Conference Paper

Valorisation of Dune Sand and Wase Brick Filler in Elaboration of Cellular Concrete: Mechanical and Thermal Properties

Number: Özel Sayı - Special Issue December 31, 2017
  • Damene Zineb
  • Goual Mohammed Sayah
  • Saiti Issam
TR EN

Valorisation of Dune Sand and Wase Brick Filler in Elaboration of Cellular Concrete: Mechanical and Thermal Properties

Abstract

The aim of this work is both to enhance the dune sand in the production of lightweight concrete with local resources, but also enhances the performance of the sandcrete by incorporating fines mineral as fines from waste of brick. Different parameters were studied, in which the quantity of substitution of fines in the dune sand, the proportions substitutions of lime in the cement, the dosage of expansive agent. The result shows that it is possible to producing lightweight concrete suited to the hot and arid environment with an acceptable heat insulation and sufficient compressive strength. The greatest introduced porosity and lowest density are reached from composition without lime and with 0.5 % Al. 

Keywords

References

  1. I. K. Cisse, M. Laquerbe. Mechanical characterization of filler sandcretes with rice husk ash additions : Study applied of Senegal. Cement and Concrete Research 30; 2000 ; 13-18.
  2. A. S. Al-Harthy, M. Abdelhalim, R. Taha, K. S. Aljabri. The properties of concrete made with fine dune sand. Construction and Building Material 21; 2007 ; 1803-1808.
  3. H. Wajahat, Mirza, Solman, I. Al- Noury. Utilisation of Saoudi sands for aerated concrete production. The International Journal of Cement and Composites and Lightweight Concrete. Volume 8, number 2; May 1986.
  4. N. Narayanan, K. Ramamurthy. Structure and properties of aerated concrete: a review. Cement & Concrete Composites 22 ; 2000 ; 321-329.
  5. R. Cabrillac, B. Fiorio, A. Liss Beaucour, H. Dumontet, S. Ortola. Experimental study of the mechanical anisotropy of aerated concretes and of the adjustment parameters of the introduced porosity. Construction and Building Materials 20 ; 2006 ; 286-295.
  6. Shrivastava OP. Lightweight concrete – a review. Indian Concrete Journal 51; 1977; 10-23.
  7. FC. McCormick. Rational proportioning of performed foam cellular concrete. ACI Material Journal 64 ; 1967 ; 104-109.
  8. C. Guegan, P. Legras, J.F. Mazzoleni, C. Colin, T. Breiner, N. Foussier. Mémento du béton cellulaire. Grouppe Eyrolle; 2005.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Conference Paper

Authors

Damene Zineb This is me
Türkiye

Goual Mohammed Sayah This is me

Saiti Issam This is me

Publication Date

December 31, 2017

Submission Date

August 28, 2017

Acceptance Date

December 31, 2017

Published in Issue

Year 2017 Number: Özel Sayı - Special Issue

APA
Zineb, D., Sayah, G. M., & Issam, S. (2017). Valorisation of Dune Sand and Wase Brick Filler in Elaboration of Cellular Concrete: Mechanical and Thermal Properties. Avrupa Bilim Ve Teknoloji Dergisi, Özel Sayı - Special Issue, 52-56. https://izlik.org/JA89NS82RM