DYNAMIC STABILITY ANALYSIS OF LAMINATED CURVED BEAMS

Abstract

In this study, the effects of variations of subtended angle and orientation angle of a laminated curved beam having an in-plane curvature, on the dynamic stability have been investigated by using the Finite Element Method. In addition, the results obtained from this study are compared with the results obtained from ANSYS program for the fundamental natural frequency and critical buckling load. The effects of variations of subtended angle, orientation angle, static and dynamic load parameters on the stability regions are shown in graphics.

Keywords

• Dynamic stability, Laminated curved beam, Vibration, Finite elements

TABAKALI EĞRİ ÇUBUKLARIN DİNAMİK KARARLILIK ANALİZİ

Abstract

Bu çalışmada, düzlem içerisinde belirli bir eğriliğe sahip tabakalı kompozit dairesel bir yay parçasının, merkez açısının ve tabakalardaki fiber açılarının değişiminin dinamik kararlılığa etkileri sonlu elemanlar metodu kullanılarak araştırılmıştır. Ayrıca birinci doğal frekans ve burkulma yükü değerleri ANSYS programından elde edilen sonuçlarla karşılaştırılmış ve eğri çubuğun merkez açısının, fiber açılarının, statik ve dinamik yük parametresinin kararlılık bölgeleri üzerindeki etkileri grafikler ile gösterilmiştir

Keywords

• Dinamik kararlılık, Tabakalı kompozit eğri çubuk, Titreşim, Sonlu elemanlar

References

1. Bazant Z. P., Cedolin L. (1991): “Stability of Structures”, Oxford University Press, New York.
2. Bolotin V. (1964): “The Dynamic Stability of Elastic Systems”, Holden-Day, San Francisco.
3. Karaağaç C., Öztürk H., Sabuncu M. (2011): “Crack Effects on the In-plane Static and Dynamic Stabilities of a Curved Beam with an Edge Crack”, Journal of Sound and Vibration, Cilt 330, s. 1718-1736.
4. Kawakami M., Sakiyama T., Matsuda H., Morita C. (1995): “In-Plane and out-of-Plane Free
5. Vibrations of Curved Beams with Variable Sections”, Journal of Sound and Vibration, Cilt , s. 381-401. Loja M. A. R., Barbosa J. I., Soares C. M. M. (1997): “Buckling Behaviour of Laminated
6. Beam Structures Using a Higher-Order Discrete Model”, Composite Structures, Cilt 38, s.119-131. Petyt M., Fleischer C. C. (1971): “Free Vibration of a Curved Beam”, Journal of Sound and Vibration, Cilt 18, s.17-30.
7. Qatu M. S. (1992): “In-Plane Vibration of Slightly Curved Laminated Composite Beams”,
8. Journal of Sound and Vibration, Cilt 159, s.327-338. Qatu M. S. (1993): “Theories and Analyses of Thin and Moderately Thick Laminated

9. Composite Curved Beams”, International Journal of Solids and Structures, Cilt 30, s.2743
10. Reddy J. N. (1997): “Mechanics of Laminated Composite Plates Theory and Analysis”, CRS Press, New York, s.856.
11. Sabır A. B., Ashwell D. G. (1971): “A Comparasion of Curved Beam Finite Elements when
12. Used in Vibration Problem”, Journal of Sound and Vibration, Cilt 18, s.555-563. Sabuncu M. (1978): “Vibration Characteristics of Rotating Aerofoil Cross Section Bladed
13. Disc Assembly”, University of Surrey, Ph.D Thesis, s.548. Thomas J., Abbas B. A. H. (1976): “Dynamic Stability of Timoshenko Beam by Finite
14. Element Method”, Journal of Engineering for Industry,Transaction of ASME Cilt 98, s.1145–1151.
15. Timoshenko S. P., Gere J. M. (1961): “Theory of Elastic Systems”, McGraw-Hill Book Company, s.560.
16. Tseng Y. P., Huang C. S., Kao M. S. (2000): “In-plane Vibration of Laminated Curved
17. Beams with Variable Curvature by Dynamic Stiffness Analysis”, Composite Structures, Cilt 50, s.103-114. Yoo C. H., Kang Y. J., Davidson J. S. (1996): “Buckling Analysis of Curved Beams by Finite
18. Element Discretization”, Journal of Engineering Mechanics, Cilt 122, s.762-770.