Current Materials of Chairside Cad/CaM Systems

Year 2015, , 9 - 12, 01.01.2015

Ülkü Ordu Seda Cengiz

https://doi.org/10.21306/jids.2015.1.02

Cited By: 1

Abstract

Nowadays, with the developments in the Cad/CaM computer aided design / computer aided manufacturing technology; chairside applications which decreases dependence on laboratory became widespread. The advantage of the chairside Cad/CaM applications is possibility of production of restorations in one appointment and the disadvantage is high cost. Block materials for milling units for chairside applications are feldspathic ceramic, leucite-reinforced glassceramic, lithium disilicate, composite, hybrid ceramic and acrylate polymer which used for the fabrication of long term temporaries. The purpose of this compilation is to present features and indications of current materials for chairside Cad/CaM procedures

Keywords

Cad/CaM, Blok materials

Klinikte Kullanılan CAD/CAM Sistemlerinin Güncel Materyalleri

Abstract

Günümüzde Cad/CaM bilgisayar destekli tasarım / bilgisayar destekli üretim teknolojisindeki hızlı gelişmeler sayesinde, laboratuvar işlemlerini ortadan kaldıran klinik uygulamalar oldukça yaygınlaşmıştır. Klinikte kullanılan Cad/CaM sistemlerinin avantajı; dijital ölçü sonrası tasarımın ve üretimin aynı gün içinde gerçekleştirilerek, tedavinin hızlı bir şekilde sonlanması; dezavantajı ise maliyetinin yüksek olmasıdır. Günümüzde klinikte kullanılan Cad/CaM sistemlerinde kullanılan blok materyalleri feldspatik seramikler, lösitle güçlendirilmiş cam seramikler, lityum disilikat gibi yüksek dirence sahip cam seramikler, kompozitler, hibrit seramikler, geçici restorasyonların üretilmesinde kullanılan akrilat polimerlerdir. Bu derleme klinik Cad/CaM materyallerinin özelliklerini ve kullanım alanlarını sunmayı amaçlamaktadır

Keywords

Cad/CaM, Blok materyaller

References

• 1. Zimmerman M et al. New CAD-CAM materials and blocks for chairside procedure. Int J Comp Dent 2013; 16:173- 181.
• 2. Fasbinder DJ, Chairside CAD/CAM: an overview of restorativematerialoptions. Compend Contin Educ Dent 2012; 33(1):50, 52-58.
• 3. Çelik G ve ark. Bilgisayar destekli diş hekimliği ve güncel CAD-CAM sistemleri. Cumhuriyet Dent J 2013; 16:74-82.
• 4. Mormann WH et al. The Cerec system: computerassisted preparation of direct ceramic inlays in one setting. Quintessenz 1987;38:457-470.
• 5. Mormann WH et al. Chairside computer aided direct ceramic inlays. Quintessence Int 1989;20:329-339.
• 6. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008;24:299-307.
• 7. VitaBlocs. Product Information. VITA, BadSäckingen, Germany. April 2015. www.vita-zahnfabrik.com/en/ VITABLOCS-Mark-II-25030,27568,85234.html.
• 8. http://www.sirona.com/en/products/digital-dentistry/cadcam-materials/?tab=254.
• 9. Kelly JR et al. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 1996;75:18-32.
• 10. Giardano RA. Dental ceramic restorative systems. Compend Contin Educ Dent 1996;17:779-782, 784-786 passim; quiz 794.
• 11. Fasbinder DJ. Restorative material options for CAD/CAM restorations. Compend Contin Educ Dent 2002;23:911- 916, 918, 920 passim; quiz 924.
• 12. http://www.ivoclarvivadent.us/empress/documents/ empresscad_broch.pdf.
• 13. Reich S, Hornberger H. The effect of multicolored machinable ceramics on the esthetics of all-ceramic crowns. J Prosthet Dent 2002;88:44-49.
• 14. Rosenstiel SF et al. Contemporary Fixed Prosthodontics. 4th ed. St. Louis: Mosby Elsevier; 2006.
• 15. Taskonak B et al. Residual stresses in bilayer dental ceramics. Biomaterials 2005;26:3235-3241.
• 16. Güth JF et al. Optical properties of manually and CAD/ CAM-fabricated polymers. Dent Mater J 2013;32:865-871.
• 17. Vita-Suprinity. Product Information. VITA, BadSäckingen, Germany. June 2013. https://www.vita-zahnfabrik.com/ en/VITA-SUPRINITY-27559,27568,85238.html.
• 18. https://www.dentsply.com/content/dam/dentsply/pim/ manufacturer/Prosthetics/CAD___CAM/Materials/ ZLS___High_Strength_Glass/Celtra_DUO/091002- Celtra-Duo-Dentist-Brochure-o4rbhni-en-1508.pdf.
• 19. Raigrodski AJ. Contemporary all ceramic fixed partial dentures: a review. Dent Clin North Am 2004;48:viii, 531- 544.
• 20. Vita-Enamic. Product Information. VITA, BadSäckingen, Germany. March 2015. https://www.vita-zahnfabrik.com/ en/VITA-ENAMIC-27589,27568,85233.html.
• 21. Lauvahutanon S et al. Mechanical properties of composite resin blocks for CAD/CAM. Dent Mater J 2014; 33:705- 710.
• 22. http://shofu.de/en/produkte/cadcam-materials/shofublock-hc-disk-hc/.
• 23. Fradeani M et al. Five-year follow-up with Procera allceramic crowns. Quintessence Int 2005;36:105-113.
• 24. http://www.3m.com/3M/en_US/Dental/Products/LavaUltimate/.
• 25. A Lauvahutanon S et al. Mechanical properties of composite resin blocks for CAD/CAM. Dent Mater J 2014; 33: 705-710.
• 26. http://www.gcamerica.com/lab/products/CERASMART/ GCA_CERASMART_Bro-iPad.pdf.
• 27. Vita-CAD-Temp-multiColor. Product Information. VITA, BadSäckingen, Germany. May 2014. https://www. vita-zahnfabrik.com/en/VITA-CAD-Temp-multiColor25330,27568,85241.html.
• 28. Telio CAD. Scientific Documentation. Ivoclar Vivadent AG, Schaan, Liechtenstein. April 2010. http://www. ivoclarvivadent.us/en-us/products/chairside-cad_camblocks/telio-cad.
• 29. Paradigm C. Technical Product Profile. St. Paul, MN: 3M ESPE. March 2006.