Research Article
BibTex RIS Cite

Effects of Different Splicing Methods on Conveyor Belt Strength

Year 2022, Volume: 12 Issue: 1, 22 - 29, 30.06.2022
https://doi.org/10.36222/ejt.1086915

Abstract

Conveyor belts are mechanisms that provide continuous transfer of any product from one place to another. Belt conveyor systems are at the forefront of the systems that minimize the need for people in the transportation of materials. In this way, it is inevitable to achieve both time and cost savings. With the continuous development of today's technology, it develops in the improvements in belt conveyor systems. Owing to the innovations and improvements in the conveyor belts, it becomes possible to minimize the maintenance, repair and undesired stoppages of the facilities. In this study, specimens extracted from a conveyor belt with a width of 800 mm, with a tensile strength of 45 N/mm2, 4 layers of polyester-polyamide blend cord fabric, 6 mm rubber bottom coating thickness and 3 mm rubber top coating thickness were used. The specimens were taken in three different ways (from the unspliced belt, from the mechanically spliced belt and from the vulcanized belt). The specimens taken from the spliced conveyor belts were subjected to the tensile test. The strength values of the belt specimens, from high to low, are in the form of unspliced belt, vulcanized belt and mechanically spliced belt. Among these applications, it has been observed that the mechanical splicing method is easier in terms of application than other splicing methods. It has been observed that the time required for maintenance and repair of the mechanical splicing method is between 1 and 2 hours, and the time required for the splicing method with vulcanization is between 6 and 8 hours. It has been understood that the mechanical method is advantageous over the vulcanization method in terms of the application time of the belt splicing method.

References

  • [1] M., Hardygora, M., Bajda and R., Blazej, “Laboratory Testing of Conveyor Textile Belt Joints Used in Underground Mines,” Mining Science, vol. 22, pp.161-169, 2015.
  • [2] C. Chuen-Shii, L., Ching-Liang and C., Wei-Chung, “Optimum conditions for vulcanizing a fabric conveyor belt with better adhesive strength and less abrasion,” Materials & Design, vol. 44, pp.172-178, 2013.
  • [3] D. A., Şahbaz, Soğuk vulkanize yapıştırıcı üretimi ve uygulama koşullarının değerlendirilmesi. Doktara Tezi, Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Enstitüsü, Bilecik. 2017.
  • [4] Çankır, K. Lastik konveyör bantlarının ekleme yöntemleri ve teknik ayrıntıları. Yüksek Lisans Tezi, Mustafa Kemal Üniversitesi Fen Bilimleri Enstitüsü, Antakya, 2006.
  • [5] B., Soyubel, Elastomerlerin statik ve dinamik özelliklerinin incelenmesi. Yüksek Lisans Tezi, Uludağ Üniversitesi Fen Bilimleri Enstitüsü, Bursa, 2006.
  • [6] E. Öztürk, Farklı kauçuk karışımlarının vulkanizasyonuna hızlandırıcıların etkisi. Yüksek Lisans Tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, Sakarya. 2008.
  • [7] Vahapoğlu, V. Kauçuk türü malzemeler 1. doğal kauçuk. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, vol. 3.1 pp. 57-70, 2007.
  • [8] TS ISO 37. Lastikler ve Termoplastikler – Çekme gerilmesi-uzama özelliklerinin tayini, T.S.E., Ankara, 2017.
  • [9] TS EN ISO 1120. Konveyör bantları-Mekanik bağlantıların dayanımının belirlenmesi-Statik deney metodu. T.S.E., Ankara, 2013.
  • [10] ISO 18573. Konveyör bantları - Test atmosferleri ve koşullandırma süreleri, 2012.
  • [11] MEGEP, Konveyör Bakımı. Metalurji Teknolojisi, Ankara, 2011.
  • [12] İ., Uğur, Transport Tekniği Ders Notları. İstanbul Teknik Üniversitesi Maden Mühendisliği Bölümü, İstanbul, 2010.
  • [13] Labris Maden ve Makina Sanayi A.Ş. Ürün kataloğu, 2021. http://www.labris.com.tr/images/urunler/f4bccc422b85ef42.pdf
  • [14] R., Kessentini, O., Klinkova, I., Tawfiq and M., Haddar, “Modeling the moisture diffusion and hygroscopic swelling of a textile reinforced conveyor belt,” Polymer Testing, vol. 75, pp. 159-166, 2019.
  • [15] TS EN ISO 283. Tekstil konveyör bantları-Tam kalınlıkta çekme mukavemeti, kopma uzaması ve referans yükte uzama- Deney metodu. T.S.E., Ankara, 2016.
Year 2022, Volume: 12 Issue: 1, 22 - 29, 30.06.2022
https://doi.org/10.36222/ejt.1086915

Abstract

References

  • [1] M., Hardygora, M., Bajda and R., Blazej, “Laboratory Testing of Conveyor Textile Belt Joints Used in Underground Mines,” Mining Science, vol. 22, pp.161-169, 2015.
  • [2] C. Chuen-Shii, L., Ching-Liang and C., Wei-Chung, “Optimum conditions for vulcanizing a fabric conveyor belt with better adhesive strength and less abrasion,” Materials & Design, vol. 44, pp.172-178, 2013.
  • [3] D. A., Şahbaz, Soğuk vulkanize yapıştırıcı üretimi ve uygulama koşullarının değerlendirilmesi. Doktara Tezi, Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Enstitüsü, Bilecik. 2017.
  • [4] Çankır, K. Lastik konveyör bantlarının ekleme yöntemleri ve teknik ayrıntıları. Yüksek Lisans Tezi, Mustafa Kemal Üniversitesi Fen Bilimleri Enstitüsü, Antakya, 2006.
  • [5] B., Soyubel, Elastomerlerin statik ve dinamik özelliklerinin incelenmesi. Yüksek Lisans Tezi, Uludağ Üniversitesi Fen Bilimleri Enstitüsü, Bursa, 2006.
  • [6] E. Öztürk, Farklı kauçuk karışımlarının vulkanizasyonuna hızlandırıcıların etkisi. Yüksek Lisans Tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, Sakarya. 2008.
  • [7] Vahapoğlu, V. Kauçuk türü malzemeler 1. doğal kauçuk. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, vol. 3.1 pp. 57-70, 2007.
  • [8] TS ISO 37. Lastikler ve Termoplastikler – Çekme gerilmesi-uzama özelliklerinin tayini, T.S.E., Ankara, 2017.
  • [9] TS EN ISO 1120. Konveyör bantları-Mekanik bağlantıların dayanımının belirlenmesi-Statik deney metodu. T.S.E., Ankara, 2013.
  • [10] ISO 18573. Konveyör bantları - Test atmosferleri ve koşullandırma süreleri, 2012.
  • [11] MEGEP, Konveyör Bakımı. Metalurji Teknolojisi, Ankara, 2011.
  • [12] İ., Uğur, Transport Tekniği Ders Notları. İstanbul Teknik Üniversitesi Maden Mühendisliği Bölümü, İstanbul, 2010.
  • [13] Labris Maden ve Makina Sanayi A.Ş. Ürün kataloğu, 2021. http://www.labris.com.tr/images/urunler/f4bccc422b85ef42.pdf
  • [14] R., Kessentini, O., Klinkova, I., Tawfiq and M., Haddar, “Modeling the moisture diffusion and hygroscopic swelling of a textile reinforced conveyor belt,” Polymer Testing, vol. 75, pp. 159-166, 2019.
  • [15] TS EN ISO 283. Tekstil konveyör bantları-Tam kalınlıkta çekme mukavemeti, kopma uzaması ve referans yükte uzama- Deney metodu. T.S.E., Ankara, 2016.
There are 15 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Research Article
Authors

Savaş Kirenli 0000-0002-2370-6212

Recep Demirsöz 0000-0003-0674-4572

Publication Date June 30, 2022
Published in Issue Year 2022 Volume: 12 Issue: 1

Cite

APA Kirenli, S., & Demirsöz, R. (2022). Effects of Different Splicing Methods on Conveyor Belt Strength. European Journal of Technique (EJT), 12(1), 22-29. https://doi.org/10.36222/ejt.1086915

All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı