Three-phase Active Tracking AC-AC Voltage Regulator based on Buck Converter with an Efficient Hybrid Control Technique
Abstract
This study proposes a switch-mode three-phase active tracking AC-AC voltage regulator based on the buck converter. The regulator topology incorporates a moderate number of components with less complexity and high efficiency. An efficient hybrid control technique, based on a closed-loop PID controller that is supported with a new designed feedforward controller, is proposed for the regulator control different to the similar studies in the literature. The hybrid control technique augments the response of active tracking of the reference output phase voltages to achieve an improved quality close to sine-wave output phase voltages for either the input AC phase voltages that are ideal pure sine-wave or include various harmonics. The regulator topology has a modular structure for independent control of each output phase. So, the regulator can help to achieve close to sine-wave output phase voltages to supply a balanced/unbalanced wye-connected three-phase load or independent single-phase loads. The presented three-phase regulator and the control technique are tested with simulation and experimental studies. The laboratory set-up of the regulator is designed for 2.2 kW output power, 0-300 Vp input phase voltages (50 Hz), and 0-200 Vp output phase voltages. The results demonstrated that the proposed switch-mode three-phase buck-type active tracking voltage regulator can provide the desired AC phase voltages with less than 5% THD (total harmonic distortion) and low harmonics for different operating conditions.
Keywords
Buck converter, AC-AC regulator, Three-phase, Active tracking, THD
Thanks
References
- [1] J. You, D. M. Vilathgamuwa, N. Ghasemi, and B. Fu, “Virtual resistor-based integrated DC bus voltage conditioner for stability improvement of cascaded power converters,” IEEE Access, vol. 7, pp. 95959–95969, 2019.
- [2] J. Kaniewski, P. Szczesniak, M. Jarnut, and Z. Fedyczak, “Voltage conditioner and power flow controller based on bipolar matrix-reactance choppers,” Int. J. Elect. Power Energy Syst., vol. 94, pp. 256–266, 2018.
- [3] J. Kaniewski, “Three-phase AC/AC converter for voltage sag/swell compensator and phase shifter based on Cuk B2 matrix-reactance chopper,” Elect. Power Syst. Res., vol. 125, pp. 203–210, 2015.
- [4] J. Kaniewski, “Three-Phase voltage sag/swell compensator with phase shifter function based on bipolar matrix-reactance chopper,” Int. Symp. Power Electron. Elect. Dri. Automat. Motion (SPEEDAM), 2014, pp. 63–642.
- [5] S. Subramanian and M. K. Mishra, “Interphase AC-AC topology for voltage sag supporter,” IEEE Trans. Power Electron., vol. 25, no. 2, pp. 514–518, 2010.
- [6] D. M. Lee, T. G. Habetler, R. G. Harley, T. L. Keister, and J. R. Rostron, “A voltage sag supporter utilizing a PWM-switched autotransformer,” IEEE Trans. Power Electron., vol. 22, no. 2, pp. 626–635, 2007.
- [7] E. M. Molla and C. C. Kuo, “Voltage quality enhancement of grid-integrated PV system using battery-based dynamic voltage restorer,” Energies, vol. 13, no. 21, article number: 5742, 2020.
- [8] C. I. Chen, Y. C. Chen, C. H. Chen, and Y. R. Chang, “Voltage regulation using recurrent wavelet fuzzy neural network-based dynamic voltage restorer,” Energies, vol. 13, no. 23, article number: 6242, 2020.
- [9] P. L. S. Rodrigues, C. B. Jacobina, and N. B. De Freitas, “Single-phase universal active power filter based on ac-dc-ac converter with eight controlled switches,” IET Power Electron., vol. 12, no. 5, pp. 1131–1140, 2019.
- [10] N. B. De Freitas, C. B. Jacobina, B. S. Gehrke, and M. F. Cunha, “Transformer-based single-phase AC-DC-AC topology for grid issues mitigation,” IEEE Trans. Ind. Appl., vol. 55, no. 4, pp. 4001–4011, 2019.