AĞIR METALLERİN GİDERİMİ İÇİN DÜŞÜK MALİYETLİ ADSORBAN OLARAK PİRİNA KULLANIMI

Yıl 2017, Cilt: 32 Sayı: 2, 0 - 0, 13.06.2017

Oğuzhan Gök , Özgül Çimen Mesutoğlu

https://doi.org/10.17341/gazimmfd.322176

Cited By: 7

Öz

Son yıllarda düşük maliyetli tarımsal atıklar kullanılarak ağır metallerin sulardan uzaklaştırılması çalışmaları hız kazanmıştır. Zeytinyağı endüstrisi atığı olan pirinanın (zeytin posası) adsorban olarak kullanılmasıyla sularda çözünmüş Cr(VI) ve Cu(II) ağır metallerinin giderimi araştırılmıştır. Deneysel adsorpsiyon prosesinde, sıcaklık  (20^oC), adsorban dozu (0.5 g) ve partikül boyutu (0.5-2.0 mm) sabit tutularak; giderim verimine Ph (2-6),  temas süresi (2-120 dk) ve başlangıç ağır metal konsantrasyonlarının (5-100 mg/L) etkileri incelenmiştir. pH 4, temas süresi 15 dk ve başlangıç ağır metal konsantrasyonu 5 mg/L’de aktifleştirilmiş pirina (AP) kullanılarak Cr(VI) ve Cu(II) maksimum giderimleri %98.8 ve %93.2 olarak elde edilmiştir. Bu sonuçlar doğrultusunda Cr(VI) ve Cu(II) için adsorplanma kapasiteleri 0.988 mg/g ve 0.932 mg/g olarak tespit edilmiştir. Ayrıca, optimum koşullarda kinetik ve izoterm modelleri uygulanmış olup; deneysel .sonuçlar ile yalancı ikinci derece kinetik ve Langmuir izoterm modellerindeki teorik sonuçlar arasında iyi bir uyum gözlenmiştir. FTIR analizi ile çeşitli fonksiyonel gruplar tanımlanmış ve SEM görüntüleri AP’nin gözenekli yapıya sahip olduğunu göstermiştir. Çalışma sonuçları, adsorpsiyon uygulamalarında AP’nin düşük maliyetli adsorban olarak çeşitli alanlarda kullanıma uygunluğunu ispatlamıştır.

Anahtar Kelimeler

Adsorpsiyon, ağır metal, FTIR, pirina, SEM

Kaynakça

• Ali, R.M., Hamada, H.A., Husseinb, M.M. ve Malash, G.F., “Potential of using green adsorbent of heavy metal removal from aqueous solutions: Adsorption kinetics, isotherm, thermodynamic, mechanism and economic analysis”, Ecological Engineering, Cilt 91, 317–332, 2016.
• Jiang, Y., Pang, H. ve Liao B., “Removal of copper(II) ions from aqueous solution by modified bagasse”, Journal of Hazardous Materials, Cilt 164, 1–9, 2009.
• Lee, C.G., Song, M.K., Ryu, J.C., Park, C., Choi, J.W. ve Lee, S.H., “Application of carbon foam for heavy metal removal from industrial plating wastewater and toxicity evaluation of the adsorbent”, Chemosphere, Cilt 153, 1-9, 2016.
• Dissanayake, D.M.R.E.A., Wijesinghe, W.M.K.E.H., Iqbal, S.S., Priyantha, N. ve Iqbal, M.C.M., “Isotherm and kinetic study on Ni(II) and Pb(II) biosorption by the fern Asplenium nidus L.”, Ecological Engineering, Cilt 88, 237–241, 2016.
• Johari, K., Saman, N., Song, S.T., Chin, C.S., Kong, H. ve Mat, H., “Adsorption enhancement of elemental mercury by various surface modified coconut husk as eco-friendly low-cost adsorbents”, International Biodeterioration & Biodegradation, Cilt 109, 45-52, 2016.
• Dursun, Ş. ve Köysüren, H.N., “Sudan kurşun ve nikel iyonlarının Verbascum cheiranthifolium L. materyali ile giderimi”, Journal of the Faculty of Engineering and Architecture of Gazi University, Cilt 29, No 3, 569-577, 2014.
• De Hoces, M.C., Blazquez Garcia, G., Galvez, A.R. ve Martín-Lara, M.A., “Effect of the acid treatment of olive stone on the biosorption of lead in a packed-bed column”, Industrial & Engineering Chemistry Research, Cilt 49, No 24, 12587-12595, 2010.
• Bulut, Y. ve Tez. Z., “Adsorption studies on ground shells of hazelnut and almond”, Journal of Hazardous Materials, Cilt 149, 35-41, 2007.
• Azouaou, N., Sadaoui, Z., Djaafri, A. ve Mokaddema, H., “Adsorption of cadmium from aqueous solution onto untreated coffee grounds: Equilibrium, kinetics and thermodynamics”, Journal of Hazardous Materials, Cilt 184, 126–134, 2010.
• Odoemelam, S.A., Iroh, C.U. ve Igwe, J.C., “Copper(II), Cadmium(II) and Lead(II) adsorption kinetics from aqueous metal solution using chemically modified and unmodified cocoa pod husk (Theobroma cacao) waste biomass”, Research Journal of Applied Science, Cilt 6, No 1, 44-52, 2011.
• Doyurum, S., “Pirinanın Pb(II) ve Cd(II) iyonlarını adsorpsiyon performansının incelenmesi”, Yüksek Lisans Tezi, Celal Bayar Üniversitesi, Fen Bilimleri Enstitüsü, Manisa, 2005.
• Aziz, A., Oualia, M.S. ve Elandaloussia, E.H., “Chemically modified olive stone: A low-cost sorbent for heavy metals and basic dyes removal from aqueous solutions”, Journal of Hazardous Materials, Cilt 163, 441–447, 2009.
• Okur, M., “Teksil atıksularındaki metal kompleks boyarmaddelerin yumurta kabukları ile giderimi”, Journal of the Faculty of Engineering and Architecture of Gazi University, Cilt 28, No 4, 777-785, 2013.
• Huang, G., Wang, D., Ma, S., Chen, J., Jiang, L. ve Wang, P., “A new, low-cost adsorbent: Preparation, characterization, and adsorption behavior of Pb(II) and Cu(II)”, Journal of Colloid and Interface Science, Cilt 445, 294–302, 2015.
• Bhagya, N.P., Prashanth, P.A., Raveendra, R.S., Sathyanarayani, S., Ananda, S., Nagabhushana, B.M. ve Nagabhushana, H., “Adsorption of hazardous cationic dye onto the combustion derived SrTiO3 nanoparticles: Kinetic and isotherm studies”, Journal of Asian Ceramic Societies, Cilt 4, 68–74, 2016.
• Kumar, A.S.K. ve Jiang, S.J., “Chitosan-functionalized graphene oxide: A novel adsorbent an efficient adsorption of arsenic from aqueous solution”, Journal of Environmental Chemical Engineering, Cilt 4, 1698–1713, 2016.
• Srilakshmi, C. ve Saraf, R., “Ag-doped hydroxyapatite as efficient adsorbent for removal of Congo red dye from aqueous solution: Synthesis, kinetic and equilibrium adsorption isotherm analysis”, Microporous and Mesoporous Materials, Cilt 219, 134-144, 2016.
• Matouq, M., Jildeh, N., Qtaishat, M., Hindiyeh, M. ve Al Syouf, M.Q., “The adsorption kinetics and modeling for heavy metals removal from wastewater by Moringa pods”, Journal of Environmental Chemical Engineering, Cilt 3, 775–784, 2015.
• Jamshidi, M., Ghaedi, M., Dashtian, K., Hajati, S. ve Bazrafshan, A.A., “Sonochemical assisted hydrothermal synthesis of ZnO: Cr nanoparticles loaded activated carbon for simultaneous ultrasound-assisted adsorption of ternary toxic organic dye: Derivative spectrophotometric, optimization, kinetic and isotherm study”, Ultrasonics Sonochemistry, Cilt 32, 119–131, 2016.
• Mokhtari, P., Ghaedi, M., Dashtian, K., Rahimi, M.R. ve Purkait, M.K., “Removal of methyl orange by copper sulfide nanoparticles loaded activated carbon: Kinetic and isotherm investigation”, Journal of Molecular Liquids, Cilt 219, 299–305, 2016.
• Chu, L., Liu, C., Zhou, G., Xu, R., Tang, Y., Zeng, Z. ve Luo, S., “A double network gel as low cost and easy recycle adsorbent: Highly efficient removal of Cd(II) and Pb(II) pollutants from wastewater”, Journal of Hazardous Materials, Cilt 300, 153–160, 2015.
• Çimen, Ö., “Pirina kullanılarak sulu çözeltilerden adsorpsiyon yöntemiyle ağır metallerin giderimi”, Yüksek Lisans Tezi, Aksaray Üniversitesi, Fen Bilimleri Enstitüsü, Aksaray, 2014.
• Doymaz, I., Gorel, O. ve Akgün, N.A., “Drying characteristics of the solid by product of olive oil extraction”, Biosystems Engineering, Cilt 88, 213-219, 2004.
• Köysüren, H.N. ve Dursun, Ş., “Sucul ortamdan ağır metal iyonlarının modifiye edilmiş kayısı çekirdeği kabuğu ile giderimi”, Journal of the Faculty of Engineering and Architecture of Gazi University, Cilt 28, No 2, 427-436, 2013.
• Dang, V.B.H., Doan, H.D., Dang-Vu, T. ve Lohi, A., “Equilibrium and kinetics of biosorption of cadmium(II) and copper(II)ions by wheat straw”, Bioresource Technology, Cilt 100, 211–219, 2009.
• Wang, Y., Zhu, L., Jiang, H., Hu, F. ve Shen, X., “Application of longan shell as non-conventional low-cost adsorbent for the removal of cationic dye from aqueous solution”, Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy Cilt 159, 254–261, 2016.
• Fan, L., Luo, C., Sun, M., Li, X. ve Qiu, H., “Highly selective adsorption of lead ions by water-dispersible magnetic chitosan/graphene oxide composites”, Colloids and Surfaces B: Biointerfaces, Cilt 103, 523–529, 2013.
• Wu, Y., Fan, Y., Zhangb, M., Mingb, Z., Yangb, S., Arkinb, A. ve Fang, P., “Functionalized agricultural biomass as a low-cost adsorbent: Utilization of rice straw incorporated with amine groups for the adsorption of Cr(VI) and Ni(II) from single and binary systems”, Biochemical Engineering Journal, Cilt 105, 27–35, 2016.
• Kalavathy, H.M. ve Miranda, L.R., “Moringa oleifera—A solid phase extractant for the removal of copper, nickel and zinc from aqueous solutions”, Chemical Engineering Journal, Cilt 158, 188–199, 2010.
• Dehghani, M.H., Sanaei, D., Ali, I. ve Bhatnagar, A., “Removal of chromium(VI) from aqueous solution using treated waste newspaper as a low-cost adsorbent: Kinetic modeling and isotherm studies”, Journal of Molecular Liquids, Cilt 215, 671–679, 2016.
• Bhattacharya, A.K., Naiya, T.K., Mandal, S.N. ve Das, S.K., “Adsorption, kinetics and equilibrium studies on removal of Cr(VI) from aqueous solutions using different low-cost adsorbents”, Chemical Engineering Journal, Cilt 137, 529–541, 2008.
• Maheshwari, U., Mathesan, B. ve Gupta, S., “Efficient adsorbent for simultaneous removal of Cu(II), Zn(II) and Cr(VI): Kinetic, thermodynamics and mass transfer mechanism”, Process Safety and Environmental Protection, Cilt 98, 198–210, 2015.
• Okafor, P.C., Okon, P.U., Daniel E.F. ve Ebenso, E.E., “Adsorption Capacity of Coconut (Cocos nucifera L.) Shell for Lead, Copper, Cadmium and Arsenic from Aqueous Solutions”, International Journal of Electrochemical Science, Cilt 7, 12354–12369, 2012. (www.electrochemsci.org)