The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic

M. Özyurt; B. Söyler

TR EN

Kimyasal Ankrajlarin Çekme Yükleri Altindaki Davranisinin Bulanik Mantik ile Modellenmesi

Abstract

Depremde hasar alan betonarme yapi elemaninin en kesitinin büyütülmesi halinde mevcut beton ile yeni dökülen betonun birlikte tek parça olarak çalismasi gerekir. Bu amaçla kuvvet aktarma islemini gerçeklestiren ankrajlardan faydalanilir.Bu çalismada farkli dayanimlara sahip betonlara sonradan ekilen ,degisik çap ve boyuttaki ankrajlarin deplasman ve tasima kapasiteleri arasinda bulanik mantik modeli olusturulmustur.Bulanik mantik modelinin olusturulmasinda kullanilan giris ve çikis parametreleri ve olusturulan kural tabaninda konu ile ilgili olarak yapilan deneysel çalismalardan faydalanilmistir.

Keywords

Bulanik Mantik, Ankraj,Deplasman,Yük Tasima Kapasitesi

Details

Primary Language

English

Subjects

-

Journal Section

-

Authors

M. Özyurt This is me

B. Söyler This is me

Publication Date

August 1, 2006

Submission Date

August 1, 2006

Acceptance Date

-

Published in Issue

Year 2006 Volume: 2 Number: 2

IZ

https://izlik.org/JA38HY88YM

Cite

RIS / Bibtex

APA

Özyurt, M., & Söyler, B. (2006). The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic. Electronic Letters on Science and Engineering, 2(2), 59-63. https://izlik.org/JA38HY88YM

AMA

1.Özyurt M, Söyler B. The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic. Electronic Letters on Science and Engineering. 2006;2(2):59-63. https://izlik.org/JA38HY88YM

Chicago

Özyurt, M., and B. Söyler. 2006. “The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic”. Electronic Letters on Science and Engineering 2 (2): 59-63. https://izlik.org/JA38HY88YM.

EndNote

Özyurt M, Söyler B (August 1, 2006) The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic. Electronic Letters on Science and Engineering 2 2 59–63.

IEEE

[1]M. Özyurt and B. Söyler, “The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic”, Electronic Letters on Science and Engineering, vol. 2, no. 2, pp. 59–63, Aug. 2006, [Online]. Available: https://izlik.org/JA38HY88YM

ISNAD

Özyurt, M. - Söyler, B. “The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic”. Electronic Letters on Science and Engineering 2/2 (August 1, 2006): 59-63. https://izlik.org/JA38HY88YM.

JAMA

1.Özyurt M, Söyler B. The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic. Electronic Letters on Science and Engineering. 2006;2:59–63.

MLA

Özyurt, M., and B. Söyler. “The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic”. Electronic Letters on Science and Engineering, vol. 2, no. 2, Aug. 2006, pp. 59-63, https://izlik.org/JA38HY88YM.

Vancouver

1.M. Özyurt, B. Söyler. The Modeling of The Behavior of Chemical Anchor Bolts Under Tension Loads Through Fuzzy Logic. Electronic Letters on Science and Engineering [Internet]. 2006 Aug. 1;2(2):59-63. Available from: https://izlik.org/JA38HY88YM