Bitlis Yöresindeki Bazalt ve Kireçtaşı Agregalarının Parçalanma ve Aşınma Direncinin Araştırılması ve MgSO4 ile Yassılık İndeksi Değerleri Arasındaki İlişkinin İncelenmesi

Abstract

Agregaların mekanik özellikleri asfalt karışımların performansını doğrudan etkilemektedir. Yol yapımında kullanılacak agregaların bazı önemli özelliklere sahip olması gerekir; temiz, sert, dayanıklı, aşınmaya karşı dirençli, homojen nitelikte ve zararlı maddelerden arındırılmış olmalıdır. Aşınmaya karşı direnç, agregaların kullanımını içeren mühendislik alanlarında oldukça önemli bir özelliktir. Agregaların aşınma ve parçalanma performans özelliklerini belirlemek için yapılan en yaygın mekanik deneyler Los Angeles parçalanma ve Mikro-Deval aşınma deneyidir. Bu çalışmada bazalt ve kalker agregası kullanılarak her iki agreganın aşınma ve parçalanmaya karşı dirençleri yassılık indeksi ve dona karşı dayanımları ile aralarındaki ilişkileri analiz edilmiştir. Ayrıca Los Angeles ve Mikro-deval deney prosürlerindeki parametreler değerlendirilmiştir. Deney sonuçlarına göre Mikro-Deval deneyi ile agregaların diğer fiziksel ve dayanım özellikleri ile aralarındaki ilişkinin daha tutarlı olduğu ve Mikro deval aşınma deneyinin agregaların parçalanma direncinin belirlenmesinde daha gerçekçi değerler sunduğu belirlenmiştir. Ayrıca Los Angeles deneyinde kullanılan çelik bilyelerin agregaların iç özelliklerinin parçalanma süreci üzerindeki gerçek etkisini yansıtmadığı kanısına varılmıştır.

Keywords

• Yol agregaları
• Bazalt
• Kalker
• Los angeles
• Mikro-deval

Investigation of Fragmentation and Abrasion Resistance of Basalt and Limestone Aggregates in Bitlis Region and the Relationship between MgSO4 and Flatness Index Values

Abstract

The mechanical characteristics of aggregates have a direct impact on the performance of asphalt mixtures. The aggregates used in road construction must possess certain essential qualities; they should be clean, hard, durable, resistant to abrasion, of uniform quality, and free from harmful substances. Resistance to abrasion is a very important property in engineering fields involving the use of aggregates. The Los Angeles fragmentation and Micro-Deval abrasion tests are among the most commonly used mechanical tests to assess the performance characteristics of aggregates in terms of abrasion and fragmentation. This study examined the abrasion and fragmentation resistance, flatness index, and frost resistance of both basalt and limestone aggregates. The study also evaluated parameters within the Los Angeles and Micro-Deval test processes. Based on the test results, it was concluded that the Micro-Deval abrasion test exhibited a more consistent relationship with other physical and strength properties of the aggregates. Moreover, the Micro-Deval test provided more realistic values for assessing the fragmentation resistance of the aggregates. Additionally, it was concluded that the steel balls employed in the Los Angeles test did not accurately represent the true impact of the internal properties of the aggregates on the disintegration process.

Keywords

• Road aggregates
• Basalt
• Limestone
• Los angeles
• Mikro-deval

References

1. A. Teymen, "Estimation of Los Angeles abrasion resistance of igneous rocks from mechanical aggregate properties," Bull. Eng. Geol. Environ., vol. 78, no. 2, pp. 837–846, 2019.
2. N. K. A. Seyed Vahid Alavi, M. Yilmaz, D. J. Armaghani, and A. Tugrul, "Prediction of the durability of limestone aggregates using computational techniques," Neural Comput. Appl., vol. 29, pp. 423–433, 2018.
3. T. Umar, E. Charles, and S. Messaoud, "A modified method for Los Angeles abrasion test," Iran. J. Sci. Technol., vol. 44, pp. 941–947, 2020.
4. M. Palassi and D. Akbar, "Relationships between abrasion/degradation of aggregate evaluated from various tests and the effect of saturation," Rock Mech. Rock Eng., vol. 49, pp. 2937–2943, 2016.
5. E. T. Tunc and K. E. Alyamac, "Determination of the relationship between the Los Angeles abrasion values of aggregates and concrete strength using the Response Surface Methodology," Constr. Build. Mater., vol. 260, p. 119850, 2020.
6. W. Sun, Y. Liu, D. S. Lane, H. Nair, and L. Wang, "Experimental investigation of the relationship between mineral content and aggregate morphological characteristics using the improved FTI system and XRD method," Constr. Build. Mater., vol. 155, pp. 981–991, 2017.
7. İ. Gökalp, V. E. Uz, and M. Saltan, "Testing the abrasion resistance of aggregates including by-products by using Micro Deval apparatus with different standard test methods," Constr. Build. Mater., vol. 123, pp. 1–7, 2016.
8. E. Erichsen, A. Ulvik, and K. Sævik, "Mechanical degradation of aggregate by the Los Angeles-, the Micro-Deval- and the Nordic test methods," Rock Mech. Rock Eng., vol. 44, pp. 333–337, 2011.

9. S. Kahraman and M. Fener, "Predicting the Los Angeles abrasion loss of rock aggregates from the uniaxial compressive strength," Mater. Lett., vol. 61, pp. 4861–4865, 2007.
10. M. Fladvad and A. Ulvik, "Large-size aggregates for road construction—a review of standard specifications and test methods," Bull. Eng. Geol. Environ., vol. 80, pp. 8847–8859, 2019.
11. C. Li, J. C. Ashlock, D. J. White, C. T. Jahren, and B. Cetin, "Gyratory abrasion with 2D image analysis test method for evaluation of mechanical degradation and changes in morphology and shear strength of compacted granular materials," Constr. Build. Mater., vol. 152, pp. 547–557, 2017.
12. B. Czinder, B. Vásárhelyi, and Á. Török, "Long-term abrasion of rocks assessed by micro-Deval tests and estimation of the abrasion process of rock types based on strength parameters," Eng. Geol., vol. 282, p. 105996, 2021.
13. E. Erichsen, "Plotting aggregate degradation results from the Los Angeles test on a triangular diagram: proposal of a new quality ranking for aggregates," Bull. Eng. Geol. Environ., vol. 74, pp. 667–671, 2014.
14. E. T. Tunc and K. E. Alyamac, "A preliminary estimation method of Los Angeles abrasion value of concrete aggregates," Constr. Build. Mater., vol. 222, pp. 437–446, 2019.
15. K. Miskovsky, M. T. Duarte, S. Q. Kou, and P. A. Lindqvist, "Influence of the mineralogical composition and textural properties on the quality of coarse aggregates," J. Mater. Eng. Perform., vol. 13, pp. 144–150, 2004.
16. I. Rigopoulos, B. Tsikouras, P. Pomonis, and K. Hatzipanagiotou, "Determination of the interrelations between the engineering parameters of construction aggregates from ophiolite complexes of Greece using factor analysis," Constr. Build. Mater., vol. 49, pp. 747–757, 2013.
17. R. Fournari and L. Loannou, "Correlations between the properties of crushed fine aggregates," Minerals, vol. 9, p. 86, 2019.
18. C. S. Cook, B. F. Tanyu, and A. Yavuz, "Effect of particle shape on durability and performance of unbound aggregate base," J. Mater. Civ. Eng., vol. 29, p. 04016221, 2017.
19. M. Bulevičius, K. Petkevičius, and S. Čirba, "The influence of geometric parameters on strength properties of the aggregates used to produce asphalt mixtures," J. Civ. Eng. Manag., vol. 19, pp. 894–902, 2013.
20. Y. Qian, H. Boler, M. Moaveni, E. Tutumluer, Y. M. A. Hashash, and J. Ghaboussi, "Characterizing ballast degradation through Los Angeles abrasion test and image analysis," Transp. Res. Rec., vol. 2448, pp. 142–151, 2014.
21. I. D. Quintanilla, G. Combe, F. Emeriault, C. Voivret, and J. F. Ferellec, "X-ray CT analysis of the evolution of ballast grain morphology along a Micro-Deval test: key role of the asperity scale," Granular Matter, vol. 21, p. 30, 2019.
22. H. Ge, A. Sha, Z. Han, and X. Xiong, "Three-dimensional characterization of morphology and abrasion decay laws for coarse aggregates," Constr. Build. Mater., vol. 188, pp. 58–67, 2018.
23. D. Wang, H. Wang, Y. Bu, C. Schulze, and M. Oeser, "Evaluation of aggregate resistance to wear with Micro-Deval test in combination with aggregate imaging techniques," Wear, vol. 338-339, pp. 288–296, 2015.
24. T. E. 1097-2, "Agregaların mekanik ve fiziksel özellikleri için deneyler bölüm 2: Parçalanma direncinin tayini için metotlar," Türk Standartları Enstitüsü, Ankara, 2010.
25. R. Ajalloeian and M. Kamani, "An investigation of the relationship between Los Angeles abrasion loss and rock texture for carbonate aggregates," Bull. Eng. Geol. Environ., vol. 78, pp. 1555–1563, 2017.
26. H. Haraldsson, "Relations between petrography and the aggregate properties of Icelandic rocks," Bull. Eng. Geol. Environ., vol. 30, 1984.
27. KGM, Karayolları Teknik Şartnamesi, Ankara: Karayolları Genel Müdürlüğü, 2013.
28. T. E. 1097-1, "Agregaların mekanik ve fiziksel özellikleri için deneyler Bölüm 1: Aşınma Direncinin tayini (Mikro-Deval)," Türk Standartları Enstitüsü, Ankara, 2011.
29. J. Wu, L. Wang, Y. Hou, Z. Qian, L. Meng, and Q. Zhao, "Simulation on the Micro-Deval test for the aggregate wear properties measurement," Constr. Build. Mater., vol. 180, pp. 445–454, 2018.
30. I. D. Quintanilla, D. Deiros, F. Emeriault, J. B. Toni, C. Voivret, and J. F. Ferellec, "Wear of sharp aggregates in a rotating drum," in EPJ Web Conf., France, 2017.
31. L. Pang, S. Wu, J. Zhu, and L. Wan, "Relationship between retrographical and physical properties of aggregates," J. Wuhan Univ. Technol.-Mater. Sci. Ed., vol. 25, no. 4, pp. 678–681, 2010.
32. S. Adomako, C. J. Engelsen, R. T. Thorstensen, and D. M. Barbieri, "Review of the relationship between aggregates geology and Los Angeles and micro-Deval tests," Bull. Eng. Geol. Environ., vol. 80, pp. 1963–1980, 2021.
33. H. Wang, D. Wang, P. Liu, J. Hu, C. Schulze, and M. Oeser, "Development of morphological properties of road surfacing aggregates during the polishing process," Int. J. Pavement Eng., vol. 18, pp. 367–380, 2017.