Farklı Ağız Gargaralarının Geçici Kuron Materyallerinin Renk Stabilitesi Üzerindeki Etkisi: in vitro Çalışma

Abstract

Giriş: Ağız gargaraları, oral hijyenin sağlanmasında yaygın olarak kullanılmakta olup geçici kuron materyallerinin renk stabilitesini etkileyebilmektedir. Bu çalışmanın amacı, farklı ağız gargaralarının geçici kuron materyallerinin renk stabilitesi üzerindeki etkisini incelemektir. Gereç ve Yöntem: Polimetil metakrilat, bis-akrilik rezin ve fotopolimer rezin materyallerden hazırlanan örnekler Andorex, Listerine ve distile su içerisinde bekletildi. Renk değişimleri spektrofotometre ile ölçülerek ΔE00 değerleri hesaplandı. Veriler istatistiksel olarak analiz edildi (p<0,05). Bulgular: Materyal ve gargara türünün renk değişimi üzerinde anlamlı etkisi bulundu. En yüksek renk değişimi Andorex içerisinde bekletilen fotopolimer rezin grubunda gözlendi. Zaman faktörünün etkisi anlamlı bulunmadı. Sonuçlar: Ağız gargaraları geçici kuron materyallerinin renk stabilitesini etkilemektedir. Fotopolimer rezin materyaller daha fazla renk değişimi gösterirken, Andorex gargara en fazla renklenmeye neden olmuştur.

Keywords

• ağız gargaraları
• geçici kuron materyalleri
• renk stabilitesi

The Effect of Different Mouthwashes on the Color Stability of Temporary Crown Materials: An In Vitro Study

Abstract

Introduction: Mouthwashes are widely used for maintaining oral hygiene and may affect the color stability of provisional crown materials. The aim of this study was to evaluate the effect of different mouthwashes on the color stability of provisional crown materials. Materials and Methods: Specimens prepared from polymethyl methacrylate, bis-acrylic resin, and photopolymer resin materials were immersed in Andorex, Listerine, and distilled water. Color changes were measured using a spectrophotometer, and ΔE00 values were calculated. Data were statistically analyzed (p<0.05). Results: Material type and mouthwash type had a significant effect on color change. The highest color change was observed in the photopolymer resin group immersed in Andorex. The effect of time was not statistically significant. Conclusions: Mouthwashes affect the color stability of provisional crown materials. Photopolymer resin materials showed greater color change, while Andorex mouthwash caused the highest discoloration.

Keywords

• color stability
• mouthwashes
• provisional crown materials

References

1. 1. Burns DR, Beck DA, Nelson SK. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. J Prosthet Dent. 2003;90(5):474–497.
2. 2. Gratton DG, Aquilino SA. Interim restorations. Dent Clin North Am. 2004;48(2):487–497.
3. 3. Rayyan MM, Aboushelib M, Sayed NM, Ibrahim A, Jimbo R. Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually. J Prosthet Dent. 2015;114(3):414–419.
4. 4. Değer Y, Bakır M, Demirci F, Deveci B. Color stability of provisional restorative materials in different mouthwash solutions. Adv Mater Sci Eng. 2022;2022(1):9130117.
5. 5. Doray PG, Li D, Powers JM. Color stability of provisional restorative materials after accelerated aging. J Prosthet Dent. 2001;10(4):212–216.
6. 6. Güngör MB, Nemli SK, Bal BT, Doğan A. Farklı içeceklerde bekletilen geçici restorasyon materyallerinin renk stabilitelerinin karşılaştırılması. Acta Odontol Turc. 2016;33(2):80–85.
7. 7. Sham AS, Chu FC, Chai J, Chow TW. Color stability of provisional prosthodontic materials. J Prosthet Dent. 2004;91(5):447–452.
8. 8. Sasany R, Ergun‐Kunt G, Yilmaz B. Effect of mouth rinses on optical properties of CAD‐CAM materials used for laminate veneers and crowns. J Esthet Restor Dent. 2021;33(4):648–653.

9. 9. Myagmar G, Lee J-H, Ahn J-S, Yeo I-SL, Yoon H-I, Han J-S. Wear of 3D printed and CAD/CAM milled interim resin materials after chewing simulation. J Adv Prosthodont. 2021;13(3):144-151.
10. 10. Fernandes FP, Turssi CP, França FMG, Basting RT, do Amaral FLB. Whitening mouthwash containing hydrogen peroxide decreases enamel microhardness in vitro. Braz J Oral Sci. 2017;16:1–9.
11. 11. Cunha Coelho ASE, Palmeirão Carrilho TM, Roque Botelho MFR, Pereira Paula AB, Fernandes da Silva MJR, Palmeirão Carrilho EVVFB. Chlorhexidine mouthwash as an anticaries agent: A systematic review. Quintessence Int. 2017;48(7):585-591.
12. 12. Bayindir F, Kürklü D, Yanikoğlu ND. The effect of staining solutions on the color stability of provisional prosthodontic materials. J Dent. 2012;40:e41–46.
13. 13. Doray PG, Wang X, Powers JM, Burgess JO. Accelerated aging affects color stability of provisional restorative materials. J Prosthodont. 1997;6(3):183–188.
14. 14. Jeong K-W, Kim S-H. Influence of surface treatments and repair materials on the shear bond strength of CAD/CAM provisional restorations. J Adv Prosthodont. 2019;11(2):95–104.
15. 15. Alharbi N, Alharbi S, Cuijpers VM, Osman RB, Wismeijer D. Three-dimensional evaluation of marginal and internal fit of 3D-printed interim restorations fabricated on different finish line designs. J Prosthodont Res. 2018;62(2):218–226.
16. 16. Scotti CK, Velo MMdAC, Rizzante FAP, de Lima Nascimento TR, Mondelli RFL, Bombonatti JFS. Physical and surface properties of a 3D-printed composite resin for a digital workflow. J Prosthet Dent. 2020;124(5):614. e1–. e5.
17. 17. Shin J-W, Kim J-E, Choi Y-J, Shin S-H, Nam N-E, Shim J-S, et al. Evaluation of the color stability of 3D-printed crown and bridge materials against various sources of discoloration: An in vitro study. Materials. 2020;13(23):5359.
18. 18. Myagmar G, Daher R, Yeo I-SL, Ahn J-S, Han J-S, Lee J-H. Color and surface stainability of additively and subtractively manufactured interim restorative materials against mouth rinses. J Prosthet Dent. 2023;130(6):927–934.
19. 19. Stober T, Gilde H, Lenz P. Color stability of highly filled composite resin materials for facings. Dent Mater. 2001;17(1):87–94.
20. 20. Braden M, Causton E, Clarke R. Diffusion of water in composite filling materials. J Dent Res. 1976;55(5):730–732.
21. 21. Bagis B, Baltacioglu E, Oezcan M, Ustaomer S. Evaluation of chlorhexidine gluconate mouthrinse-induced staining using a digital colorimeter: an in vivo study. Quintessence Int. 2011;42(3):213-223.
22. 22. Celik C, Yuzugullu B, Erkut S, Yamanel K. Effects of mouth rinses on color stability of resin composites. Eur J Dent. 2008;2(04):247–253.
23. 23. Gürgan S, Önen A, Köprülü H. In vitro effects of alcohol‐containing and alcohol‐free mouthrinses on microhardness of some restorative materials. J Oral Rehabil. 1997;24(3):244–246.
24. 24. Villalta P, Lu H, Okte Z, Garcia-Godoy F, Powers JM. Effects of staining and bleaching on color change of dental composite resins. J Prosthet Dent. 2006;95(2):137–142.
25. 25. Yesil DZ, Fındık AS, Yanikoglu N. The effect of different staining solutions on the color stability of temporary crown materials. Niger J Clin Pract. 2023;26(2):234-239.
26. 26. Prasad DK, Alva H, Shetty M. Evaluation of colour stability of provisional restorative materials exposed to different mouth rinses at varying time intervals: an in vitro study. J Indian Prosthodont Soc. 2014;14(1):85–92.
27. 27. Paravina RD, Pérez MM, Ghinea R. Acceptability and perceptibility thresholds in dentistry: A comprehensive review of clinical and research applications. J Esthet Restor Dent. 2019;31(2):103–112.
28. 28. Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J Dent. 2010;38:e57–e64.
29. 29. Seghi RR, Hewlett E, Kim J. Visual and instrumental colorimetric assessments of small color differences on translucent dental porcelain. J Dent Res. 1989;68(12):1760–1764.
30. 30. Baig AR, Shori DD, Shenoi PR, Ali SN, Shetti S, Godhane A. Mouthrinses affect color stability of composite. J Conserv Dent Endod. 2016;19(4):355–359.