Bu çalışmada, farklı bant uygulamaları için tercih edilen basit yapılı bir polarizasyon dönüştürücünün tasarım ve simülasyon süreçleri gerçekleştirilmiştir. Önerilen polarizasyon dönüştürücü için FR-4 malzeme seçilmiş, metal yüzey bölümü ve metal sonlandırma için bakır malzeme tercih edilmiştir. Polarizasyon dönüştürücü için FR-4 malzeme seçilmiştir. Bu malzeme için kayıp tanjantı 0,025, dielektrik sabiti 4,3 ve kalınlığı 1,6 mm'dir. Çalışmanın simülasyonu, Computer Simulation Technique (CST) studio suite kullanılarak gerçekleştirilmiştir. Bu çalışma için seçilen frekans aralığı 4–16 GHz'dir. Simülasyon, frekans alanı çözücüsü dikkate alınarak gerçekleştirilmiştir.
In this study, design and simulation processes of a simple structure polarization converter preferred for different band applications were carried out. FR-4 material was selected for the middle part and copper material was preferred for the top and bottom (ground). FR-4 material has been selected for the polarization converter (PC). For this material, loss tangent is 0.025, dielectric constant is 4.3 and thickness is 1.6 mm. The simulation of the study was performed using a Computer Simulation Technique (CST) studio suite. Frequency range selected for this study is 4–16 GHz. The simulation was carried out taking into account the frequency-domain solver. Tetrahedral was selected as the mesh type. The aim of the proposed study is to implement a design with different polarization properties. Polarization conversion ratio (PCR) value for PC was found to be greater than 0.9, and it exhibited magnetic properties at all three frequencies where the PCR value was greater than 0.9. PCR value reached 0.99 in the X-band range. PC, which exhibits circular polarization in the C-band frequency range, was observed to have a 90 degree phase shift. Matlab program was preferred in evaluating the CST simulation results and interpreting the reflection coefficient, PCR, ellipticity (e) value, axial ratio (AR) and phase values.
| Primary Language | English |
|---|---|
| Subjects | Electrical Engineering (Other) |
| Journal Section | Research Article |
| Authors | |
| Submission Date | October 3, 2025 |
| Acceptance Date | November 25, 2025 |
| Publication Date | December 31, 2025 |
| DOI | https://doi.org/10.36222/ejt.1796186 |
| IZ | https://izlik.org/JA66EJ29BD |
| Published in Issue | Year 2025 Volume: 15 Issue: 2 |
All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.