Study on Factors Affecting CO2 Recovery of Fractured Pressure-sensitive Reservoirs

Year 2017, Issue: Özel Sayı - Special Issue, 22 - 25, 31.12.2017

Yueli Feng , Yuetian Liu Jie Dong Jian Chen Jianshu Huang

Abstract

The different deformation degree of fractures caused by the intrinsic strong pressure-sensitive property of the ultra-low permeability
reservoirs would change the channeling law of CO2 in fractures, then affect the oil displacement efficiency. Thus, revealing the
seepage characteristics of CO2 in fractured reservoirs is the groundwork to improve the oil displacement efficiency of CO2. The
directional pressure-sensitive property of fractures was simulated by a physical model. The simulation of physical experiment with
multi-physics coupling was carried out by theoretical derivation and finite element analysis software COMSOL Multiphysics. The
stronger heterogeneity of reservoirs , makes CO2 much easier to rush. Increasing injection pressure , can increase the proportion of
CO2 in low permeability area. As the pressure-sensitive property between high and low permeability layer is different, increasing the
effective stress would induce stronger heterogeneity. Therefore, in order to control the effect of pressure-sensitive property on
production，the formation pressure should be controlled reasonably in development process. In this study, the factors, especially the
fracture development directions, which show significant influence on the oil recovery of CO2 flooding in fractured and pressuresensitive reservoirs, were studied with physical experiments and numerical experiments. The results obtained in the study can provide
a more reliable theoretical basis for CO2 flooding design and profile control technology.

Keywords

CO2 flooding, pressure-sensitive, fracture direction

Thanks

The paper is sponsored by National Natural Science Foundation Project No. 51374222, National Major Project No. 2017ZX05032004-002, and The National Key Basic Research & Development Program No. 2015CB2509005.

Study on Factors Affecting CO2 Recovery of Fractured Pressure-sensitive Reservoirs

Abstract

The different deformation degree of fractures caused by the intrinsic strong pressure-sensitive property of the ultra-low permeability reservoirs would change the channeling law of CO₂ in fractures, then affect the oil displacement efficiency. Thus, revealing the seepage characteristics of CO₂ in fractured reservoirs is the groundwork to improve the oil displacement efficiency of CO₂. The directional pressure-sensitive property of fractures was simulated by a physical model. The simulation of physical experiment with multi-physics coupling was carried out by theoretical derivation and finite element analysis software COMSOL Multiphysics. The stronger heterogeneity of reservoirs , makes CO₂ much easier to rush. Increasing injection pressure , can increase the proportion of CO₂ in low permeability area. As the pressure-sensitive property between high and low permeability layer is different, increasing the effective stress would induce stronger heterogeneity. Therefore, in order to control the effect of pressure-sensitive property on production，the formation pressure should be controlled reasonably in development process. In this study, the factors, especially the fracture development directions, which show significant influence on the oil recovery of CO₂ flooding in fractured and pressure-sensitive reservoirs, were studied with physical experiments and numerical experiments. The results obtained in the study can provide a more reliable theoretical basis for CO₂ flooding design and profile control technology.

Keywords

CO2 flooding, pressure-sensitive, fracture direction

References

• Philippe Renard, Alain Genty, Fritz Stauffer. 2001. Laboratory determination of the full permeability tensor. Journal of geophysical research, vol.106, pages 26,442-452.DOI: 10.1029 / 2001 JB000243.
• Green Korn R A, Johnson C R. 1964. Directional permeability of heterogeneous anisotropic porous media. SPE J, 1964, 4 (2): 115-122. DOI: 10.2118/788-PA.
• Bernabé, Y. 1992. On the Measurement of Permeability in Anisotropic Rocks. International Geophysics, Volume 51, Pages 147–167. DOI: 10.1016/S0074-6142(08)62821-1.
• Bieber, R. L., P. Rasolofosaon, B. Zinszner, et al. 1996. Measurement and overall characterization of permeability anisotropy by tracer injection. Rev. Inst. Fr. Pet., 1996, 51(3): 332-347. DOI: 10.2516/ogst:1996028.
• Comsol , 2015. Multiphysics Model Library, Earth Science Module, Version 5.0.
• Mi, L., Jiang, H., Li, J., 2014a. The impact of diffusion type on multiscale discrete fracture model numerical simulation for shale gas. J. Nat. Gas Sci. Eng. 20, 74e81.DOI: 10.1016/j.jngse. 2014.06.013.
• Mi, L., Jiang, H., Li, J., Li, T., Tian, Y., 2014b. The investigation of fracture aperture effect on shale gas transport using discrete fracture model. J. Nat. Gas Sci. Eng.21, 631e635. DOI: 10.1016/j.jngse.2014.09.029.
• Chao Zhou, Xiaodong Wu, Hui Li, et al. 2015. Influence of In-situ Stress Distribution on Selection of Fracturing Fluid Backflow Technology(ICCESEN 2015), 14-19 October, 2015 Antalya-Turkey. DOI: 10.12693/APhysPolA.130.347.
• M.E. Başak, F. Kaçar. 2015. Ultra-Low Voltage VDCC Design by Using DTMOS(ICCESEN 2015), 14-19 October, 2015 Antalya-Turkey. DOI: 10.12693/APhysPolA.130.223.
• S. Gedik, A.F. Baytaş. 2014. Shielding of Gamma Radiation by Using Porous Materials (ICCESEN 2014), 25-29 October, 2014 Antalya-Turkey. DOI: 10.12693/APhysPolA.128.B-174.