TALK VE EPDM MİKTARININ PP/TALK/EPDM KOMPOZİTİNİN MEKANİKSEL ÖZELLİKLERİNE ETKİSİNİN İNCELENMESİ

Abstract

Bu çalışmada, talk ve EPDM miktarının PP/Talk/EPDM kompozitlerinin çekme ve darbe dayanımı gibi mekanik özellikleri üzerine etkileri incelenmiştir. Bu amaçla, PP polimerine %15 talk ve % 5-20 oranlarında EPDM elastomeri ilave edilmiştir. Karışım çift vidalı ekstruderde gerçekleştirilmiş olup, çekme ve darbe numuneleri enjeksiyonla kalıpla tekniği kullanılarak gerçekleştirilmiştir. Çalışma sonucunda, PP polimerine ilave edilen talk minerali ile çekme dayanımı ve elastisite modülü artarken darbe dayanımı azalmıştır. Bununla birlikte, PP/Talk/EPDM polimer kompozitinde artan EPDM miktarı ile çekme dayanımı ve elastisite modülü azalırken darbe dayanımı artmıştır. Kırılma analizleri SEM analizi ile yapılmıştır

Keywords

• Özet: Bu çalışmada, talk ve EPDM miktarının PP/Talk/EPDM Polipropilen, EPDM, kompozitlerinin çekme ve darbe dayanımı gibi mekanik özellikleri

Investigation of The Effect of The Amount of Talk and EPDM onMechanical Properties of PP/Talc/EPDM Composites

Abstract

In this study, the effect of talc and EPDM content on mechanical properties such as tensile and impact of PP/Talc/EPDM composite samples were examined. For this purpose, 15% talc and 5-20% EPDM was added to PP polymer. The mixture has taken placed in a twin screw extruder, and tensile and impact specimens were performed using the injection molding technique. As a result of, the tensile strength and modulus of elasticity increased while impact strength increased with talc added to PP polymer. Furthermore, tensile strength and modulus of elasticity decreased while impact strength increased with increase amount of the EPDM in the PP/Talk/EPDM polymer composite. Fracture surface analyzes were performed by SEM analysis

Keywords

• Polypropylene, EPDM, Talc, Mechanical properties

References

1. Iman, H., Javad, S., Gity, M.M.S., Seyed, M.D. 2011. Assessment of rheological properties materials based on thermoplastic olefin blend and organoclay,
2. Materials and Design, Cilt. 32, s. –655. mechanical of nanostructured Karger-Kocsis J. (Ed.). 1995,
3. Polypropylene; strucuture, blends and Chapman & Hall. Cambridge: Yang, Y., Chen, J., Yuan, Q., Misra, R.D.K. 2011. Structure–property relationship in impact modified nanoclay-reinforced polypropylene, Materials Science and Engineering A, Cilt. 528, s.1857–1863.
4. Xinqing, S., Youqing, H., Jinliang, Q., Yiqun, L., Xiaohong, Z., Jianming, G., Zhihai, S., Fan, H., Manli, Z. 2004. The Microstructure and Properties in
5. PP/Rubber Powder/nano-CaCO3 Ternary Blends, Macromolecular Materials and Engineering, Cilt. , s.275–280. between Sedigheh, B.K., Daniel, F., Yanhui, C., Luke, M.G., Alireza, K., Reza, B., Clement, L.H., Hongzhou, Z., Biqiong, C. 2012. Morphology, rheology properties polypropylene/ethylene–octene copolymer/clay nanocomposites:
6. Effects of the compatibilizer, Composites Science and Technology, Cilt. 72, s.1697–1704. mechanical of
7. Hong, Y., Qin, Z., Min, G., Cong, W., Rongni, D., Qiang, F. 2006. Study on the toughening PP/EPDM/SiO2 composites, Polymer, Cilt. 47, s. –2115. and in ternary
8. Bendjaouahdou, C., Bensaad, S. Properties of Polypropylene/(NaturalRubber)/ Organomontmorillonite Nanocomposites Prepared by Melt Blending, Journal Of Vınyl & Addıtıve Technology, s. 48-57. Joy, K.M., Keun-Joon, H., Chang-Sık, H. 2005. Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO) / organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer, Polymer, Cilt.46, s.1995–2002.

9. Yiqun, L., Marianna, K. 2006. The structure and physical properties of thermoplastic nanocomposites nanosilica, Polymer, Cilt.47, s.7731- and olefin containing Rajkiran, R.T., Paul, D.R. 2011.
10. Polypropylene-elastomer nanocomposites: 1. Morphology, Polymer, Cilt.52, s. 4955-4969.
11. Qiu, M., Xuming, S., Patricia, C.T., Xinmin, L., Zhongqin, L. 2010. Mechanical
12. Thermoplastic Olefin Composites: Effect of Fillers Content, Strain Rate and Temperature, Polymer- Plastics Engineering, Cilt. 49, s.121–127. Hugo, M.T., Daiane, T., Fabrício, C., Vanda, F.R., Sônia, M.B.N. 2013. Use of wollastonite in a thermoplastic elastomer composition, Polymer Testing, Cilt.32, s.1373–1378.
13. Matonis, V.A., Small, N.C. 1969. A macroscopic composites containing layered spherical
14. Engineering Science, Cilt.9, s.99- of inclusion, Polymer Matonis, V.A., Small, N.C. 1969. The interfacial streses in particulate composite
15. Engineering Science, Cilt.9, s.100- Polymer mechanical-properties of of composites wıthınorganıc Cheng, T.W., Keskkula. H., PAUL, D.R. Morphology Ternary Blends of Polycarbonate, Brittle Polymers And an İmpact Modifier, Polymer, CİLT. 33, S. 606- and for Lubomır, L.J., Pavlına, J., Barbora, L., Rıchard, T., Rıchard, G., Neıl, R. Effect of the talc filler content properties composites, Journal of Applied Polymer Science, Cilt.110, s. 2742– mechanical of polypropylene
16. Leong, Y.W., Bakar, A.M.B., Ishak, Z.A.M., Ariffin, A., Pukanszky, B. mechanical interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites, Journal of Applied Polymer Science, Cilt.91, s. 3315–3326. of the and properties
17. Öksüz, M., Eroglu, M., Yıldırım, H. Effect of talc on the properties of Polypropylene / Ethylene / Propylene / Diene terpolymer blends, Journal of Applied Polymer Science, Cilt.101, s. –3039.
18. Tara, J.M. 2007. Properties and Foaming thermoplastic olefin blends based on polypropylene, Degree of Master of
19. Science (Engineering), Queen’s University, Canada. of linear and branched Kingston, Ontario, Qıu, M., Xumıng, S., Patrıcıa, C.T., Xınmın, L., Zhongqın, L. 2010. Mechanical thermoplastic olefin composites: of
20. Effect of fillers content, strain rate and temperature, Polymer-Plastics Technology Cilt.49, s.121–127. Krıstıına, O., Craıg, C. 1998. Mechanical polypropylene-wood morphology of impact modified flour composites, Journal of Applied
21. Polymer Science, Cilt. 67, s. 1503- properties and Chandra, A., Gong, S., Mıngjun, Y.,
22. Lıh-Sheng, T., Paul, G., Holger, C. crystallography in microcellular injection-molded nanocomposite and neat resın, Polymer Engineering and Science, s. 61. and Polyamide-6 Marerı, P., Bastıde, S., Bında, N., Crespy, 1998. A. Mechanical behaviour composites containing fine mineral filler: effect of filler surface treatment, Composites Science and Technology, Cilt. 58, s. 747-752. Suresha, B., Ravı, B.N.K.,
23. Venkataramareddy, M., Jayaraju, T. Role of micro/nano fillers on mechanical properties of Polyamide66 / Polypropylene Materials and Design, Cilt. 31, s. –2000. tribological composites,
24. Gafur, M.A., Rahıma, N., Forhad, M.M., Abu, M.H.B., Yukıhıro, T., Tsutomu, A. 2010. Structures and properties of the compression- molded istactic-polypropylene/talc composites: Effect of cooling and rolling, Polymer Degradation and Stability, Cilt. 95, s. 1818-1825.