Effect of Bentonite Nanoclay on Storage Stability of Elastomeric and Plastomeric Polymer Modified Bitumens

Year 2019, , 1187 - 1203, 31.07.2019

Erol İskender

https://doi.org/10.29130/dubited.511073

Cited By: 2

Abstract

Bentonit Nanokilinin Elastomerik ve Plastomerik Polimer Modifiye Bitümlerin Depolama Stabiliteleri Üzerindeki Etkisi

Abstract

Polimerlerin bitüm ile uyumu ve
modifikasyon süreci modifiye bitümün ve nihai asfalt karışımın özellikleri
üzerinde anahtar rol oynamaktadır. Bu çalışmanın amacı elastomer ve plastomer
türü polimer modifiye bitümler üzerinde bentonit nanokilinin etkisinin
morfolojik yönden araştırılmasıdır. Bu amaçla, SBS, SEBS, SIS elastomerleri ile
EVA ve EBA plastomerleri %5 oranında kullanılarak nanokil içermeyen ve %3
oranında nanokil içeren polimer modifiye bitümler hazırlanmıştır. Polimer
modifiye ve polimer/nanokil modifiye bitümlere depolama stabilitesi deneyi
yapıldıktan sonra örnekler optik mikroskop ve taramalı elektron mikroskobu
(SEM) yöntemleri ile değerlendirilmiştir. Nanokil kullanılarak elastomerik ve
plastomerik polimer modifiye bitümlerin depolama stabilitelerinin iyileştirilebileceği
görülmüştür.

Keywords

Elastomer, Plastomer, Polimer, Modifiye bitüm, Depolama stabilitesi, Nanokil, Morfoloji

References

• [1] J.S. Chen, M.-C. Liao and H.H. Tsai, “Evaluation and Optimization of the Engineering Properties of Polymer-Modified Asphalt,” Practical Failure Analysis, vol. 2, no. 3, pp. 75-83, 2002.
• [2] P. Cong, S. Chen and H. Chen, “Preparation and Properties of Bitumen Modified with the Maleic Anhydride Grafted Styrene-Butadiene-Styrene Triblock Copolymer,” Polymer Engineering and Science, vol. 51, no. 7, pp. 1273-1279, 2011.
• [3] X. Liu and S. Wu, “Study on the graphite and carbon fiber modified asphalt concrete,” Construction and Building Materials, vol. 25, no. 4, pp. 1807-1811, 2011.
• [4] J. Zhu, B. Birgisson and N.Kringos, “Polymer modification of bitumen: Advances and challenges,” European Polymer Journal, vol. 54, pp. 18-38, 2014.
• [5] B. Şengöz and G. Işıkyakar, “Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods,” Journal of Hazardous Materials, vol. 150, no. 2, pp. 424-432, 2008.
• [6] B. Sengoz, A. Topal and G. Isikyakar, “Morphology and image analysis of polymer modified bitumens,” Construction and Building Materials, vol. 23, no. 5, pp. 1986-1992, 2009.
• [7] N. Thakre, D. Mangrulkar, M. Janbandhu and J. Saxena, “Polymer Modified Bitumen,” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), vol. 13, no. 6, pp. 120-128, 2016.
• [8] Y. Becker, M.P. Méndez and Y. Rodríguez, “Polymer Modified Asphalt,” Vision Tecnologica, vol. 9, no. 1, pp. 39-50, 2001.
• [9] A.Topal “Evaluation of the properties and microstructure of plastomeric polymer modified bitumens,” Fuel Processing Technology, vol. 91, no. 1, pp. 45-51, 2010.
• [10] S. Bhargava, A.K. Raghuwanshi and P. Gupta, “Nanomaterial Compatibility and Effect on Properties of Base Bitumen Binder and Polymer Modified Bitumen,” IJISET - International Journal of Innovative Science, Engineering & Technology, vol. 3, no. 6, pp. 276-282, 2016.
• [11] X. Lu, P. Redelius and H.Soenen, “SBS modified bitumens: does their morphology and storage stability influence asphalt mix performance?” Proceedings of the 11th ISAP International Conference on Asphalt Pavements, Nagoya, Japan, 2010, pp. 1604-1613.
• [12] J.F. Masson, P. Collins, G. Robertson, J.R Woods and J. Margeson “Thermodynamics, Phase Diagrams, and Stability of Bitumen-Polymer Blends,” Energy & Fuels, vol. 17, no. 3, pp. 714-724, 2003.
• [13] H. Soenen, X. Lu and P. Redelius, “The Morphology of SBS Modified Bitumen in Binders and in Asphalt Mix,” The 7th International RILEM Symposium, Rhodes, Greece. 2009.
• [14] D. Sun, F. Ye, F. Shi and W. Lu, “Storage Stability of SBS-Modified Road Asphalt: Preparation, Morphology, and Rheological Properties,” Petroleum Science and Technology, vol. 24, no. 9, pp. 1067-1077, 2006.
• [15] E. İskender, “Asfalt Kaplamalarda Nanokil Uygulamaları,” Mühendislikte Güncel Konular, 1. Baskı, Ankara, Türkiye, Nobel Yayıncılık, 2018, ss. 309-326.
• [16] S. Zapién-Castillo, J. Rivera-Armenta, M. Chávez-Cinco, B. Salazar-Cruz and A. Mendoza-Martínez, “Physical and rheological properties of asphalt modified with SEBS/montmorillonite nanocomposite,” Construction and Building Materials, vol. 106, pp. 349–356, 2015.
• [17] J. Johnston and G. King, “Polymer Modified Asphalt Emulsions Composition, Uses, and Specifications for Surface Treatments,” Federal Highway Administration, Publication No. FHWA-CFL/TD-12-004, USA, 2012.
• [18] M. Stroup-Gardiner and D.E. Newcomb, “Polymer literature review,” St. Paul, Minnesota: Minnesota Department of Transportation, Report No.: MN/RC-95/27. 1995.
• [19] D. Lesueur, “The colloidal structure of bitumen: Consequences on the rheology and on the mechanisms of bitumen modification,” Advances in Colloid and Interface Science, vol. 145, no. 1-2, pp. 42-82, 2009.
• [20] M. Yılmaz, B.V. Kök, N. Kuloğlu ve T. Alataş, “Elastomer Türü Polimerler ile Modifiye Edilmiş Bitümlü Bağlayıcıların Depolama Stabilitelerinin ve Reolojik Özelliklerinin İncelenmesi”, DEÜ Mühendislik Fakültesi Fen ve Mühendislik Dergisi, c. 15, s. 1, ss. 67-77, 2013.
• [21] M. Yılmaz, B.V. Kök and Ö. Erdoğan Yamaç, “Determination of Rheological Properties of Polymer and Natural Asphalts Modified Binders After Storage Stability Test,” Journal of Engineering and Natural Sciences, Sigma, vol. 33, pp. 157-165, 2015.
• [22] Polymer Properties Database, (2018, 03 Ekim) Styrenic Block Copolymers (SBS, SIS, SEBS), Erişim: http://polymerdatabase.com/Elastomers/SBS-SIS.html.
• [23] Polymer Science Learning Center, (2018, 03 Ekim) SBS Rubber, Erişim: https://pslc.ws/macrog/sbs.html.
• [24] M.M. Eissa, S.H. Botros and A.F. Moustafa, “Triblock copolymers–modified SBR/EPDM rubber blends,” Journal of Elastomers & Plastics, vol. 50, no. 2, pp. 151-161, 2018.
• [25] K. Polat, I. Orujalipoor, S. İde and M. Şen, “Nano and microstructures of SEBS/PP/wax blend membranes: SAXS and WAXS analyses,” Journal of Polymer Engineering, vol. 35, no. 2, pp. 151-157, 2014.
• [26] M. A. Moyano, R. París and J.M. Martín-Martínez. “Changes in compatibility, tack and viscoelastic properties of ethylene n-butyl acrylate (EBA) copolymer–pentaerythritol rosin ester blend by adding microcrystalline wax Fischer–Tropsch wax and mixture of waxes,” International Journal of Adhesion and Adhesives, vol. 65, pp. 47-53, 2016.
• [27] G. Polacco, A. Muscente, D. Biondi and S. Santini, “Effect of composition on the properties of SEBS modified asphalts,” European Polymer Journal, vol. 42, no. 5, pp. 1113-1121, 2006.
• [28] U. Isacsson and X. Lu, “Characterization of bitumens modified with SEBS, EVA and EBA polymers,” Journal of Materials Science, vol. 34, no. 15, pp. 3737–3745, 1999.
• [29] C.F. Ouyang, S.F. Wang, Y. Zhang and Y.X. Zhang, “Preparation and properties of styrene–butadiene–styrene copolymer/kaolinite clay compound and asphalt modified with the compound,” Polymer Degradation and Stability, vol. 87, no. 2, pp. 309–317, 2005.
• [30] T.F. Pamplona, B.C. Amoni, A.E.V. Alencar, A.P.D. Lima, N.M.P.S. Ricardo, J.B. Soaresa and S.A. Soares, “Asphalt Binders Modified by SBS and SBS/Nanoclays: Effect on Rheological Properties,” Journal of the Brazilian Chemical Society, vol. 23, no. 4, pp. 639-647, 2012.
• [31] Z. Leng, Z. Tan, H. Yu and J. Guo, “Improvement of storage stability of SBS-modified asphalt with nanoclay using a new mixing method,” Road Materials and Pavement Design, pp. 1-14, 2018.
• [32] I. Puente-Lee, P.S. Schabes-Retchkiman, J.Rojas-García, L. Ríos-Guerrero and R. Herrera-Nájera, “Morphology of SBS–Modified Asphalt Using Low Vacuum SEM,” Microscopy and Microanalysis, vol. 9, no. 2, pp. 446-447, 2003.
• [33] Bitüm ve bitümlü bağlayıcılar - Modifiye bitümün depolama stabilitesinin belirlenmesi, Türk Standartları Enstitüsü, TS EN 13399, 2018.
• [34] Bitüm ve bitümlü bağlayıcılar-İğne batma derinliği tayini, Türk Standartları Enstitüsü, TS 118 EN 1426, 2015.
• [35] Bitüm ve bitümlü bağlayıcılar-Yumuşama noktası tayini-Halka ve bilye Yöntemi, Türk Standartları Enstitüsü, TS 120 EN 1427, 2015.