STRUCTURAL CHARACTERISTIC OF THE AREA BETWEEN KORUALAN AND BAĞBAŞI: HADİM-KONYA

Volume: 2 Number: 3 September 1, 2000
  • Ahmet Turan
EN TR

STRUCTURAL CHARACTERISTIC OF THE AREA BETWEEN KORUALAN AND BAĞBAŞI: HADİM-KONYA

Abstract

Autochthonous Geyikdağı Unit and tectonic slides of Hadim nappes (which are parts of the Bozkır and Bolkardağı ? units) characterize the study area. The Geyikdağı Unit is intervered by a regional unconformity, which is related to Early Kimmercian movements. MiddleUpper Jurassic cover rocks are found over the Cambrian Ordovician deposits. At the base of the Upper Cretaceous the rare existence of red conglomerate and bauxitic pebles indicate a low-angle disconformity. Lutetian carbonates were deposited with a low-angle disconformity over the autochthonous unit of Upper Jurassic-Upper Cretaceous carbonates. This unconformity is the traces of Anotolian orogenic phase. Bozkır Unit consists from bottom to top of: the Taşkent ophiolitic melange nappe (Late Cretaceous-Paleocene), pelagic deposits of the Korualan nappe and Dedemli nappe (Mesozoic) which are made of island-arc volcanites. The Bolkardağı Unit in the upper part of the sequence, is made up of the metaolistostromal Hocalar nappe (Triassic?) and Sinatdağı nappe. Regional unconformity between Late Permian and Middle Triassic carbonates in the Sinatdağı nappe is related to Late Hercinian movements. Allochthonous units are transported in the paroxsism of the Pyrenian orogenesis. Morphologic features of the region have been controlled by the WNW-ESE trending structural movements. Contour diagrams of the allochthonous and autochthonous units indicate a N10-25 E trending compressional stress in the region.

Keywords

References

  1. Blumenthal M.M., (1944): “Bozkır Güneyinde Toros Dağlarının Serisi ve Yapısı”, İst.Üniv. Fen Fak. Mec., Seri B, 95-125.
  2. Demirkol C., (1984): “Geology and Tectonics of The Region Sout of Çay (Afyon)”, Geology of the Taurides, Interna, Symp., 69-75, Ankara.
  3. Demirkol C., (1986): “Sultandağı ve Dolayının Tektoniği”, M.T.A. Ens. Derg., C 107, 111- 118.
  4. Demirtaşlı E., (1984): “Stratigraphy and Tectonics of The Area Between Silifke and Anamur Central Taurus Mauntains”, Geology of the Taurus Belt, Int. Symp., 101-118 p., Ankara.
  5. Demirtaşlı E., Gedik İ., İmik M., (1986): “Ermenek Batısında, Göktepe-Dumlugöze ve Tepebaşı Arasında Kalan Bölgenin Jeolojisi”, MTA Derleme Rap. No: 2794, 43 s., Ankara.
  6. Eren Y., (1990): “Engilli (Akşehir) ve Bağkonak (Yalvaç) Köyleri Arasında Sultan Dağları Masifinin Tektonik Özellikleri”, Türkiye Jeol. Bült., 33/1, 39-50.
  7. Gedik İ., (1989): “Batı Toroslar Kambriyen’inde Hadimopanellid Biyostratigrafisi, Kambriyen’de Yeni Bir Stratigrafik Zonlanma”, Türkiye Jeol. Bült., 32/1-2, 65-78.
  8. Gökdeniz S., (1981): “Recherches Geogogiques Dans Les Taurides Occidentales Entre Karaman et Ermenek (Turquie)”, Le titre de docteur 3 eme cycle, Univesite de Paris-Sud Centre D’Orsay, 202 P.

Details

Primary Language

Turkish

Subjects

-

Journal Section

-

Authors

Ahmet Turan This is me

Publication Date

September 1, 2000

Submission Date

September 1, 2000

Acceptance Date

-

Published in Issue

Year 2000 Volume: 2 Number: 3

APA
Turan, A. (2000). KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen Ve Mühendislik Dergisi, 2(3), 51-65. https://izlik.org/JA87MM28SC
AMA
1.Turan A. KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ. DEUFMD. 2000;2(3):51-65. https://izlik.org/JA87MM28SC
Chicago
Turan, Ahmet. 2000. “KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ”. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen Ve Mühendislik Dergisi 2 (3): 51-65. https://izlik.org/JA87MM28SC.
EndNote
Turan A (September 1, 2000) KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 2 3 51–65.
IEEE
[1]A. Turan, “KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ”, DEUFMD, vol. 2, no. 3, pp. 51–65, Sept. 2000, [Online]. Available: https://izlik.org/JA87MM28SC
ISNAD
Turan, Ahmet. “KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ”. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 2/3 (September 1, 2000): 51-65. https://izlik.org/JA87MM28SC.
JAMA
1.Turan A. KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ. DEUFMD. 2000;2:51–65.
MLA
Turan, Ahmet. “KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ”. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen Ve Mühendislik Dergisi, vol. 2, no. 3, Sept. 2000, pp. 51-65, https://izlik.org/JA87MM28SC.
Vancouver
1.Ahmet Turan. KORUALAN VE BAĞBAŞI (HADİM-KONYA) ARASINDAKİ BÖLGENİN YAPISAL ÖZELLİKLERİ. DEUFMD [Internet]. 2000 Sep. 1;2(3):51-65. Available from: https://izlik.org/JA87MM28SC

This journal is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).

download?token=eyJhdXRoX3JvbGVzIjpbXSwiZW5kcG9pbnQiOiJmaWxlIiwicGF0aCI6IjliNTAvMDBjMi8xZmIxLzY5MjZmZDIyOGE1NzgyLjA3MzU5MTk2LnBuZyIsImV4cCI6MTc2NDE2OTMzMSwibm9uY2UiOiI2MTU1ODg1NGZlYzhkZTA1OThkNTU2NGFmYTQzYTc0YiJ9.O5b4Ex8bMlFv5797LL8VnE9YWS_X5880dfbmOp2-kc8