Research Article
BibTex RIS Cite

Bir Tartım Otomasyonunda, Platform Tipi Yük Hücrelerinin, S-tipi Olarak Kullanılması

Year 2020, Ejosat Special Issue 2020 (ISMSIT), 221 - 227, 30.11.2020
https://doi.org/10.31590/ejosat.821620

Abstract

Tarımsal ürünlerin dayanımını artırma gayretlerinden birisi de kurutmadır. Ürünlerin kuruma karakteristiklerini incelemek için yapılan çalışmalarda kütle oldukça önemlidir. Bu çalışmada, kurutma denemeleri için tasarlanmış 3 numune kabına sahip, sıcak hava ile çalışan bir deneysel kurutucu sisteme otomatik tartım sistemi yapılmıştır. Kurutma makinelerinde kapların ağırlıklarını ölçmek için operatör sürekli belirli zaman aralıklarında kapları yerinden çıkartarak, tartıp tekrar yerine koymaktadır. Kurutma süresi, ürün çeşidi ve miktarına göre 72 saate kadar sürebilmektedir. Bu çalışmada, ürünlerin kütle kaybını ölçmedeki zorluklara çözüm getirmek amacıyla bir tartım otomasyonu gerçekleştirilmiştir. Üç hazneli kurutucu için üç adet yük hücresi kullanılarak ürünlerin kütlesi istenen zaman aralıklarında anlık olarak ölçülmüştür. Bu çalışmada Arduino Mega, HX711 24 bit ADC kartı ve kullanıcı ile etkileşim bileşenlerine sahip Nextion ekran kullanılmıştır. Askı tip yükleri ölçmede sıklıkla kullanılan S-tipi yük hücreleri yerine çubuk şeklinde platform tipi yük hücreleri kullanılmıştır. Daha ucuz olan platform tipi yük hücreleri, hazırlanan aparatlarla S tipi yük hücresine dönüştürülmüştür. Bu sayede platform tipi yük hücrelerinden daha duyarlı ve ucuz birer S tipi yük hücreleri elde edilmiştir. Yapılan testlerde ölçmeye ait önemli parametreler elde edilerek sistemin başarımı kanıtlanmıştır.

Supporting Institution

Gaziosmanpaşa Üniversitesi Bilimsel Araştırma Projeleri Birimi

Project Number

2020/09

Thanks

Bu çalışma Gaziosmanpaşa Üniversitesi Bilimsel Araştırma Projeleri Komisyonu tarafından desteklenmiştir. (Proje No: 2020/09).

References

  • Anton Satria Prabuwono, Habibullah Akbar, Wendi Usino. (2009). International Conference on Computer Engineering and Technology.
  • Yunho Kim, Hyungchul Kim ve Junghoon Lee. (2009). "Silicon-based capacitive load cell for tensile load measurement," Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS, Rome,pp. 410-415.
  • Jose S. Higino, Carlos Couto. (1995). Industrial Electronics, Control, and Instrumentation, Proceedings of the 1995 IEEE IECON 21st International Conference on. Volume: 2.
  • Holman. (1994). Experimental Methods for Engineers. Sixth Edition, McGraw-Hill publishers, New york.
  • D. Leea, H.P. Hongb, M.J. Leea, C.W. Park, N. K. Mina. (2012). A prototype high Sensitivity load cell using single walled carbon nanotube strain gauges, Sensors and Actuators A 180.
  • How to Measure Weight With Load Cell Sensors. (2020). Erişim adresi: https://dewesoft.com/daq/measure-weight-with-load-cell-sensors#what-is-load-cell.
  • Edmond Lou, V. James Raso, Nelson G. Durdle, ve Doug L. Hill. (1988). IEEE Transactions on Instrumentation and Measurement, VOL. 47, NO. 2, 1998.
  • J. G. Webster. (1988). Tactile Sensors for Robotics and Medicine, Wiley.
  • A. Qandil ve A. I. O. Zaid. (2015). "Considerations in the design and manufacturing of a load cell for measuring dynamic compressive loads," Power Generation System and Renewable Energy Technologies (PGSRET), Islamabad, pp. 1-6,
  • Ivan Muller, Renato Machado de Brito, Carlos Eduardo Pereira, ve Valner Brusamarello. (2010). Load Cells in Force Sensing Analysis – Theory and a Novel Application. IEEE Instrumentation & Measurement Magazine.
  • D. Crescini. (2012). "Load cell for dynamic force measurements: An example in Thick-Film Technology," IEEE International Instrumentation and Measurement Technology Conference Proceedings, Graz, pp. 2448-2453.
  • D. Atmajaya, N. Kurniati, W. Astuti, Y. Salim ve A. Haris. (2018). "Digital Scales System on Non-Organic Waste Types Based on Load Cell and ESP32," 2018 2nd East Indonesia Conference on Computer and Information Technology (EIConCIT), Makassar, Indonesia, pp. 1-4, doi: 10.1109/EIConCIT.2018.8878667.
  • N. Ge ve L. Xie. (2019). "High Precision Weight Measurement of Liquid Viscosity," 2019 International Conference on Electronic Engineering and Informatics (EEI), Nanjing, China, pp. 269-276, doi: 10.1109/EEI48997.2019.00066.
  • A. C. Bento. (2018). "An Experiment with Arduino Uno and Tft Nextion for Internet of Things," International Conference on Recent Innovations in Electrical, Electronics & Communication Engineering (ICRIEECE), Bhubaneswar, India, pp. 2138-2142, doi: 10.1109/ICRIEECE44171.2018.9008416.

The Use of Platform Type Load Cells as S-type in a Weighing Automation

Year 2020, Ejosat Special Issue 2020 (ISMSIT), 221 - 227, 30.11.2020
https://doi.org/10.31590/ejosat.821620

Abstract

One of the efforts to increase the strength of agricultural products is drying. Mass is very important in studies to examine the drying characteristics of products. In this study, an automatic weighing system was built on an experimental dryer system working with hot air with 3 sample containers designed for drying trials. In order to measure the weight of the containers in the drying machines, the operator removes the containers at certain time intervals, weighs them and puts them back into their place. Drying time takes up to 72 hours depending on the product type and quantity. In this study, a weighing automation was implemented in order to solve the difficulties in measuring the mass loss of products. By using a separate load cell for each container of the dryer, the mass of the test materials was measured instantaneously at the desired time intervals. In this study, Arduino Mega, HX711 24 bit ADC board and Nextion display with user interaction components are used. Instead of S-type load cells, which are frequently used to measure tensile forces, rod-shaped platform type load cells are used. The cheaper platform type load cells were transformed into S type load cells with the prepared apparatus. In this way, S-type load cells which are more sensitive and cheaper than platform type load cells were obtained. The performance of the system has been proven by obtaining important parameters of measurement in the tests.

Project Number

2020/09

References

  • Anton Satria Prabuwono, Habibullah Akbar, Wendi Usino. (2009). International Conference on Computer Engineering and Technology.
  • Yunho Kim, Hyungchul Kim ve Junghoon Lee. (2009). "Silicon-based capacitive load cell for tensile load measurement," Symposium on Design, Test, Integration & Packaging of MEMS/MOEMS, Rome,pp. 410-415.
  • Jose S. Higino, Carlos Couto. (1995). Industrial Electronics, Control, and Instrumentation, Proceedings of the 1995 IEEE IECON 21st International Conference on. Volume: 2.
  • Holman. (1994). Experimental Methods for Engineers. Sixth Edition, McGraw-Hill publishers, New york.
  • D. Leea, H.P. Hongb, M.J. Leea, C.W. Park, N. K. Mina. (2012). A prototype high Sensitivity load cell using single walled carbon nanotube strain gauges, Sensors and Actuators A 180.
  • How to Measure Weight With Load Cell Sensors. (2020). Erişim adresi: https://dewesoft.com/daq/measure-weight-with-load-cell-sensors#what-is-load-cell.
  • Edmond Lou, V. James Raso, Nelson G. Durdle, ve Doug L. Hill. (1988). IEEE Transactions on Instrumentation and Measurement, VOL. 47, NO. 2, 1998.
  • J. G. Webster. (1988). Tactile Sensors for Robotics and Medicine, Wiley.
  • A. Qandil ve A. I. O. Zaid. (2015). "Considerations in the design and manufacturing of a load cell for measuring dynamic compressive loads," Power Generation System and Renewable Energy Technologies (PGSRET), Islamabad, pp. 1-6,
  • Ivan Muller, Renato Machado de Brito, Carlos Eduardo Pereira, ve Valner Brusamarello. (2010). Load Cells in Force Sensing Analysis – Theory and a Novel Application. IEEE Instrumentation & Measurement Magazine.
  • D. Crescini. (2012). "Load cell for dynamic force measurements: An example in Thick-Film Technology," IEEE International Instrumentation and Measurement Technology Conference Proceedings, Graz, pp. 2448-2453.
  • D. Atmajaya, N. Kurniati, W. Astuti, Y. Salim ve A. Haris. (2018). "Digital Scales System on Non-Organic Waste Types Based on Load Cell and ESP32," 2018 2nd East Indonesia Conference on Computer and Information Technology (EIConCIT), Makassar, Indonesia, pp. 1-4, doi: 10.1109/EIConCIT.2018.8878667.
  • N. Ge ve L. Xie. (2019). "High Precision Weight Measurement of Liquid Viscosity," 2019 International Conference on Electronic Engineering and Informatics (EEI), Nanjing, China, pp. 269-276, doi: 10.1109/EEI48997.2019.00066.
  • A. C. Bento. (2018). "An Experiment with Arduino Uno and Tft Nextion for Internet of Things," International Conference on Recent Innovations in Electrical, Electronics & Communication Engineering (ICRIEECE), Bhubaneswar, India, pp. 2138-2142, doi: 10.1109/ICRIEECE44171.2018.9008416.
There are 14 citations in total.

Details

Primary Language Turkish
Subjects Engineering
Journal Section Articles
Authors

Ebubekir Yaşar 0000-0002-0780-893X

Project Number 2020/09
Publication Date November 30, 2020
Published in Issue Year 2020 Ejosat Special Issue 2020 (ISMSIT)

Cite

APA Yaşar, E. (2020). Bir Tartım Otomasyonunda, Platform Tipi Yük Hücrelerinin, S-tipi Olarak Kullanılması. Avrupa Bilim Ve Teknoloji Dergisi221-227. https://doi.org/10.31590/ejosat.821620