Research Article
BibTex RIS Cite

The Effect of Water Content on TiO2 nanotube Formation by Anodic Oxidation

Year 2019, Volume: 12 Issue: 3, 1738 - 1746, 31.12.2019
https://doi.org/10.18185/erzifbed.635408

Abstract

In this thesis, TiO2 nanotube arrays (TND) were grown on
titanium foil using anodic oxidation (anodization) method. To understand the
effect of water in the electrolyte, different amounts of water were added to
the TiO2 nanotube arrays. The crystal structure and surface
morphology of the obtained TiO2 nanotube arrays were examined by XRD
and SEM techniques. Photo-electrocatalytic activities and electrochemical
impedance spectra (EIS) of TNDs grown in electrolytes containing different
water additives were investigated. As the amount of water in the electrolyte
increased, the nanotube morphology deteriorated, but the crystal structure
improved. Furthermore, as the water additive increased, TNDs showed better
photo-electrocatalytic performance. In direct proportion to this, it was
observed that the load transfer resistance on the surface of the TND decreased
as the water contribution increased.

References

  • Çırak, Ç. (2016) “Güneş Pili Uygulamalarında Kullanılan Bazı Boyar Maddelerinin, TiO2 Nanotüpler Üzerine Adsorpsiyonun İncelenmesi”, BAP FEN-A-220114-0064, Erzincan, 4-6.
  • Demeestere, K., Dewulf, J. and Langenhove, H.V. (2007) “Heterogeneous Photocatalysis As an Advanced Oxidation Process For the Abatement of Chlorinated, Monocyclic Aromatic and Sulfurous Volatile Organic Compounds in Air: State of the Art”, Environmental Science and Technology, 762, 489-538.
  • Eden, Ç. (2019) “Farklı Sıcaklıklarda Sentezlenen TiO2/ZnO Nanokompozit Yapıların Karakterizasyonu ve Boya Duyarlı Güneş Pili Performanslarının İncelenmesi”, Yüksek Lisans Tezi, Erzincan Binali Yıldırım Üniversitesi Fen Bilimleri Enstitüsü, Erzincan, 1-67.
  • Li, J., Wang, X., Jiang, H., Lu, X., Zhu, Y. and Chen, B. (2011) “New Strategy of Photodynamic Treatment of TiO2 Nanofibers Combined With Celastrol for HepG2 Proliferation in Vitro”, Nanoscale, 8.
  • Nisar, J., Topalion, Z., Sarkar, A.D., Österlund, L. And Ahuja, R. (2013) “TiO2-Based Gas Sensor: A Possible Apolication to SO2”, Applied Materials&Interfaces, 5(17), 8516-8522.
  • Regonini, D., Bowen, C.R., Jaroenworaluck, A. and Stevens, R. (2013) “A Review of Growth Mechanism, Structure and Crystallinity of Anodized TiO2 Nanotubes”, Material Science and Engineering: R: Reports, 74(12), 377-406.
  • Reddy, M.V., Rao, G.V.S. and Chowdari, B.V.R. (2013) “Metal Oxides and Oxysalts As Anode Materials For Li Ion Batteries”, Chemical Reviews, 113(7), 5364-5457.
  • Wang, Q., Chen, C., Liu, W., Gao, S. and Yang, X. (2016) “Recent Progress in All-Solid-State Quantum Dot-Sensitized TiO2 Nanotube Array Solar Cells”, Journal of Nanoparticle Research, 18(7).
  • Yang, L., Zhai, B., Ma, Q and Huang, Y.M. (2014) “Effect of ZnO Decoration on the Photovoltaic Performance of TiO2 Based Dye Sensitized Solar Cells”, Journal of Alloys and Compounds, 605, 109-112.
  • Zwilling, V., Darque-Ceretti, E., Boutry-Forveille, A., David, D., Perrin, M.Y. and Aucouturier, M. (1999) “Structure and Physicochemistry of Anodic Oxide Films On Titanium and TAV6 Alloy”, Surface and Interface Analysis, DOI:10.1002/(SICI)1096-9918 (199907)27:7 <629:: AID-SIA551>3.0.CO;2-0.
  • Xia, Y., Yang, P., Sun, Y., Wu, Y., Mayers, B., Gates, B., Yin, Y., Kim, F., Yan, H. 2003. “One-Dimensional Nanostructures: Synthesis, Characterization, and Applications”, Advanced Materials, 15, 353-389.
  • Yang, L., Zhai, B., Ma, Q., Huang, Y.M. 2014. “Effect of ZnO decoration on the photovoltaic performance of TiO2 based dye sensitized solar cells”, Journal of Alloys and Coumpounds, 605, 109-112.

Anodik Oksidasyon ile TiO2 Nanotüp Oluşumuna Su Katkısının Etkileri

Year 2019, Volume: 12 Issue: 3, 1738 - 1746, 31.12.2019
https://doi.org/10.18185/erzifbed.635408

Abstract

Bu tez çalışmasında, anodik oksidasyon (anodizasyon) yöntemi kullanılarak,
TiO2 nanotüp dizileri (TND) titanyum folyo üzerine büyütülmüştür.
TiO2 nanotüp dizilerine, elektrolit içindeki suyun etkisini anlamak
için, çözeltilere farklı miktarlarda su eklenmiştir. Elde edilen TiO2
nanotüp dizilerinin kristal yapısı ve yüzey morfolojisi XRD ve SEM teknikleri
ile incelenmiştir. Farklı su katkıları içeren elektrolitlerde büyütülen,
TND’lerin foto-elektrokatalitik aktiviteleri ve elektrokimyasal empedans
spektrumları (EIS) incelenmiştir. Elektrolit içerisindeki su miktarı arttıkça
nanotüp morfolojisi bozulmuş fakat kristal yapısı iyileşme gözlemlenmiştir.
Ayrıca, su katkısı artıkça, TND’ler daha iyi foto-elektrokatalitik performans
göstermiştir. Bununla doğru orantılı olarak, su katkısı arttıkça TND’lerin
yüzeyindeki yük transfer direncinin azaldığı görülmüştür.

References

  • Çırak, Ç. (2016) “Güneş Pili Uygulamalarında Kullanılan Bazı Boyar Maddelerinin, TiO2 Nanotüpler Üzerine Adsorpsiyonun İncelenmesi”, BAP FEN-A-220114-0064, Erzincan, 4-6.
  • Demeestere, K., Dewulf, J. and Langenhove, H.V. (2007) “Heterogeneous Photocatalysis As an Advanced Oxidation Process For the Abatement of Chlorinated, Monocyclic Aromatic and Sulfurous Volatile Organic Compounds in Air: State of the Art”, Environmental Science and Technology, 762, 489-538.
  • Eden, Ç. (2019) “Farklı Sıcaklıklarda Sentezlenen TiO2/ZnO Nanokompozit Yapıların Karakterizasyonu ve Boya Duyarlı Güneş Pili Performanslarının İncelenmesi”, Yüksek Lisans Tezi, Erzincan Binali Yıldırım Üniversitesi Fen Bilimleri Enstitüsü, Erzincan, 1-67.
  • Li, J., Wang, X., Jiang, H., Lu, X., Zhu, Y. and Chen, B. (2011) “New Strategy of Photodynamic Treatment of TiO2 Nanofibers Combined With Celastrol for HepG2 Proliferation in Vitro”, Nanoscale, 8.
  • Nisar, J., Topalion, Z., Sarkar, A.D., Österlund, L. And Ahuja, R. (2013) “TiO2-Based Gas Sensor: A Possible Apolication to SO2”, Applied Materials&Interfaces, 5(17), 8516-8522.
  • Regonini, D., Bowen, C.R., Jaroenworaluck, A. and Stevens, R. (2013) “A Review of Growth Mechanism, Structure and Crystallinity of Anodized TiO2 Nanotubes”, Material Science and Engineering: R: Reports, 74(12), 377-406.
  • Reddy, M.V., Rao, G.V.S. and Chowdari, B.V.R. (2013) “Metal Oxides and Oxysalts As Anode Materials For Li Ion Batteries”, Chemical Reviews, 113(7), 5364-5457.
  • Wang, Q., Chen, C., Liu, W., Gao, S. and Yang, X. (2016) “Recent Progress in All-Solid-State Quantum Dot-Sensitized TiO2 Nanotube Array Solar Cells”, Journal of Nanoparticle Research, 18(7).
  • Yang, L., Zhai, B., Ma, Q and Huang, Y.M. (2014) “Effect of ZnO Decoration on the Photovoltaic Performance of TiO2 Based Dye Sensitized Solar Cells”, Journal of Alloys and Compounds, 605, 109-112.
  • Zwilling, V., Darque-Ceretti, E., Boutry-Forveille, A., David, D., Perrin, M.Y. and Aucouturier, M. (1999) “Structure and Physicochemistry of Anodic Oxide Films On Titanium and TAV6 Alloy”, Surface and Interface Analysis, DOI:10.1002/(SICI)1096-9918 (199907)27:7 <629:: AID-SIA551>3.0.CO;2-0.
  • Xia, Y., Yang, P., Sun, Y., Wu, Y., Mayers, B., Gates, B., Yin, Y., Kim, F., Yan, H. 2003. “One-Dimensional Nanostructures: Synthesis, Characterization, and Applications”, Advanced Materials, 15, 353-389.
  • Yang, L., Zhai, B., Ma, Q., Huang, Y.M. 2014. “Effect of ZnO decoration on the photovoltaic performance of TiO2 based dye sensitized solar cells”, Journal of Alloys and Coumpounds, 605, 109-112.
There are 12 citations in total.

Details

Primary Language Turkish
Subjects Engineering
Journal Section Makaleler
Authors

Burcu Bozkurt Çırak 0000-0001-8634-9622

Ergin Kavaklı This is me 0000-0002-3817-1708

Publication Date December 31, 2019
Published in Issue Year 2019 Volume: 12 Issue: 3

Cite

APA Bozkurt Çırak, B., & Kavaklı, E. (2019). Anodik Oksidasyon ile TiO2 Nanotüp Oluşumuna Su Katkısının Etkileri. Erzincan University Journal of Science and Technology, 12(3), 1738-1746. https://doi.org/10.18185/erzifbed.635408