Research Article
BibTex RIS Cite

Geleneksel bitümlü sıcak karışım üstyapı tabakalarının dinamik rijitlik modülünün tahmini ve marshall dizayn yöntemi verileriyle karşılaştırılması

Year 2022, Volume: 13 Issue: 2, 339 - 349, 28.06.2022
https://doi.org/10.24012/dumf.1075656

Abstract

Ülkemizde uygulanmaya çalışılan bitümlü sıcak karışımların mekanistik ve ampirik tasarım yönteminin, ikinci ve üçüncü seviye projeler için dinamik rijitliği modülün tahminine izin verilmiştir. Bitümlü sıcak karışım en önemli mekanik özelliklerinden biri olan dinamik rijitlik modülün ülkemizde yaygın olarak kullanılan Marshall dizaynı verileriyle ilişkisinin incelenmesinin tasarımcıların kaplama performansı ve yaşam döngü maliyetlerinin analizlerine katkıda bulunacağı düşünülmektedir. Bu çalışmada kalker taş ocağından üretilen agregayla bitümlü temel, binder, aşınma karışımlarının Marshall dizaynının bitüm değişimine göre belirlenen sıcaklık ve frekanslarda 1999 Witczak Modeliyle tahmin edilen dinamik rijitlik modüllerinin, dizayn verileriyle ilişkisi değerlendirilmiştir. Karışımların yükleme süresine göre dinamik modüllerinin değişiminin tespiti için optimum bitümde 21.1 oC referans sıcaklığında tabaka karışımlarının ana (master) eğrileri çizilmiştir. Karışımların tahmin edilen dinamik rijitlik modüllerinde maksimum dana boyutunun ve sıcaklık değişiminin daha etkili olduğu, proje içerisinde yükleme süresi değişimine göre üst yapı tabaka kalınlıklarında değişiklikler yapılabileceği ve bitümlü temel ve binder karışımlarında bir miktar bitüm azaltmasıyla optimum bitümde tahmin edilen dinamik modüle yaklaşıldığı tespit edilmiştir.

References

  • [1] Ceylan, H. Gopalakrıshnan, K. Kım, S. “Hot Mix Asphalt Dynamic Modulus Prediction Models Using Networks Approach” ANNs in Engineering Conference Missouri.10-14.2007
  • [2] Hou.H , Wang.T, Wu.S ,Xue.S ,Tan.R , Chen.J , Zhou.M “Investigation On The Pavement Performance Of Asphalt Mixture Based On Predicted Dynamic Modulus” Construction and Building Materials.11-17,2016
  • [3] Stephen.A, Cross. P, Determination of Dynamic Modulus Master Curves for Oklahoma HMA Mixtures” Final Report Oklahoma State University,1-5,2007
  • [4] Georgoul.K, Loizos.A, Plati.C “Calibration Of Dynamic Modulus Predictive Model” Construction and Building Materials ,66-68,2016
  • [5] S.Avcı,”Esnek Üstyapı Tasarım Yöntemlerinin AASHTO 2002 İle AASHTO 1993 Yöntemlerinin Karşılaştırılması “İTÜ Fen Bilimleri Enstitüsü Yüksek Lisans Tezi 10-23,2006
  • [6] AASHTO, Mechanistic–Empirical Pavement Design Guide , 10-27, 2008
  • [7] Clyne .T , Li.X,. Marasteanu.O,.Skok.E” Dynamıc And Resılıent Modulus Of Mn/Dot Asphalt Mıxtures” Final Report University of Minnesota Department of Civil Engineering ,2-5,2003
  • [8] Igw.A “Comparative Study of Asphalt Institute – Witczak 1-40D Dynamic Moduli for Polythene Bag Modified HMConcrete Using Predictive Models” - International Journal of Innovative Science, Engineering & Technology,47-50,2016.
  • [9] Mateosa .A, Soares.J” Validation Of A Dynamic Modulus Predictive Equation On The Basis Of Spanish Asphalt Concrete Mixtures” Materiales de Construcción,1-5,2015
  • [10] KGM,” Esnek Üstyapılar Projelendirme Rehberi”, Teknik Araştırmas Dairesi Üst Yapı Şübesi Müdürlüğü, 5-99,2008
  • [11] Nemati.R, Dave.E ” Nominal Property Based Predictive Models For Asphalt Mixture Complex Modulus (Dynamic Modulus And Phase Angle)” Construction and Building Materials,308-319,2018
  • [12] M Y.Huang “Pavement Analysis and Design” Second Edition ,307,2006
  • [13] Xıao.Y “Evaluatıon Of Engıneerıng Propertıes Of Hot Mıx Asphalt Concrete For The Mechanıstıc-Empırıcal Pavement Desıgn” Doctor hesis Department of Civil & Environmental Engineering Florida State University ,41-43,2009
  • [14] Garcia.G, Thompson.M ” HMA Dynamıc Modulus Predıctıve Models– A Revıew” Research Report FHWA-ICT-07-005 ,8-20,2007
  • [15] Jamrah.A “Lınear Vıscoelastıc Characterıstıcs of Mıchıgan Asphalt Mıxtures and the Effect Of Sample Sıze on Materıal Propertıes” Master Thesis Civil Engineering Michigan State University,8-17,2013
  • [16] Kim.Y Im.S, Ban.H” Layer Moduli of Nebraska Pavements for the New Mechanistic-Empirical Pavement Design Guide (MEPDG)” Report Research, University of Nebraska–Lincoln Nebraska Department of Roads,36-45,2010
  • [17] Yu.H, Shen.S “An Investıgatıon of Dynamıc Modulus and Flow Number Propertıes of Asphalt Mıxtures in Washıngton State” Final Report ,Departmant of Civil and Enviromental Engineering Washıngton State University,10-14,(2012)
  • [18] Yu.J” Modification of D Civil Engineeringynamic Modulus Predictive Models for Asphalt Mixtures Containing Recycled Asphalt Shingles ”Master Thesis Çivil Engineering Iowa State University,15-22,2012
  • [19] Kavussi.A , Solatifar.N, Abbasghorbani. M “Mechanistic-Empirical Analysis of Asphalt Dynamic Modulus for Rehabilitation Projects in Iran” Journal of Rehabilitation in Civil Engineering , 18-29,2016
  • [20] Karayolları Teknik Şartnamesi ,Karayolları Genel Müdürlüğü,407-443,2013
  • [21] Güngör. A, Sağlık. A, Orhan. F, Arıkan Öztürk. E” Polimer Modifiye Bitümlerin Superpave Performans Sınıflarının Belirlenmesi” 5. Ulusal Asfalt Srmpozyumu 2-8,2009
  • [22] Solatifar .N, Kavussi.A, Abbasghorbani.M, Katicha.S ”Development Of Dynamic Modulus Master Curves Of İn-Ser Karayolları teknik Şartnamesi (2013). 407-410.vice Asphalt Layers Using MEPDG Models” Road Materials and Pavement Design, 225-243,2019

Estimation of dynamic modulus of stiffness of conventional bituminous hot mix pavement layers and comparison with Marshall design method data

Year 2022, Volume: 13 Issue: 2, 339 - 349, 28.06.2022
https://doi.org/10.24012/dumf.1075656

Abstract

The mechanistic and empirical design method of bituminous hot mixes, which is tried to be applied in our country, is allowed to estimate the dynamic stiffness modulus for second and third level projects. It is thought that examining the relationship between the dynamic stiffness module, which is one of the most important mechanical properties of bituminous hot mix, and Marshall design data, which is widely used in our country, will contribute to the designers' analysis of coating performance and life cycle costs. In this study, the relationship of the dynamic stiffness modules estimated by the 1999 Witczak Model with the design data of the aggregate produced from the limestone quarry and the bituminous base, binder, abrasion mixtures at the temperatures and frequencies determined according to the bitumen change of Marshall design was evaluated. In order to determine the change of dynamic modulus of the mixtures according to the loading time, the master curves of the layer mixtures were drawn at the optimum bitumen reference temperature of 21.1 oC. It has been determined that the maximum grain size and temperature change are more effective in the estimated dynamic stiffness modules of the mixtures, changes can be made in the superstructure layer thicknesses according to the change in loading time within the project, and the dynamic modulus estimated in the optimum bitumen is approached with some bitumen reduction in bituminous foundation and binder mixtures.

References

  • [1] Ceylan, H. Gopalakrıshnan, K. Kım, S. “Hot Mix Asphalt Dynamic Modulus Prediction Models Using Networks Approach” ANNs in Engineering Conference Missouri.10-14.2007
  • [2] Hou.H , Wang.T, Wu.S ,Xue.S ,Tan.R , Chen.J , Zhou.M “Investigation On The Pavement Performance Of Asphalt Mixture Based On Predicted Dynamic Modulus” Construction and Building Materials.11-17,2016
  • [3] Stephen.A, Cross. P, Determination of Dynamic Modulus Master Curves for Oklahoma HMA Mixtures” Final Report Oklahoma State University,1-5,2007
  • [4] Georgoul.K, Loizos.A, Plati.C “Calibration Of Dynamic Modulus Predictive Model” Construction and Building Materials ,66-68,2016
  • [5] S.Avcı,”Esnek Üstyapı Tasarım Yöntemlerinin AASHTO 2002 İle AASHTO 1993 Yöntemlerinin Karşılaştırılması “İTÜ Fen Bilimleri Enstitüsü Yüksek Lisans Tezi 10-23,2006
  • [6] AASHTO, Mechanistic–Empirical Pavement Design Guide , 10-27, 2008
  • [7] Clyne .T , Li.X,. Marasteanu.O,.Skok.E” Dynamıc And Resılıent Modulus Of Mn/Dot Asphalt Mıxtures” Final Report University of Minnesota Department of Civil Engineering ,2-5,2003
  • [8] Igw.A “Comparative Study of Asphalt Institute – Witczak 1-40D Dynamic Moduli for Polythene Bag Modified HMConcrete Using Predictive Models” - International Journal of Innovative Science, Engineering & Technology,47-50,2016.
  • [9] Mateosa .A, Soares.J” Validation Of A Dynamic Modulus Predictive Equation On The Basis Of Spanish Asphalt Concrete Mixtures” Materiales de Construcción,1-5,2015
  • [10] KGM,” Esnek Üstyapılar Projelendirme Rehberi”, Teknik Araştırmas Dairesi Üst Yapı Şübesi Müdürlüğü, 5-99,2008
  • [11] Nemati.R, Dave.E ” Nominal Property Based Predictive Models For Asphalt Mixture Complex Modulus (Dynamic Modulus And Phase Angle)” Construction and Building Materials,308-319,2018
  • [12] M Y.Huang “Pavement Analysis and Design” Second Edition ,307,2006
  • [13] Xıao.Y “Evaluatıon Of Engıneerıng Propertıes Of Hot Mıx Asphalt Concrete For The Mechanıstıc-Empırıcal Pavement Desıgn” Doctor hesis Department of Civil & Environmental Engineering Florida State University ,41-43,2009
  • [14] Garcia.G, Thompson.M ” HMA Dynamıc Modulus Predıctıve Models– A Revıew” Research Report FHWA-ICT-07-005 ,8-20,2007
  • [15] Jamrah.A “Lınear Vıscoelastıc Characterıstıcs of Mıchıgan Asphalt Mıxtures and the Effect Of Sample Sıze on Materıal Propertıes” Master Thesis Civil Engineering Michigan State University,8-17,2013
  • [16] Kim.Y Im.S, Ban.H” Layer Moduli of Nebraska Pavements for the New Mechanistic-Empirical Pavement Design Guide (MEPDG)” Report Research, University of Nebraska–Lincoln Nebraska Department of Roads,36-45,2010
  • [17] Yu.H, Shen.S “An Investıgatıon of Dynamıc Modulus and Flow Number Propertıes of Asphalt Mıxtures in Washıngton State” Final Report ,Departmant of Civil and Enviromental Engineering Washıngton State University,10-14,(2012)
  • [18] Yu.J” Modification of D Civil Engineeringynamic Modulus Predictive Models for Asphalt Mixtures Containing Recycled Asphalt Shingles ”Master Thesis Çivil Engineering Iowa State University,15-22,2012
  • [19] Kavussi.A , Solatifar.N, Abbasghorbani. M “Mechanistic-Empirical Analysis of Asphalt Dynamic Modulus for Rehabilitation Projects in Iran” Journal of Rehabilitation in Civil Engineering , 18-29,2016
  • [20] Karayolları Teknik Şartnamesi ,Karayolları Genel Müdürlüğü,407-443,2013
  • [21] Güngör. A, Sağlık. A, Orhan. F, Arıkan Öztürk. E” Polimer Modifiye Bitümlerin Superpave Performans Sınıflarının Belirlenmesi” 5. Ulusal Asfalt Srmpozyumu 2-8,2009
  • [22] Solatifar .N, Kavussi.A, Abbasghorbani.M, Katicha.S ”Development Of Dynamic Modulus Master Curves Of İn-Ser Karayolları teknik Şartnamesi (2013). 407-410.vice Asphalt Layers Using MEPDG Models” Road Materials and Pavement Design, 225-243,2019
There are 22 citations in total.

Details

Primary Language Turkish
Journal Section Articles
Authors

İhsan GÜZEL 0000-0002-0746-070X

Ahmet BENLİ 0000-0002-3557-4704

Early Pub Date June 28, 2022
Publication Date June 28, 2022
Submission Date February 18, 2022
Published in Issue Year 2022 Volume: 13 Issue: 2

Cite

IEEE İ. GÜZEL and A. BENLİ, “Geleneksel bitümlü sıcak karışım üstyapı tabakalarının dinamik rijitlik modülünün tahmini ve marshall dizayn yöntemi verileriyle karşılaştırılması”, DUJE, vol. 13, no. 2, pp. 339–349, 2022, doi: 10.24012/dumf.1075656.
DUJE tarafından yayınlanan tüm makaleler, Creative Commons Atıf 4.0 Uluslararası Lisansı ile lisanslanmıştır. Bu, orijinal eser ve kaynağın uygun şekilde belirtilmesi koşuluyla, herkesin eseri kopyalamasına, yeniden dağıtmasına, yeniden düzenlemesine, iletmesine ve uyarlamasına izin verir. 24456