Kuvars dolgulu polyester kompozitlerin aşınma özelliklerinin araştırılması

Yıl 2021, , 1229 - 1240, 24.05.2021

Ergun Ateş

https://doi.org/10.17341/gazimmfd.738671

Cited By: 1

Öz

Kuvars dolgu malzemeli polyester kompozitlerin aşınma olayında ağırlık kaybı ve aşınma direnci incelenmiştir. Aşınma makinesinde numuneye uygulanan yük sistemi, numunenin yüzeyine yatay olarak baskı yapan bir çelik plakada bağlı bir aşındırıcının doğrusal gidip gelme hareketi yaparak, kompozit yüzeyine sürtünmesiyle çalışır. Çalışma yükleri 10, 20 ve 30 N’dur. Uygulanan süreler 10, 20, 30, 40, 50 ve 60 dakika‘dır. Deneyler sonucunda artan yük ve süre ile ağırlık kayıplarının arttığı belirlenmiştir. Kompozit tiplerinden B, düşük ağırlık kaybı ve büyük aşınma direncine sahip olmuştur. B kompozit tipi için ağırlık kaybı ve aşınma direnci en büyük değerleri sırasıyla 0,1949 g ve 4,4334 Nm/m3 olmuştur.

Anahtar Kelimeler

Aşınma deneyi, aşınma direnci, sürtünme katsayısı, polimer matris, kompozitler

Destekleyen Kurum

Yok.

Proje Numarası

Yok.

Teşekkür

Yok.

Kaynakça

• [1] Rajesh JJ, Bijwe J, Tewar US, Influence of fillers on abrasive wear of short glass fibre reinforced polyamide composites. Journal of Materials Science: 36, 351-356, 2001.
• [2] Chand N, Dwivedi UK. Influence of fiber orientationon high stres wear behavior of sisal fiber reinforced epoxy composites. Polymer Composites. 4, 28, 437-441, 2007.
• [3] Srivastava VK, Wahne S. Wear and friction behaviour of soft particles filled random direction short GFRP composites. Materials Science and Engineering A. (1-2), 458, 25–33, 2007.
• [4] Suresha B, Chandramohan G, Samapthkumaran P, Seetharamu S. Investigation of the friction and wear behavior of glass-epoxy composite with and without graphite filler. Journal of Reinforced Plastics and Composites. 26, 1, 81-93, 2007.
• [5] Suresha B, Chandramohan G, Jawali N. D, Siddaramaiah. Effect of short glass fiber content on three-body abrasive wear behaviour of polyurethane composites. Journal of Composite Materials. 22, 41, 2701-2713, 2007. [6] Jalham IS. The influence of process and material variables on the surface properties of polystyrene matrix reinforced with silica sand. Journal of Thermoplastic Composite Materials. 11, 18, 529-541, 2005. [7] Xie XL, Tang CY, Chan KYY, Wu XC, Tsui CP, Cheung CY. Wear performance of ultrahigh molecular weight polyethylene quartz composites. Biomaterials. 11, 24, 889-1896, 2003.
• [8] Renker HJ. Stone based structural materials. Precision Engineering. 7, 3, 161-164, 1985.
• [9] Gu D, Zhang L, Chen S, Song K, Liu S. Significant Reduction of the Friction and Wear of PMMA Based Composite by Filling with PTFE. Polymers. 10, 966, doi:10.3390/polym10090966, 2018.
• [10] Muhandes H, Kalacska G, Kadi N, Skrifvars M. Pin-on-Plate Abrasive Wear Test for Several Composite Materials. Polymers. Proceedings. MDPI. 2, 469, 6, doi:10.3390/ICEM18-05333, 2018.
• [11] Lavrov NA, Kiemov SN, Kryzhanovskii VK. Tribotechnical Properties of Composite Materials Based on Epoxy Polymers. Polymer Science. Series D. 12, 12, 182-185, 2019.
• [12] Selkin VP, Kopylov SV. Improving the Wear Resistance of Carbon Fiber Reinforced Polyviniylidene Flouride by the Method of Radiation Modification. Journal of Friction and Wear. 40, 2, 116-119, 2019.
• [13] Schön J., Coefficient of friction and wear of a carbon fiber epoxy matrix composite, Wear, 257, 395-407, 2004.
• [14] El-Tayeb, N. S. M., Two-body abrasive behaviour of untreated SC and R-G fibres polyester composites, Wear, 13, doi:10.1016/j.wear.2008.06.018, 2008.
• [15] Ateş E. The effect of temperature change on flexural strength of polymer concrete composites with polyester resin during hardening at furnace atmosphere. Science and Engineering of Composite Materials. 14, 3, 205-218, 2007.
• [16] Ateş E. Optimization of compression strength by granulometry and change of binder rates in epoxy and polyester resin concrete. Journal of Reinforced Plastics and Composites. Jan. 28, 2, 235-246, 2005.
• [17] TS 802, The Turkish Standards Institution, Design concrete mixes. 2016. [18] DIN 1045-2, Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1. 2008.
• [19] EN 12620, European Standard. Aggregates for concrete. 2003.
• [20] ISO 3310-1, International Organization for Standardization. Test Sieves – Technical Requirements and Testing - Part 1; Test Sieves of Metal Wire Cloth. 2016.
• [21] ASTM C136/C136M-19, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA, 2019.