Dalgıç Motorun Analitik, Sayısal, Performans Sonuçlarının Karşılaştırılması

Abstract

Asenkron motorlar endüstride en fazla kullanılan motorlardır. Bu motorların geometrik ve tasarımsal bazı özellikleri değiştirilerek kullanım alanları çeşitlilik göstermiştir. Bu uygulama alanlarından biri de tarımsal sulama uygulamalarıdır. Dalgıç motor olarak kullanılan asenkron motorların; küçük çap, paket boyu uzunluğu ve çalışma ortamların farklılık göstermesi temel tasarım parametrelerini (akım yoğunluğu, sıcaklık, vb.) değiştirmektedir. Bu çalışmada; ANSYS-Maxwell paket programı kullanılarak 75KW (100Hp) dalgıç asenkron motorun analitik (RMxprt), sonlu elemanlar çözümü Maxwell 2D kullanılarak gerçekleştirilmiştir. RMxprt ve Maxwell 2D’de elde edilen çözüm sonuçları deneysel veriler ile karşılaştırılmıştır.

Keywords

• Asenkron motor
• Dalgıç motor
• RMxprt
• Ansys Maxwell

Performance Comparison of Submersible Motor Based on Numerical and Analytical Results

Abstract

Induction machines are the most popular due to their wide range of use in industry. Some properties of geometric structures and the schematic structures of these motors changed, so it has varied uses of the motor. One of these applications are in agricultural irrigations. If it used as submersible motor, it has small diameter, stacking length and variety of working area, basic design parameters (current density, temperature, etc.) will be changed. In this study, 100Hp submersible motor has been done as finite elements methods (Ansys Maxwell 2D program) with help of analytical way (RMxprt). By this way, electrical and magnetic parameters and quantities have been calculated. The results of using RMxprt and Ansys-Maxwell and application have been explored and compared. 

Keywords

• Induction motor
• Submersible motor
• RMxprt
• Ansys Maxwell

References

1. İ. Tarımer Politeknik Der. 8(1) (2005) 19.
2. M. Çunkaş S.Ü. Müh.-Mim. Fak. Der. 27(4) (2012) 136.
3. Z. Ping, S. Scott, J. C. Zoltan, Dynamic modeling of three phase and single phase induction motor, International Conference IEMD'99, Electric Machines and Drives, Seattle-USA, (1999) 556.
4. A. Deshmukh, A. A. Bhole IJEET 5(9) (2014) 39.
5. M. Sundaram, P. Navaneethan American Journal of Applied Sciences 8(4) (2011) 393.
6. J. B. Danilevich, V. N. Antipov, I. Y. Kruchinina, Y. Khozikov, Design considerations of submersible unprotected solid-rotor induction motor, ICEM 18th International Conference on Electrical Machines, Vilamoura-Portugal, (2008) 1.
7. M. A. Choudhury, M. A. Rahman IEEE Transactions on Industry Applications 28(3) (1992) 680.
8. X. Yongming, M. Dawei, W. Jiabin, Numerical Calculation of End Leakage Reactance of Submersible Motor, ICEET'09 In Energy and Environment Technology, Guilin-China, (2009) 184.

9. H. Arabacı, O. Bilgin, A. Ürkmez, The Detection of Rotor Faults in the Manufacturing of Submersible Induction Motor, Int. Aegean Conference on Electrical Machines and Power Electronics (ACEMP '07), Bodrum-Turkey, (2007) 222.
10. L. Xin, H. Zhuo, W. Liguo, L. Linlin, X. Dianguo, Submersible Motor Rotor Bars Broken Fault Analysis Based on HHT, IEEE 7th International Power Electronics and Motion Control Conference, Harbin-China, (2012) 2398.
11. D. Meng, Y. Liu, Y. Xu, Q. Zhang, Analysis and Calculation of 3-D Temperature Field of Submersible Motor Rotor, Power and Energy Engineering Conference (APPEEC), Chengdu- Asia-Pacific, (2010) 1.
12. V.A. Gundale, M.S. Kulkarni International Journal of Engineering Research and Applications (IJERA) 2(1) (2012) 299.
13. Z. Bingyi, L. Bingxue, F. Guihong, Z. Fuyu, Research of multipolar permanent magnet synchronous submersible motor for screw pump, ICMA In Mechatronics and Automation, Harbin-China, (2007) 1011.
14. L. Jianjun, Z. Jibin, J. Xintong, F. Xinghe, Electrical-thermal Coupled Calculation of a Submersible Motor Used for Deep-sea Electromagnetic Propeller, 14th Biennial IEEE Conference on Electromagnetic Field Computation (CEFC), Chicago, USA, (2010) 1.
15. W. Jiabin, Y. Pan, Research of six-pole permanent magnet submersible motor design, 6th International Forum on Strategic Technology (IFOST), Harbin-China, (2011) 545.
16. S. F. Rabbi, M. A. Rahman, S. D. Butt, Modeling and operation of an interior permanent magnet motor drive for electric submersible pumps, IEEE In Oceans-St. John's, St. John's, Canada, (2014) 1.
17. Z. Bingyi, Z. Liu, H. Ding, K. Liu, G. Feng, Study on unit combination type direct-driven submersible permanent magnet motor, 17th Electrical Machines and Systems (ICEMS), Hangzhou-China, (2014) 3087.
18. B. Liu, XH. Bao, J. Liu, QL. Zhu, Insulation Life Prediction of High Voltage Submersible Motor Based on BP Neural Network, Int. Conference on Consumer Electronics Communications and Networks (CECNet), XianNing-China, (2011) 418.
19. I.A. Metwally, A. Gastli, M. Al-Sheikh Electric power systems research 77(8) (2007) 1065.
20. M. Cunkas, R. Akkaya, O. Bilgin, Torque optimization of submersible motors using evolutionary algorithms, Innovations in Intelligent Systems and Applications (INISTA), Istanbul-Turkey, (2011) 365.
21. M. Çunkaş, A. Ürkmez Gazi Üniv. Müh. Mim. Fak. Der. 23(3) (2008) 645.
22. Anonim, http://ansoft-maxwell.narod.ru/en/CompleteMaxwell2D_V12.pdf (Erişim tarihi: 01th of May, 2015).
23. A. Fenercioğlu, İ. Tarimer Selçuk Üniversitesi Teknik Bilimler Meslek Yüksekokulu Teknik-Online Der. 6(3) (2007) 221.
24. R. De Weerdt, R. Belmans, Squirrel cage induction motor end effects using 2D and 3D finite elements, Seventh International Conference, In Electrical Machines and Drives, Durham-England, (1995) 62.
25. Anonim, IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, IEEE Standard, 112, 1991.