Characterisation of aluminium industrial wastewater and investigation of recovery alternatives

Year 2022, Volume: 5 Issue: 3, 249 - 256, 30.09.2022

Hicran Kaya Elçin Güneş Nesli Aydın

https://doi.org/10.35208/ert.1036966

Cited By: 1

Abstract

Aluminium industry is one of the largest sectors and wastewater generated from this industry could cause crucial environmental problems due to its high heavy metal concentration and conductivity. Therefore, this study aims to determine the characterisation of the wastewater discharged from the two aluminium facilities by considering water recovery potential. While Facility-A produces stainless steel kitchenware, such as pots and pans, In Facility-B, anodised coating takes place from secondary aluminium and wastewater is generated from the units where anodised coating baths and control processes are carried out. For the analyses, the wastewater composite samples from different sections, such as washing, sand-blasting and dyeing in Facility-A were taken in 2 and 24 hours. In Facility-B, three 2-hour composite influent water samples and an effluent sample from chemical wastewater treatment were taken to determine conductivity, pH, chemical oxygen demand (COD), total suspended solids (TSS), etc. As a result of the analyses made, a high value of TSS was detected at all sampling points in Facility-A. It was also seen that the conductivity after demineralisation process in Facility-A was below 30. In Facility-B, it was determined that while the pH obtained from two influent samples was below the discharge limits and showed acidic characteristics, one sample was very basic with a pH value of 12.19 and exceeds the upper limit of discharge. All influent samples in Facility-B show high TSS content in comparison with discharge limits specified in the regulation.

Keywords

Aluminium Industry, chemical oxygen demand, total suspended solids, water recovery, wastewater

Supporting Institution

NA

Project Number

NA

References

• [1]. P. Kinnunen, R. Obenaus-Emler, J. Raatikainen, J. Guimara, A. Ciroth, and K. Heiskanen, “Review of closed water loops with ore sorting and tailings valorisation for a more sustainable mining industry,” Journal of Cleaner Production, Vol. 278 (1), 2021, 123237. https://doi.org/10.1016/j.jclepro.2020.123237
• [2]. D. Liu, E. Mansour, P. Fawell, and L. Berry, “Improved water recovery: A review of clay-rich tailings and saline water interactions,” Powder Technology, Vol. 364, pp. 604-621, 2020.
• [3]. K. Tütün, Z. Utlu, and Y.B. Büyükakıncı, “Eloksal kaplama tesislerinde atıksu ve hammadde geri kazanımının önemi,” ABMYO Dergisi, Vol. 47, pp. 93-112. 2017
• [4]. E. Poulin, J.F. Blais, G. Mercier, “Transformation of red mud from aluminium industry into a coagulant for wastewater treatment,” Hydrometallurgy, Vol. 92 (1–2), pp. 16-25, 2008
• [5]. S. Velusamy, A. Roy, S. Sundaram, and T.K. Mallick, “A Review on Heavy Metal Ions and Containing Dyes Removal Through Graphene Oxide-Based Adsorption Strategies for Textile Wastewater Treatment,” A Journal of the Chemical Society of Japan, Vol. 21 (7), pp. 1570-1610. https://doi.org/10.1002/tcr.202000153
• [6]. İ. Özbay, and M. Kavaklı,, “Alüminyum Sektörü Endüstriyel Atiksu Aritma Tesislerinin Kontrolü Ve İşletme Sorunlarininin Çözümlerine Yönelik Uygulanabilir Öneriler”, in Blacksea International Environmental Symposium, August 25-29, 2008, Giresun, Turkey
• [7]. N.A.A. Qasem, R.H. Mohammed, and D.U. Lawal, “Removal of heavy metal ions from wastewater: a comprehensive and critical review,” Npj Clean Water, Vol. 4 36. 2021
• [8]. M. Hasanpour, and M. Hatami, “Application of three dimensional porous aerogels as adsorbent for removal of heavy metal ions from water/wastewater: A review study”, Advances in Colloid and Interface Science, Vol. 284, 102247, 2020. https://doi.org/10.1016/j.cis.2020.102247
• [9]. T. Chambino, A. Correia, and S. Barany, “Aluminium Salts Hydrolysis Products from Industrial Anodising Sludges in Wastewater Treatment,” Colloids for Nano- and Biotechnology, pp 65-69
• [10]. J.M. Choubert, L. Rieger, A. Shaw, J. Copp, M. Spérandio, K. Sørensen, S. Rönner-Holm, E. Morgenroth, H. Melcer, and S. Gillot, “Rethinking wastewater characterisation methods for activated sludge systems – a position paper,” Water Sci Technol, Vol. 67 (11), pp. 2363–2373, 2013. https://doi.org/10.2166/wst.2013.158
• [11]. Ministry of Environment, Urbanisation and Climate Change, “Water Pollution Control Regulation”, Official Gazette, 31.12.2004, No: 25687