sağlanamaması sebebi ile destek sistemlerimin tasarımı daha kritiktir. Zira deformasyonlara müsaade edilmesi tünel çevresinde yüzeye kadar etkileyecek deformasyonları tetikleyebilecektir. Ayrıca tünel aynasında kazı esnasında oluşabilecek bir yenilmenin etkisi yüzeye kadar obruk şekilde yansıması olacak ve tüm tünel destek sistemlerini etkileyecektir. Bu sebeple sığ örtü altında zayıf zeminlerde açılan tünellerde deformasyonlara müsaade edilmeden destek sistemleri tamamlanmalıdır. Ayrıca tünel aynasında herhangi bir göçüğün oluşmaması için ayna destek sistemlerinin yapılması zorunludur. Bu çalışma kapsamında Telmcen Akkid Abbas Yüksekl Hızlı Demıryolu Projesinde açılan T10 tüneli destek sistemleri ve tünel tasarımı incelenmekedir. Yapılan çalışma sonucunda zayıf zeminlerde tünel destek sistemlerinin belirlenmesinde ayna ve tavan stabilitesinin son derece önemli olduğu görülmüştür. Ayrıca uzun dönemde sıkışma sorunlarının önüne geçmek için tünel destek sistemi basıncı belirlenirken, kritik destek sistemi basıncından en az 2-3 kat yüksek olması gerektiği görülmüştür.

Keywords

Sıkışma, zayıf zemin, sığ örtü, tünel

Determination of Support Systems According to Rock Classes-Tlemcen-Akkid Abbas High Speed Railway Project-Algeria

Abstract

One of the biggest problems encountered in rock mass classifications for tunnels is which supports will be applied in case of passing with different units in the tunnel section. While a weak unit is encountered in the top heading of the tunnel section, bench and invert section can be found in the rock. In these cases, while the rock mass is determined according to the worst conditions, there may be differences in the support system. While heavy support system is required in the top heading invert excavation may not be performed if the invert section remains in the high qaulity rock mass. In addition, the problems encountered in tunnels excavated in weak untis are generally encountered as failures in the tunnel support systems due to the squeezing mechanism and stability problems encountered in the tunnel face. In weak units, long-term failures usually occur after the completion of the support systems. In shallow tunnels, the design of the support systems is more critical since arching cannot be achieved around the tunnel. Because allowing deformations may trigger deformations around the tunnel that affects up to the surface. In addition, the effect of a failure that may occur during excavation in the tunnel face may be reflected up to the surface and may affects all tunnel support systems. For this reason, support systems should be completed without allowing deformations in tunnels excavated on weak soils under shallow overburden. In addition, it is obligatory to make face support systems in order to prevent any collapse in the tunnel face. Within the scope of this study, T10 tunnel support systems and tunnel design excavated in Telmcen Akkid Abbas High Speed Railway Project is examined. As a result of the study, the stability of the tunne face and ceiling is extremely important in the determination of tunnel support systems in weak untis. In addition, the tunnel support system pressure should be at least 2-3 times higher than the critical support system pressure in order to prevent squeezing problems in the long term.

Keywords

Squeezing, weak soils, shallow overburden, tunnel

References

• [1] Z.T. Bieniawski, “Engineering classification of jointed rock masses,” Trans S. Afr. Inst. Civ. Engrs 15, 335-344. 1973.
• [2] Z.T. Bieniawski, “Rock mass classification in rock engineering,” In Exploration for rock engineering, proc. of the symp., (ed. Z.T. Bieniawski) 1, 97-106. Cape Town: Balkema. 1976.
• [3] Z.T. Bieniawski, Engineering rock mass classifications. New York: Wiley. 1989.
• [4] N.R. Barton, R. Lien, J. Lunde, “Engineering classification of rock masses for the design of tunnel support,” Rock Mech. 6(4), 189-239. 1974.
• [5] N. R. Barton, F. Løset, R. Lien, J. Lunde, “Application of the q-system in design decisions,” In Subsurface space, (ed. M. Bergman) 2, 553-561. New York: Pergamon.1981.
• [6] N.Barton, “Application of q-system and index tests to estimate shear strength and deformability of rock masses,” In Workshop on Norwegian Method of Tunnelling,pp. pp 66–84, New Delhi, India,1993.
• [7] L.v Rabcewicz, “The new austrian tunnelling method, Part One,” Water Power, pp 453–457, 1964.
• [8] L.v. Rabcewicz, “The new austrian tunnelling method, Part Two,” Water Power, pp 511–515, 1964.
• [9] L.v. Rabcewicz, “The new austrian tunnelling method, Part Three,” Water Power, pp 19–24, 1965.
• [10] L.v. Rabcewicz, J. Golser, “Principles of dimensioning the supporting system for the “new austrian tunnelling method,” Water Power, Marc, 88-93. 1973.
• [11] L. Müller, “Removing misconceptions on the new austrian tunnelling method,” Tunnels & Tunnelling International,10(8):29–32. 1978.
• [12] E.B. Aygar, C. Gökçeoğlu, “Ankara-istanbul yüksek hızlı tren projesi, t13 tüneli fay zonunda karşılaşılan sorunlar ve çözüm önerileri ankara-istanbul hıgh speed raılway project, the problems encountered at t13 tunnel fault zone and solutıon suggestıons,” IMCET 2019 / Antalya / Turkey / April 16 . 19, Proceedings 26th International Mining Congress and Exhibition of Turkey, 2019.
• [13] E.B. Aygar, C. Gökçeoğlu, “Problems encountered during a railway tunnel excavation in squeezing and swelling materials and possible engineering measures: a case study from turkey,” Sustainability, 12, 1166, https://doi.org/10.3390/su12031166, 2020.
• [14] E.B. Aygar, “Evaluation of new austrian tunnelling method applied to bolu tunnel’s weak rcoks,” Journal of Rock Mechanics and Geotechnical Engineering, 12, 541-546, 2020.
• [15] E.B. Aygar, C. Gokceoglu, “Effects of portal failure on tunnel support systems in a highway tunnel.”.Geotech Geol Eng, 39, 5707–5726. https://doi.org/10.1007/s10706-021-01859-z. 2021
• [16] C.O. Aksoy, K. Ogul, I. Topal, S.C.Ozer, V. Ozacar, E. Posluk, “Numerical modelling of non-deformable support in swelling and squeezing rock,” International Journal of Rock Mechanics & Mining Sciences, 52, 61-70, doi:10.1016/j.ijrmms.2012.
• [17] E.B. Aygar, S.Karahan, S. Gullu, C. Gokceoglu, “Analytical and numerical analyses of the support system for a large-span tunnel in challenging and seismically active ground conditions,” Transportation Infrastructure Geotechnology, https://doi.org/10.1007/s40515-022-00251-5.2022.
• [18] G. Barla, “Full face excavation of large tunnels in difficult conditions,”Journal of Rock Mechanics and Geotechnical Engineering, http://doi.org/10.1016/j.jrmge.2015.12.003.2015.
• [19] E. Hoek, “Tunnel support in weak rock,” In: Symposium of Sedimentary Rock Engineering, 631, 1-13. 1998.
• [20] G. Barla, “Tunnelling under squeezing rock conditions,” Tunnelling Mechanics-Advances in Geotechnical Engineering and Tunnelling, 2011.
• [21] P. Lınardi, “Design and construction tunnels-ADECO-RS approach,” Tunnels and Tunnelling Internations, Special Supplement May, 2000.
• [22] P.Lunardi, R. Bindhi, “The evaluation of reinforcement of the advance core using fiber glass elements for short and long term stability of tunnels under difficult stress-strain conditions: design, technologies and operating methods,” Progress in Tunnelling after 2000, AITES-ITA 2011 World Tunnel Congress, 2, 309-322. 2001.
• [23] E.B. Aygar,”Tünel projelendirilmesinde kullanılan yöntemler (ampirik, analitik ve nümerik yöntemler), kısıtlamaları, karşılaştırılması ve öneriler,” Demiryolu Mühendisliği, doi:10.47072/demiryolu.1030404.2022
• [24] J.L. Jethwa, A.K. Dube, B.Singh, B.Sing, “Squeezing problems in Indian tunnels,” International Conference on Case Histories in Geotechnical Engineering, 1984.
• [25] E. Hoek, P. Marinos, “Predicting tunnel squeezing,” Tunnels and Tunnelling International. Part 1 – November 2000, Part 2 – December, 2000.
• [26] E. Hoek, E.T. Brown, “Underground excavations in rock,”London:Instn Min. Metall, 1980.
• [27] E.Hoek. “Rock support interaction analysis for tunnels in weak rock masses,” https://www.rocscience.com/documents/pdfs/rocnews/winter2012/Rock-Support-Interaction-Analysis-for-Tunnels-Hoek.pdf. 2012.
• [28] N. Vlachopoulos, M.S. Diedrichs, “Improved longitudinal displacement profiles for convergence confinement analysis of deep tunnels,”Rock.Mech.&Rock Eng.42:2,131-136. 2009.