Purolite A200 Reçine Kullanılarak İyon Değiştirme Yöntemi ile Sudan Sülfat Giderimi

Year 2022, , 247 - 253, 31.03.2022

Muhammed Bora Akın , Zülal Hoşafcıoğlu Kıyısin , Mehmet Muhtar Kocakerim

https://doi.org/10.31590/ejosat.1080906

Abstract

Bu çalışmada, Purolite A200 reçinesi kullanılarak iyon değiştirme yöntemiyle sülfat giderimi araştırılmıştır. Çalışmada reçine miktarı, sıcaklık, çözeltinin başlangıç pH'ı, çözeltinin başlangıç sülfat konsantrasyonu ve karıştırma hızının etkisi parametre olarak seçilmiştir. Sonuç olarak sülfat gideriminde; başlangıç pH değerinin çok etkili olmadığı ancak sıcaklık, başlangıç sülfat konsantrasyonu, karıştırma hızı ve reçine miktarının etkili olduğu ve bu parametrelerin değerlerinin artmasıyla giderim veriminin arttığı görülmüştür. qm değeri -0.381, Langmuir katsayısı KL değeri -0.227 olarak bulunmuştur. Freundlich izotermi için Kf değeri 0,617, n katsayı değeri ise 0,705 olarak bulunmuştur. Bu sonuçlar, Langmuir izoterminin bu sistem için Freundlich izoterminden daha uygun bir adsorpsiyon izotermi olduğunu göstermiştir.

Keywords

Reçine, Prolite A200, Sülfat, İyon Değişim, Su

Sulfate Removal from Water by Ion Exchange Method Using Purolite A200 Resin

Abstract

In this study, sulfate removal by ion exchange method using Purolite A200 resin was investigated. In the study, the effect of resin amount, temperature, initial pH of the solution, initial sulfate concentration of the solution and mixing speed were selected as parameters. As a result, in sulfate removal; it was observed that the initial pH value was not very effective, but the temperature, initial sulfate concentration, mixing speed and resin amount were effective and the removal efficiency increased with the increase in the values of these parameters. The qm value was found as -0.381, while the Langmuir coefficient KL value was found as -0.227. For Freundlich isotherm, the Kf value was found to be 0.617, while the n coefficient value was found to be 0.705. These result was show that Langmuir isotherm was found to be a more suitable adsorption isotherm than Freundlich isotherm for this system.

Keywords

Resin, Prolite A200, Sulfate, Ion Exchange, Water

References

• Bertolacini R. J. and Barney, J. E. (1958). Ultraviolet Spectrophotometric Determination of Sulfate, Chloride, and Fluoride with Chloranilic Acid, Anal. Chem., 30(2), 202–205.
• Duranoglu, D. (2012). Sulfate removal from wastewater by chemical precipitation method, Journal of Engineering and Natural Sciences, 212, 39–55.
• EPA, Health Effects from Exposure to High Levels of Sulfate in Drinking Water Study. Environmental Protection, January 25th 1999.
• Guimarães, D. & Leão, V. A. (2014). Batch and fixed-bed assessment of sulphate removal by the weak base ion exchange resin Amberlyst A21, Journal of Hazardous Materials, 280, 209–215.
• MacKeown, H. Gyamfi, J. A. Delaporte, M. Schoutteten, K. V. K. M. Verdickt, L. Ouddane, B. & Criquet, J. (2021). Removal of disinfection by-product precursors by ion exchange resins, Journal of Environmental Chemical Engineering, 9(1), 104602.
• Öztürk, Y. & Ekmekçi, Z. (2020). Removal of sulfate ions from process water by ion exchange resins, Minerals Engineering, 159, 106613.
• Prolite A200 (2022) The Prolite website. Available: https://www.purolite.com/product/a200/
• Schubert, S. A. Clayton, J. W. and Fernando, Q. (1979). Determination of sulfite and sulfate in solids by time-resolved molecular emission spectrometry, Anal. Chem., 51(8), 1297–1301.
• Sezer, S. (1997). Atıksulardaki sülfat iyonlarının selülozlu ortamda çöktürülmesi, Master’s thesis, Yıldız Technical University, İstanbul.
• Silva, R. Cadorin L. & Rubio, J. (2010). Sulphate ions removal from an aqueous solution: I. Co-precipitation with hydrolysed aluminum-bearing salts, Minerals Engineering, 23(15), 1220–1226.
• Stefan, D. S. Frederick van Staden, J. Vasile, E. Vasile, O. R. & Dancila, M. (2014). Influence of sulfate and nitrate uptake from aqueous solutions on surface exchange in Purolite A-520E resin, Comptes Rendus Chimie, 17(7), 738–745.