Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics

Salar Hashemi Nasab; Rojin Hamsian Etefagh; Arian Bazmi; Shahram Mahboubizadeh; Omid Ashkani; Yasemin Tabak

doi:10.29130/dubited.1686889

EN TR

Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics

Abstract

The advancement of Additive Manufacturing (AM) technologies, particularly Selective Laser Melting (SLM), has significantly influenced the development of orthopedic, dental, and spinal implants. This paper provides a comprehensive review of the role of SLM in enhancing the properties of implants, including biocompatibility, wear, fatigue and corrosion resistance. SLM offers significant advantages such as customization, design flexibility, and the ability to produce intricate geometries with precise porosity, which plays a critical role in osseointegration and bone regeneration. This paper examines various materials used in implant manufacturing, such as titanium alloys and Co-Cr-Mo alloys, and discusses their mechanical and tribological properties, emphasizing their suitability for use in load-bearing implants. Furthermore, the impact of surface texture, roughness, and porosity on the performance and longevity of implants is explored, highlighting how these factors influence mechanical properties, cell attachment, and overall integration with human tissue. In summary, SLM has emerged as a powerful method for producing orthopedic and dental implants with tailored mechanical properties, improved bioactivity, and enhanced biocompatibility, making it a promising tool for the future of implantable medical devices. In this study, 2D drawings and suggestions for further research have been provided to future researchers in various sections.

Keywords

Selective Laser Melting, Additive Manufacturing, Dental Implants, Orthopedic

Ethical Statement

This study does not involve human or animal participants. All procedures followed scientific and ethical principles, and all referenced studies are appropriately cited.

Thanks

The authors of this article express their gratitude to all authors who used their articles and hope that this article can play a useful role in the increasing the efficiency SLM technology

Ortopedik İmplantlardaki Gelişmeler: İnsan Protezlerinin Üretiminde Seçici Lazer Ergitme Teknolojisinin Kapsamlı Bir İncelemesi

Abstract

Katmanlı İmalat (Additive Manufacturing, AM) teknolojilerindeki gelişmeler, özellikle Seçici Lazer Ergitme (Selective Laser Melting, SLM) yöntemi, ortopedik, dental ve spinal implantların geliştirilmesinde önemli bir etki yaratmıştır. Bu makale, SLM teknolojisinin implantların biyouyumluluk, aşınma, yorulma ve korozyon direnci gibi özelliklerinin iyileştirilmesindeki rolünü kapsamlı bir şekilde incelemektedir. SLM, özelleştirilebilirlik, tasarım esnekliği ve karmaşık geometrilere sahip yapıların hassas gözeneklilikle üretilebilmesi gibi önemli avantajlar sunmaktadır. Bu özellikler, osseointegrasyon (kemik entegrasyonu) ve kemik rejenerasyonu açısından kritik öneme sahiptir. Makale, implant üretiminde kullanılan titanyum alaşımları ve Co-Cr-Mo alaşımları gibi çeşitli malzemeleri ele almakta ve bu malzemelerin mekanik ve tribolojik özelliklerini, yük taşıyan implant uygulamalarındaki uygunlukları bağlamında tartışmaktadır. Ayrıca, yüzey dokusu, pürüzlülük ve gözenekliliğin implantların performansı ve uzun ömürlülüğü üzerindeki etkisi irdelenmekte; bu faktörlerin mekanik özellikler, hücre tutunması ve insan dokusuyla bütünleşme üzerindeki rolü vurgulanmaktadır. Özetle, SLM, kişiselleştirilmiş mekanik özelliklere sahip, geliştirilmiş biyolojik etkinlik ve artırılmış biyouyumluluk sunan ortopedik ve dental implantların üretiminde güçlü bir yöntem olarak öne çıkmakta olup, implantlanabilir tıbbi cihazların geleceği açısından umut vadeden bir teknolojidir. Bu çalışmada, çeşitli bölümlerde gelecekteki araştırmacılara yönelik 2D çizimler ve ileri araştırma önerileri de sunulmuştur.

Keywords

seçici lazer ergitme, katmanlı imalat, dental implantlar, ortopedik

References

Abate, K. M., Nazir, A., & Jeng, J. Y. (2021). Design, optimization, and selective laser melting of vin tiles cellular structure-based hip implant. The International Journal of Advanced Manufacturing Technology, 112(7), 2037-2050. https://doi.org/10.1007/s00170-020-06323-5
Bartolomeu, F., Costa, M. M., Alves, N., Miranda, G., & Silva, F. S. (2020a). Additive manufacturing of NiTi-Ti6Al4V multi-material cellular structures targeting orthopedic implants. Optics and Lasers in Engineering, 134, Article 106208. https://doi.org/10.1016/j.optlaseng.2020.106208
Bartolomeu, F., Dourado, N., Pereira, F., Alves, N., Miranda, G., & Silva, F. S. (2020b). Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties. Materials Science and Engineering: C, 107, Article 110342. https://doi.org/10.1016/j.msec.2019.110342
Bram, M., Schiefer, H., Bogdanski, D., Köller, M., Buchkremer, H. P., & Stöver, D. (2006). Implant surgery: How bone bonds to PM titanium. Metal Powder Report, 61(2), 26-31. https://doi.org/10.1016/S0026-0657(06)70603-8
Chen, C., Hao, Y., Bai, X., Ni, J., Chung, S. M., Liu, F., & Lee, I. S. (2019). 3D printed porous Ti6Al4V cage: Effects of additive angle on surface properties and biocompatibility; bone ingrowth in Beagle tibia model. Materials & Design, 175, Article 107824. https://doi.org/10.1016/j.matdes.2019.107824
Cheng, K. J., Liu, Y. F., Wang, J. H., Wang, R., Xia, J., Xu, X., JiangX. F., & Dong, X. T. (2022). 3D-printed porous condylar prosthesis for temporomandibular joint replacement: Design and biomechanical analysis. Technology and Health Care, 30(4), 1017-1030. https://doi.org/10.3233/THC-213534
Cosma, S. C., Matei, S., Balc, N., & Leordean, D. (2014). Dental implants with lattice structure fabricated by selective laser melting. International Virtual Research Conference in Technical Disciplines, Slovakia, 2(1), 18-24.
de Souza Soares, F. M., Barbosa, D. M., Corado, H. P. R., de Carvalho Santana, A. I., & Elias, C. N. (2022). Surface morphology, roughness, and corrosion resistance of dental implants produced by additive manufacturing. Journal of Materials Research and Technology, 21, 3844-3855. https://doi.org/10.1016/j.jmrt.2022.10.114
Dong, X., Zhou, Y., Sun, Q., Qu, Y., Shi, H., Liu, W., Peng, H., Zhang, B., Xu, S., Yan, J., & Li, N. (2020). Fatigue behavior of biomedical Co–Cr–Mo–W alloy fabricated by selective laser melting. Materials Science and Engineering: A, 795, Article 140000. https://doi.org/10.1016/j.msea.2020.140000
Elsayed, M., Ghazy, M., Youssef, Y., & Essa, K. (2019). Optimization of SLM process parameters for Ti6Al4V medical implants. Rapid Prototyping Journal, 25(3), 433-447. https://doi.org/10.1108/RPJ-05-2018-0112

Esen, Z., & Bor, Ş. (2007). Processing of titanium foams using magnesium spacer particles. Scripta Materialia, 56(5), 341-344. https://doi.org/10.1016/j.scriptamat.2006.11.010
Fukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Pattanayak, D. K., & Nakamura, T. (2011). Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting. Acta Biomaterialia, 7(5), 2327-2336. https://doi.org/10.1016/j.actbio.2011.01.037
Ghosh, S., Abanteriba, S., Wong, S., & Houshyar, S. (2018). Selective laser melted titanium alloys for hip implant applications: Surface modification with new method of polymer grafting. Journal of the Mechanical Behavior of Biomedical Materials, 87, 312-324. https://doi.org/10.1016/j.jmbbm.2018.07.031
Götz, H. E., Müller, M., Emmel, A., Holzwarth, U., Erben, R. G., & Stangl, R. (2004). Effect of surface finish on the osseointegration of laser-treated titanium alloy implants. Biomaterials, 25(18), 4057-4064. https://doi.org/10.1016/j.biomaterials.2003.11.002
Han, W., Fang, S., Zhong, Q., & Qi, S. (2022). Influence of dental implant surface modifications on osseointegration and biofilm attachment. Coatings, 12(11), Article 1654. https://doi.org/10.3390/coatings12111654
Hyzy, S. L., Cheng, A., Cohen, D. J., Yatzkaier, G., Whitehead, A. J., Clohessy, R. M., Gittens, R. A., Boyan, B. D., & Schwartz, Z. (2016). Novel hydrophilic nanostructured microtexture on direct metal laser sintered Ti–6Al–4V surfaces enhances osteoblast response in vitro and osseointegration in a rabbit model. Journal of Biomedical Materials Research Part A, 104(8), 2086-2098. https://doi.org/10.1002/jbm.a.35739
Ji, F., Zhang, C., & Chen, X. (2018). Structure optimization of porous dental implant based on 3D printing. IOP Conference Series: Materials Science and Engineering, 324(1), Article 012060. https://doi.org/10.1088/1757-899X/324/1/0120
Kozakiewicz, M., Gmyrek, T., Zajdel, R., & Konieczny, B. (2021). Custom-made zirconium dioxide implants for craniofacial bone reconstruction. Materials, 14(4), Article 840. https://doi.org/10.3390/ma14040840
Kumar, P., Sawant, M. S., Jain, N. K., & Gupta, S. (2022). Study of mechanical characteristics of additively manufactured Co-Cr-Mo-2/4/6Ti alloys for knee implant material. CIRP Journal of Manufacturing Science and Technology, 39, 261-275. https://doi.org/10.1016/j.cirpj.2022.08.015
Leordean, D., Dudescu, C., Marcu, T., Berce, P., & Balc, N. (2015a). Customized implants with specific properties, made by selective laser melting. Rapid Prototyping Journal, 21(1), 98-104. https://doi.org/10.1108/RPJ-11-2012-0107
Leordean, D., Radu, S. A., Frățilă, D., & Berce, P. (2015b). Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM. The International Journal of Advanced Manufacturing Technology, 79(5), 905-920. https://doi.org/10.1007/s00170-015-6873-0
Lerebours, A., Demangel, C., Dembinski, L., Bouvier, S., Rassineux, A., & Egles, C. (2020). Effect of the residual porosity of CoCrMo bearing parts produced by additive manufacturing on wear of polyethylene. Biotribology, 23, Article 100138. https://doi.org/10.1016/j.biotri.2020.100138
Levy, H. A., Karamian, B. A., Yalla, G. R., Canseco, J. A., Vaccaro, A. R., & Kepler, C. K. (2023). Impact of surface roughness and bulk porosity on spinal interbody implants. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 111(2), 478-489. https://doi.org/10.1002/jbm.b.35161
Lin, C. Y., Wirtz, T., LaMarca, F., & Hollister, S. J. (2007). Structural and mechanical evaluations of a topology optimized titanium interbody fusion cage fabricated by selective laser melting process. Journal of Biomedical Materials Research Part A, 83A(2), 272-279. https://doi.org/10.1002/jbm.a.31231
Liu, Y., Rath, B., Tingart, M., & Eschweiler, J. (2020). Role of implants surface modification in osseointegration: A systematic review. Journal of Biomedical Materials Research Part A, 108(3), 470-484. https://doi.org/10.1002/jbm.a.36829
Lu, Y., Ren, L., Xu, X., Yang, Y., Wu, S., Luo, J., Y, M., Liud. L., Zhuanged D., Yang K.& Lin, J. (2018). Effect of Cu on microstructure, mechanical properties, corrosion resistance and cytotoxicity of CoCrW alloy fabricated by selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials, 81, 130-141. https://doi.org/10.1016/j.jmbbm.2018.02.026
Luo, L., Li, J., Lin, Z., Cheng, X., Wang, J., Wang, Y., & Huang, W. (2023). Anisotropic biomimetic trabecular porous three-dimensional-printed Ti-6Al-4V cage for lumbar interbody fusion. Materials & Design, 233, Article 112254. https://doi.org/10.1016/j.matdes.2023.112254
Mommaerts, M. Y., Depauw, P. R., & Nout, E. (2020). Ceramic 3D-printed titanium cranioplasty. Craniomaxillofacial Trauma & Reconstruction, 13(4), 329-333. https://doi.org/10.1177/1943387520927916
Mondal, P., Das, A., Wazeer, A., & Karmakar, A. (2022). Biomedical porous scaffold fabrication using additive manufacturing technique: porosity, surface roughness and process parameters optimization. International Journal of Lightweight Materials and Manufacture, 5(3), 384-396. https://doi.org/10.1016/j.ijlmm.2022.04.005
Mróz, A. B., Lapaj, L., Wisniewski, T., Skalski, K., & Leshchynsky, V. (2017). Friction and wear of the intervertebral disc endoprosthesis manufactured with use of selective laser melting process. Rapid Prototyping Journal, 23(6), 1032-1042. https://doi.org/10.1108/RPJ-11-2015-0171
Murchio, S. (2023). Hierarchical multifunctional cellular materials for implants with improved fatigue resistance and osteointegration [Doctoral dissertation, Università degli Studi di Trento]. https://doi.org/10.15168/11572_379289
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, DH.,& Wicker, Hasır, R.B. (2009). Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications. Journal of the Mechanical Behavior of Biomedical Materials, 2(1), 20-32. https://doi.org/10.1016/j.jmbbm.2008.05.004
Ni, J., Liu, F., Yang, G., Lee, G. H., Chung, S. M., Lee, I. S., & Chen, C. (2021). 3D-printed Ti6Al4V femoral component of knee: Improvements in wear and biological properties by AIP TiN and TiCrN coating. Journal of Materials Research and Technology, 14, 2322-2332. https://doi.org/10.1016/j.jmrt.2021.07.143
Pan, C. T., Lin, C. H., Huang, Y. S., Yang, T. L., Chen, S. Y., Ou, C. H., Chen, L. Y., Huang, J. C., Jang, J. S. C., Lin, H. K., & Lin, D. Y. (2017). Design of interbody fusion cages of Ti6Al4V with gradient porosity using a selective laser melting process for spinal fusion arthroplasty. Journal of Laser Micro/Nanoengineering, 12(1), 34-44. https://doi.org/10.2961/jlmn.2017.01.0007
Peng, W., Xu, L., You, J., Fang, L., & Zhang, Q. (2016). Selective laser melting of titanium alloy enables osseointegration of porous multi-rooted implants in a rabbit model. Biomedical Engineering Online, 15(1), 85. https://doi.org/10.1186/s12938-016-0207-9
Popovich, A., Sufiiarov, V., Polozov, I., Borisov, E., & Masaylo, D. (2016a). Producing hip implants of titanium alloys by additive manufacturing. International Journal of Bioprinting, 2(2), 78-84. https://doi.org/10.18063/IJB.2016.02.004
Popovich, A., Sufiiarov, V., Polozov, I., Borisov, E., & Masaylo, D. (2016b). Additive manufacturing of individual implants from titanium alloy. In Proceedings of the 25th Anniversary International Conference on Metallurgy and Materials (METAL 2016) (pp. 1504-1508).
Przekora, A., Kazimierczak, P., Wojcik, M., Chodorski, E., & Kropiwnicki, J. (2022). Mesh Ti6Al4V material manufactured by selective laser melting (SLM) as a promising intervertebral fusion cage. International Journal of Molecular Sciences, 23(7), Article 3985. https://doi.org/10.3390/ijms23073985
Revilla-León, M., Husain, N. A. H., Methani, M. M., & Özcan, M. (2021). Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys. The Journal of Prosthetic Dentistry, 125(5), 825-831. https://doi.org/10.1016/j.prosdent.2020.03.012
Rezayat, M., Ashkani, O., & Fadaei, R. (2024). Investigating surface integrity and mechanical behavior of selective laser melting for dental implants. Applied Research, 3(4), Article e202300126. https://doi.org/10.1002/appl.202300126
Roudnicka, M., Bigas, J., Molnarova, O., Palousek, D., & Vojtech, D. (2021). Different response of cast and 3D-printed Co-Cr-Mo alloy to heat treatment: A thorough microstructure characterization. Metals, 11(5), Article 687. https://doi.org/10.3390/met11050687
Shaoki, A., Xu, J. Y., Sun, H., Chen, X. S., Ouyang, J., Zhuang, X. M., & Deng, F. L. (2016). Osseointegration of three-dimensional designed titanium implants manufactured by selective laser melting. Biofabrication, 8(4), Article 045014. https://doi.org/10.1088/1758-5090/8/4/045014
Sharma, N., Ostas, D., Rotar, H., Brantner, P., & Thieringer, F. M. (2021). Design and additive manufacturing of a biomimetic customized cranial implant based on voronoi diagram. Frontiers in Physiology, 12, Article 647923. https://doi.org/10.3389/fphys.2021.647923
Sikavitsas, V. I., Temenoff, J. S., & Mikos, A. G. (2001). Biomaterials and bone mechanotransduction. Biomaterials, 22(19), 2581-2593. https://doi.org/10.1016/S0142-9612(01)00002-3
Singla, A. K., Banerjee, M., Sharma, A., Singh, J., Bansal, A., Gupta, M. K., Khanna, N., Shahi, A. S., & Goyal, D. K. (2021). Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments. Journal of Manufacturing Processes, 64, 161-187. https://doi.org/10.1016/j.jmapro.2021.01.009
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016). Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment. Materials Science and Engineering: C, 59, 690-701. https://doi.org/10.1016/j.msec.2015.10.069
Tsuang, F. Y., Li, M. J., Chu, P. H., Tsou, N. T., & Sun, J. S. (2023). Mechanical performance of porous biomimetic intervertebral body fusion devices: an in vitro biomechanical study. Journal of Orthopaedic Surgery and Research, 18(1), Article 71. https://doi.org/10.1186/s13018-023-03556-4
Van Hooreweder, B., Apers, Y., Lietaert, K., & Kruth, J. P. (2017). Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting. Acta Biomaterialia, 47, 193-202. https://doi.org/10.1016/j.actbio.2016.10.005
Vilhena, L. M., Shumayal, A., Ramalho, A., & Ferreira, J. A. M. (2020). Tribocorrosion behaviour of Ti6Al4V produced by selective laser melting for dental implants. Lubricants, 8(2), Article 22. https://doi.org/10.3390/lubricants8020022
Wally, Z. J., Haque, A. M., Feteira, A., Claeyssens, F., Goodall, R., & Reilly, G. C. (2019). Selective laser melting processed Ti6Al4V lattices with graded porosities for dental applications. Journal of the Mechanical Behavior of Biomedical Materials, 90, 20-29. https://doi.org/10.1016/j.jmbbm.2018.08.047
Wang, M., Wu, Y., Lu, S., Chen, T., Zhao, Y., Chen, H., & Tang, Z. (2016). Fabrication and characterization of selective laser melting printed Ti–6Al–4V alloys subjected to heat treatment for customized implants design. Progress in Natural Science: Materials International, 26(6), 671-677. https://doi.org/10.1016/j.pnsc.2016.12.006
Wu, S., Liu, X., Yeung, K. W., Liu, C., & Yang, X. (2014). Biomimetic porous scaffolds for bone tissue engineering. Materials Science and Engineering: R: Reports, 80, 1-36. https://doi.org/10.1016/j.mser.2014.04.001
Wysocki, B., Maj, P., Sitek, R., Buhagiar, J., Kurzydłowski, K. J., & Święszkowski, W. (2017). Laser and electron beam additive manufacturing methods of fabricating titanium bone implants. Applied Sciences, 7(7), Article 657. https://doi.org/10.3390/app7070657
Xiang, S., Yuan, Y., Zhang, C., & Chen, J. (2022). Effects of process parameters on the corrosion resistance and biocompatibility of Ti6Al4V parts fabricated by selective laser melting. ACS Omega, 7(7), 5954-5961. https://doi.org/10.1021/acsomega.1c06246
Xiong, Y., Gao, R., Zhang, H., & Li, X. (2019). Design and fabrication of a novel porous titanium dental implant with micro/nano surface. International Journal of Applied Electromagnetics and Mechanics, 59(3), 1097-1102. https://doi.org/10.3233/JAE-171166
Yan, C., Hao, L., Hussein, A., & Young, P. (2015). Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting. Journal of the Mechanical Behavior of Biomedical Materials, 51, 61-73. https://doi.org/10.1016/j.jmbbm.2015.06.024
Yang, H. J., & Oh, J. H. (2022). Reconstruction of mandibular contour defect using patient-specific titanium implant manufactured by selective laser melting method. Journal of Craniofacial Surgery, 33(7), 2055-2058. https://doi.org/10.1097/SCS.0000000000008513
Yoo, D. (2013). New paradigms in hierarchical porous scaffold design for tissue engineering. Materials Science and Engineering: C, 33(3), 1759-1772. https://doi.org/10.1016/j.msec.2012.12.092
Zaharin, H. A., Abdul Rani, A. M., Azam, F. I., Ginta, T. L., Sallih, N., Ahmad, A., Yunus, N. A., & Zulkifli, T. Z. A. (2018). Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds. Materials, 11(12), Article 2402. https://doi.org/10.3390/ma11122402
Zhang, L. C., & Attar, H. (2016). Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: A review. Advanced Engineering Materials, 18(4), 463-475. https://doi.org/10.1002/adem.201500419
Zhang, M., Yang, Y., Song, C., Bai, Y., & Xiao, Z. (2018). Effect of the heat treatment on corrosion and mechanical properties of CoCrMo alloys manufactured by selective laser melting. Rapid Prototyping Journal, 24(7), 1235-1244. https://doi.org/10.1108/RPJ-10-2017-0215
Zhao, B., Wang, H., Qiao, N., Wang, C., & Hu, M. (2017). Corrosion resistance characteristics of a Ti-6Al-4V alloy scaffold that is fabricated by electron beam melting and selective laser melting for implantation in vivo. Materials Science and Engineering: C, 70(1), 832-841. https://doi.org/10.1016/j.msec.2016.07.045
Zhou, H., & Fan, Q. (2017). 3D reconstruction and SLM survey for dental implants. Journal of Mechanics in Medicine and Biology, 17(03), Article 1750084. https://doi.org/10.1142/S0219519417500841
Zong, W., Zhang, S., Zhang, C., Ren, L., & Wang, Q. (2020). Design and characterization of selective laser‐melted Ti6Al4V–5Cu alloy for dental implants. Materials and Corrosion, 71(10), 1697-1710. https://doi.org/10.1002/maco.202011650

Details

Primary Language

English

Subjects

Material Design and Behaviors

Journal Section

Review

Authors

Salar Hashemi Nasab
0009-0009-8134-2857
Iran

Rojin Hamsian Etefagh
0009-0003-5978-4751
Iran

Arian Bazmi
0009-0004-3028-8735
Iran

Shahram Mahboubizadeh
0009-0001-4375-0325
Iran

Omid Ashkani
0000-0002-8319-6023
Iran

Yasemin Tabak ^*
0000-0002-4912-8828
Türkiye

Publication Date

October 30, 2025

Submission Date

April 30, 2025

Acceptance Date

August 21, 2025

Published in Issue

Year 2025 Volume: 13 Number: 4

DOI

https://doi.org/10.29130/dubited.1686889

IZ

https://izlik.org/JA93MN93EX

APA

Hashemi Nasab, S., Etefagh, R. H., Bazmi, A., Mahboubizadeh, S., Ashkani, O., & Tabak, Y. (2025). Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics. Duzce University Journal of Science and Technology, 13(4), 1643-1660. https://doi.org/10.29130/dubited.1686889

AMA

1.Hashemi Nasab S, Etefagh RH, Bazmi A, Mahboubizadeh S, Ashkani O, Tabak Y. Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics. DUBİTED. 2025;13(4):1643-1660. doi:10.29130/dubited.1686889

Chicago

Hashemi Nasab, Salar, Rojin Hamsian Etefagh, Arian Bazmi, Shahram Mahboubizadeh, Omid Ashkani, and Yasemin Tabak. 2025. “Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics”. Duzce University Journal of Science and Technology 13 (4): 1643-60. https://doi.org/10.29130/dubited.1686889.

EndNote

Hashemi Nasab S, Etefagh RH, Bazmi A, Mahboubizadeh S, Ashkani O, Tabak Y (October 1, 2025) Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics. Duzce University Journal of Science and Technology 13 4 1643–1660.

IEEE

[1]S. Hashemi Nasab, R. H. Etefagh, A. Bazmi, S. Mahboubizadeh, O. Ashkani, and Y. Tabak, “Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics”, DUBİTED, vol. 13, no. 4, pp. 1643–1660, Oct. 2025, doi: 10.29130/dubited.1686889.

ISNAD

Hashemi Nasab, Salar - Etefagh, Rojin Hamsian - Bazmi, Arian - Mahboubizadeh, Shahram - Ashkani, Omid - Tabak, Yasemin. “Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics”. Duzce University Journal of Science and Technology 13/4 (October 1, 2025): 1643-1660. https://doi.org/10.29130/dubited.1686889.

JAMA

1.Hashemi Nasab S, Etefagh RH, Bazmi A, Mahboubizadeh S, Ashkani O, Tabak Y. Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics. DUBİTED. 2025;13:1643–1660.

MLA

Hashemi Nasab, Salar, et al. “Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics”. Duzce University Journal of Science and Technology, vol. 13, no. 4, Oct. 2025, pp. 1643-60, doi:10.29130/dubited.1686889.

Vancouver

1.Salar Hashemi Nasab, Rojin Hamsian Etefagh, Arian Bazmi, Shahram Mahboubizadeh, Omid Ashkani, Yasemin Tabak. Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics. DUBİTED. 2025 Oct. 1;13(4):1643-60. doi:10.29130/dubited.1686889

Advancements in Orthopedic Implants: A Comprehensive Review of Selective Laser Melting Technology in Manufacturing Human Prosthetics

Abstract

Keywords

Ethical Statement

Thanks

Ortopedik İmplantlardaki Gelişmeler: İnsan Protezlerinin Üretiminde Seçici Lazer Ergitme Teknolojisinin Kapsamlı Bir İncelemesi

Abstract

Keywords

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite