Pre-irradiation grafting of acrylic acid and sodium styrene sulfonate on non-woven polyethylene fabric for heavy metal removal

Year 2021, Volume: 4 Issue: 1, 63 - 72, 31.03.2021

Nazia Rahman , Md. Imran Biswas Mahbub Kabir Nirmal Chandra Dafader Shahnaz Sultana Md. Nabul Sardar Farah Tasneem Ahmed Abdul Halim

https://doi.org/10.35208/ert.828089

Cited By: 4

Abstract

In present study acrylic acid (AAc) and sodium styrene sulfonate (SSS) were grafted onto non-woven polyethylene fabric using pre-irradiation method and the grafted adsorbent is employed for Cr(III) and Pb(II) adsorption. After irradiation of the non-woven polyethylene fabrics with 50 kGy radiation dose the grafting reaction was carried out at 80º C with monomer solution consisted of 30% AAc, 10% SSS and 4% NaCl in water. A high graft yield of 270% was achieved. Fourier Transform Infrared, Scanning Electron Microscopy and Thermo-gravimetric Analysis were used to analyze the adsorbent. Pb (II) and Cr (III) adsorption from synthetic aqueous solution was attempted by the grafted adsorbent. Adsorption study was accomplished by changing the contact time, pH and initial metal ion concentration. Contact time 48 h and initial metal concentration 1000 ppm were found optimum for all the metal ions studied. pH 6.2 and 5 was observed best for Pb (II) and Cr(III) adsorption respectively. Kinetic adsorption data fitted better with pseudo-second-order equation than pseudo-first-order. Good correlation of experimental data with Langmuir isotherm model suggested monolayer adsorption. Langmuir equation showed that the maximum adsorption capacity for Pb (II) was 38.46 mg g-1 and Cr (III) was 111.11 mg g-1. Experiment on desorption of metal ions and reuse of the adsorbent depicted good results. Adsorbent also showed efficient adsorption of Cr(III) from real waste water. From all the findings it can be expected that the AAc-SSS grafted PE fabric can successfully eliminate Cr(III) and Pb(II) from industrial waste water.

Keywords

Heavy metal, acrylic acid, sodium styrene sulfonate, adsorption, wastewater

References

• [1]. S. Zhai, H. Xiao, Y. Shu, and Z. Zhao, “Countermeasures of heavy metal pollution”, Chinese Journal of Geochemistry, Vol. 32(4), pp. 446-450, 2013.
• [2]. N. Seko, M. Tamada, and F. Yoshii F, “Current status of adsorbent for metal ions with radiation grafting and crosslinking techniques”, Nuclear Instruments and Methods in Physics Research Section B, Vol. 236, pp.21–29, 2005.
• [3]. M. M. Marjub, N. Rahman, N.C. Dafader, F.S. Tuhen, S. Sultana, and F.T. Ahmed, “Acrylic acid-chitosan blend hydrogel: a novel polymer adsorbent for adsorption of lead(II) and copper(II) ions from wastewater”, Journal of Polymer Engineering, Vol. 39(10), pp. 883–891, 2019.
• [4]. H. Shrivastava, And B.U. Nair, “Protein Degradation by Peroxide Catalyzed by Chromium (III): Role of Coordinated Ligand”, Biochemical and Biophysical Research Communications, Vol. 270(3), pp. 749-754, 2000.
• [5]. S. Tong S, Y.E. von Schirnding, and T. Prapamontol T, “Environmental lead exposure: a public health problem of global dimensions”, . Bulletin of World Health Organization, Vol. 78 (9), pp. 1068-1077, 2000.
• [6]. S. Madala, S.K. Nadavala, S. Vudagandla, V.M. Boddu, and K. Abburi, “Equilibrium, kinetics and thermodynamics of Cadmium (II) biosorption on to composite chitosan biosorbent”, Arabian Journal of Chemistry, Vol. 10, pp. S1883–S1893, 2017.
• [7]. J. Peric, M. Trgo, and N.V. Medvidovic, “Removal of zinc, copper and lead by natural zeolite—a comparison of adsorption isotherms”, Water Research, Vol. 38, pp. 1893–1899, 2004.
• [8]. D. Balarak, Y. Mahdavi, E. Bazrafshan, A.H. Mahvi, and Y. Esfandyari, “Adsorption of fluoride from aqueous solutions by carbon nano- tubes: determination of equilibrium, kinetic, and thermodynamic parameters”, Fluoride, Vol. 49(1), pp. 71–83, 2016.
• [9]. E. Bazrafshan, A.A. Zarei, and F.K. Mostafapour, “Biosorption of cadmium from aqueous solutions by Trichoderma fungus: kinetic, thermodynamic, and equilibrium study”, Desalination and Water Treatment, Vol. 57(31), pp. 14598–14608, 2016.
• [10]. E. Bazrafshan, F. Kord Mostafapour, S. Rahdar, A.H. Mahvi, “Equilibrium and thermodynamics studies for decolorization of re- active black 5 (RB5) by adsorption onto MWCNTs”, Desalination and Water Treatment, Vol. 54(8), pp. 2241–2251, 2015.
• [11]. E. Bazrafshan, M. Ahmadabadi, and A.H. Mahvi, “Reactive Red-120 removal by activated carbon obtained from cumin herb wastes”, Fresenius Environmental Bulletin, Vol. 22(2a), pp. 584–590, 2013.
• [12]. E. Bazrafshan, P. Amirian, and A.H. Mahvi, and A. Ansari-Moghaddam, “Application of adsorption process for phenolic compounds removal from aqueous environments: a systematic review”, Global NEST Journal, Vol. 18(1), pp. 146–63, 2016.
• [13]. E. Bazrafshan, F. Kord Mostafapour and A.H. Mahvi, “Phenol removal from aqueous solutions using pistachio-nut shell ash as a low cost adsorbent”, Fresenius Environmental Bulletin, Vol. 21(10), pp. 2962–2968, 2012.
• [14]. E. Bazrafshan, D. Balarak, A.H. Panahi, H. Kamani, and A.H. Mahvi, “Fluoride removal from aqueous solutions by cupric oxide nanoparticles”. Fluoride, Vol. 49(3), pp. 233–44, 2016.
• [15]. R. Coşkun, and C. Soykan, “Lead(II) adsorption from aqueous solution by poly(ethylene terephthalate)-g-acrylamide fibers”, Journal of Polymer Research, Vol. 13, pp. 1–8, 2006.
• [16]. H. Băg, A.R. Türker, R. Coşkun, M. Saçak, and M. Yiğitoğlu, “Determination of zinc, cadium, cobalt and nickel by flame atomic absorption spectrometry after preconcentration by polyethylene terephthalate/ fibers grafted with methacrylic acid”. Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 55, pp. 1101–8, 2000.
• [17]. O. Bozkaya, M. Yiğitoğlu, and M. Arslan, “Investigation on selective adsorption of Hg(II) ions using 4-vinyl pyridine grafted poly(ethylene terephthalate) fiber” Journal of Applied Polymer Science, Vol. 124, pp. 1256–64, 2012.
• [18]. R. Çoşkun, C. Soykan, and M. Saçak, “Adsorption of copper(II), nickel(II) and cobalt(II) ions from aqueous solution by methacrylic acid/ acrylamide monomer mixture grafted poly(ethylene terephthalate) fiber”, Separation and Purification Technology, Vol. 49, pp. 107–114, 2006.
• [19]. R. Coşkun, C. Soykan, and M. Saçak, “Removal of some heavy metal ions from aqueous solution by adsorption using poly(ethylene terephthalate)-g-itaconic acid/acrylamide fiber”, Reactive and Functional Polymers, Vol. 66, pp. 599–608, 2006.
• [20]. M. Arslan, “Preparation and use of amine-functionalized glycidyl methacrylate-g-poly(ethylene terephthalate) fibers for removal of chromium(VI) from aqueous solution” Fibers and Polymers, Vol. 11, pp. 325– 330, 2010.
• [21]. M. Yiğitoğlu, and M. Arslan, “Adsorption of hexavalent chromium from aqueous solutions using 4-vinyl pyridine grafted poly(ethylene terephthalate) fibers”, Polymer Bulletin, Vol. 55, pp. 259–268, 2005.
• [22]. M. Yiğitoğlu, and M. Arslan, Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4- vinly pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiber. Journal of Hazardous Materials, Vol. 166, pp. 435–444, 2009.
• [23]. M. Karakısla, “The adsorption of Cu(II) ion from aqueous solution upon acrylic acid grafted poly(ethylene terephthalate) fibers”. Journal of Applied Polymer Science, Vol. 87, pp. 1216–1220, 2003.
• [24]. H. Hamada, A. Razik, and ER Kenawy, “Synthesis, characterization, and amidoximation of diaminomaleodinitrile-functionalized polyethylene terephthalate grafts for collecting heavy metals from waste water”, Journal of Applied Polymer Science, Vol. 125, pp. 1136–1145, 2012.
• [25]. X. Ping, M. Wangn, X. Ge, “Radiation induced graft copolymerization of n-butyl acrylate onto poly(ethylene terephthalate) (PET) films and thermal properties of the obtained graft copolymer”. Radiation Physics and Chemistry, Vol. 80, pp. 632–637, 2011.
• [26]. L. Hsieh, Y.M. Shinawatra, and M.D. Castillo, “Postirradiation polymerization of vinyl monomers on poly(ethylene terephthalate)” Journal of Applied Polymer Science, Vol. 31, pp. 509–519, 1986.
• [27]. E.M. Abdel-Bary, A.A. Sarhan, and H.H. Abdel-Razik, “Effect of graft co-polymerization of 2-hydroxyethyl methacrylate on the properties of polyester fibers and fabric”, Journal of Applied Polymer Science, Vol. 35, pp. 439–448, 1986.
• [28]. M.M. Nasef, “Gamma radiation-induced graft copolymerization of styrene onto poly(ethylene terephthalate) films” Journal of Applied Polymer Science, Vol. 77, pp. 1003–1012, 2000.
• [29]. N. Rahman, M.S. Hossen, A.R. Miah, M.M. Marjub, N.C. Dafader, S. Shahnaz, M.F. Alam, Removal of Cu(II), Pb(II) and Cr(VI) ions from aqueous solution using amidoximated non-woven polyethylene-g-acrylonitrile fabric, Journal of Environmental Health Science & Engineering, Vol. 17, pp. 183–194, 2019.
• [30]. E.A. Hegazy, H. Kamal, N. Maziad, A.M. Dessouki, Membranes prepared by radiation grafting of binary monomers for adsorption of heavy metals from industrial wastes. Nuclear Instruments and Methods in Physics Research Section B, Vol. 151, pp. 386–392, 1999.
• [31]. E.A. Hegazy, H. Kamal, N.A. Khalifa, and G.H.A. Mahmoud, “Separation and extraction of some heavy and toxic metal ions from their wastes by grafted membranes”, Journal of Applied Polymer Science, Vol. 81, pp. 849–860, 2001.
• [32]. E.A. Hegazy, H.A. Abd El-Rehim, A.M.I. Ali, H.G. Nowier, and H.F. Aly, “Characterization and application of radiation grafted membranes in treatment of intermediate active waste”, Nuclear Instruments and Methods in Physics Research Section B, Vol. 151, pp. 393–398, 1999.
• [33]. H.A. Abd El-Rehim, E.A. Hegazy, and A.E. Ali, “Selective removal of some heavy metal ions from aqueous solution using treated polyethylene- g-styrene /maleic anhydride membranes”, Reactive and Functional Polymers, Vol. 43, pp. 105–116, 2000.
• [34]. W.R. Feairheller, J.R. Katon, and J.E. Katon, “The vibrational spectra of acrylic acid and sodium acrylate”, Spectrochimica Acta, Vol. 23A, pp. 2225-2232, 1967.
• [35]. C. González-Blanco, L.J. Rodríguez, and M.M. Velázquez, “Effect of the Addition of Water-Soluble Polymers on the Structure of Aerosol OT Water-in-Oil Microemulsions: A Fourier Transform Infrared Spectroscopy Study”, Langmuir, Vol. 13, pp. 1938-1945, 1997.
• [36]. X. Lv, H. Li, Z. Zhang, H. Chang, L. Jiang, and H. Liu, “UV Grafting Modification of Polyethylene Separator for Liion Battery”, Physics Procedia, Vol. 25, pp. 227-232, 2012.
• [37]. Y.S. Ho, “Review of second-order models for adsorption systems”, Journal of Hazardous Materials, Vol. 136(3), pp. 681-689, 2006.
• [38]. C. Namasivayam, and D.J.S.E. Arasi, “Removal of congo red from wastewater by adsorption onto waste red mud” Chemosphere, Vol. 34(2), pp. 401–417, 1997.
• [39]. S. Rengaraj, J.W. Yeon, Y. Kim, Y. Jung, Y.K. Ha, and W.H. Kim, “Adsorption characteristics of Cu(II) onto ion exchange resins 252H and 1500H: kinetics, isotherms and error analysis”. Journal of Hazardous Materials, Vol. 143(1-2), pp. 469-477, 2007.
• [40]. Y. Li, Q.Y. Yue, and B.Y. Gao, “Adsorption kinetics and desorption of Cu(II) and Zn(II) from aqueous solution onto humic acid”, Journal of Hazardous Materials, Vol. 178(1-3), pp. 455-461, 2010.
• [41]. M.G.A Vieira, A.F.A. Neto, M.G.C. Silva, and C.N. Carneiro, “Adsorption of lead and copper ions from aqueous effluents on rice husk ash in dynamic equilibrium”, Brazilian Journal of Chemical Engineering, Vol. 31(2), pp 519 – 529, 2014.
• [42]. M. Salim, and Y. Munekage “Lead Removal from Aqueous Solution Using Silica Ceramic: Adsorption Kinetics and Equilibrium Studies” International Journal of Chemistry, Vol. 1(1), pp. 23-30, 2009.
• [43]. N. Chaouch, M.R. Ouahrani, and S.E. Laouini, “Adsorption of Lead (II) from aqueous solutions onto activated carbon prepared from Algerian dates stones of Phoenix dactylifera.L (Ghars variety) by H3PO4 activation”, Oriental Journal of Chemistry, Vol. 30(3), pp. 1317-1322, 2014.
• [44]. P. Shekinah, K. Kadirvelu, P. Kanmani, P. Senthilkumar, and V. Subburam, “Adsorption of lead(II) from aqueous solution by activated carbon prepared from Eichhornia”, Journal of Chemical Technology and Biotechnology, Vol. 77(4), pp. 458-464, 2002.
• [45]. Y. Wu, S. Zhang, X. Guo, and H. Huang, “Adsorption of chromium(III) on lignin”, Bioresource Technology, Vol. 99, pp. 7709–7715, 2008.
• [46]. J. Anwar, U. Shafique, M. Salman, W.U. Zaman, S. Anwar, and J.M. Anzano, “Removal of chromium (III) by using coal as adsorbent”, Journal of Hazardous Materials, Vol. 171, pp. 797-801, 2009.
• [47]. L. Pietrelli, I. Francolini, A. Piozzi, M. Sighicelli, I. Silvestro, and M. Vocciante, “Chromium(III) Removal from Wastewater by Chitosan Flakes”, Applied Sciences, Vol. 10(6), 1925; 2020. doi:10.3390/app10061925.
• [48]. G. Campos-Flores, J. Gurreonero-Fernández, and R. Vejarano R, “Passion-fruit shell biomass as adsorbent material to remove chromium III from contaminated aqueous mediums”, IOP Conf. Series: Materials Science and Engineering 620 (2019) 012110 IOP Publishing doi:10.1088/1757-899X/620/1/012110