Year 2008,
Volume: 23 Issue: 3, 0 - , 18.02.2013
Abstract
Bu makalede, bir BDT sisteminde tasarlanan katı modellerden düz ve helis dişlileri tanımlamak ve detaylı boyutlarını çıkarmak için bir uzman sistem yazılımı geliştirilmiş ve dişli tanımlama sistemine entegre edilmiştir. Dişlilere ait BDT (Bilgisayar Destekli Tasarım) modellerinin STEP (Standard for the exchange of product data model) dosyaları tüm sisteme girdi olarak kullanılmıştır. Algoritma iki aşamada yürütülmektedir. İlk aşamada, uzman sistem için tasarlanan bir bilgi tabanında temsil edilen kurallar ve herhangi bir dişliye ait BDT modelinin STEP fiziksel dosyası muhakeme edilerek düz ve helis dişliler uzman sistem tarafından tanımlanmaktadır. İkinci aşamada, tanımlanan dişlilerin detaylı boyutları, STEP dosyasından elde edilen veri sayesinde çıkarılmaktadır. Geliştirilen yaklaşım, bu çalışmada sadece düz ve helis dişlilere uygulanmasına rağmen, farklı BDT/BDİ (Bilgisayar Destekli İmalat) uygulamaları için cıvata, somun, rondelâ, boru, vs. gibi farklı parça ailelerine başarı ile uygulanabilir.
References
- Çiçek, A., Gülesin, M., “Reconstruction of 3D
- models from 2D orthographic views using solid
- extrusion and revolution”, Journal of Materials
- Processing Technology, 152, 291–298, 2004.
- Bhandarkar, M.P., & Nagi, R., “STEP-based
- feature extraction from STEP geometry for agile
- manufacturing”, Computers in Industry, 41, 3-
- , 2000.
- Lockett, H.L., & Guenov, M.D., “Graph-based
- feature recognition for injection moulding based
- on a mid-surface approach”, Computer-Aided
- Design, 37, 251-262, 2005.
- Rezayat, M., “Mid-surface abstraction from 3D
- solid models: general theory and applications”,
- Computer Aided Design, 26(11), 905-915, 1996.
- Gulesin, M., “An intelligent knowledge based
- process planning and fixturing system using the
- STEP Standard”, PhD Thesis, Coventry
- University, 1993.
- Gulesin, M., & Jones, R.M., “Face oriented
- neighbouring graph (FONG): a part representing
- scheme for process planning”, Computer
- Integrated Manufacturing Systems, 7(3), 213-
- , 1994.
- Mehalawi, M., & Miller, R.A., “A database
- system of mechanical components based on
- geometric and topological similarity. Part I:
- representation”, Computer Aided Design, 35, 83-
- , 2003.
- Mehalawi, M., & Miller, R.A., “A database
- system of mechanical components based on
- geometric and topological similarity. Part II:
- indexing, retrieval, matching and similarity
- assessment”, Computer Aided Design, 35, 95-
- , 2003.
- Çiçek, A., “Developing of computer aided part
- recognition system and implementation to engine
- assembly”, PhD Thesis, Gazi University, Turkey,
- -
- Prabhu, B.S., & Pande, S.S., “Intelligent
- interpretation of CADD drawings”, Computers &
- Graphics, 23, 25-44, 1999.
- Prabhu, B.S., Biswas, S., & Pande, S.S.,
- “Intelligent system for extraction of product data
- from CADD models”, Computers in Industry,
- , 79-95, 2001.
- Pal, P., & Kumar, A., “A hybrid approach for
- identification of 3D features from CAD database
- for manufacturing support”, International
- Journal of Machine Tools & Manufacture, 42,
- -228, 2002.
- Pal, P., Tigga, A.M., & Kumar, A., “A strategy for
- machining interacting features using spatial
- reasoning”, International Journal of Machine
- Tools & Manufacture, 45, 269-278, 2005.
- Trappey, A.J.C., & Lai, C.S., “A data
- representation scheme for sheet metal parts:
- expressing manufacturing features and tolerance
- requirements”, Journal of Manufacturing
- Systems, 14(6), 393-405, 1995.
- Lee, J.Y., & Kim, K., “Generating alternative
- interpretations of machining features”,
- International Journal of Advanced
- Manufacturing Technology, 15, 38-48, 1999.
- Lee, J.Y., & Kim, K., “A feature-based approach
- to extracting machining features”, Computer
- Aided Design, 30(13), 1019-1035, 1998.
- Çiçek A, & Gülesin M., “A part recognition based
- computer aided assembly system”, Computers in
- Industry, 58(8-9), 733-746, 2007.
Year 2008,
Volume: 23 Issue: 3, 0 - , 18.02.2013
Abstract
References
- Çiçek, A., Gülesin, M., “Reconstruction of 3D
- models from 2D orthographic views using solid
- extrusion and revolution”, Journal of Materials
- Processing Technology, 152, 291–298, 2004.
- Bhandarkar, M.P., & Nagi, R., “STEP-based
- feature extraction from STEP geometry for agile
- manufacturing”, Computers in Industry, 41, 3-
- , 2000.
- Lockett, H.L., & Guenov, M.D., “Graph-based
- feature recognition for injection moulding based
- on a mid-surface approach”, Computer-Aided
- Design, 37, 251-262, 2005.
- Rezayat, M., “Mid-surface abstraction from 3D
- solid models: general theory and applications”,
- Computer Aided Design, 26(11), 905-915, 1996.
- Gulesin, M., “An intelligent knowledge based
- process planning and fixturing system using the
- STEP Standard”, PhD Thesis, Coventry
- University, 1993.
- Gulesin, M., & Jones, R.M., “Face oriented
- neighbouring graph (FONG): a part representing
- scheme for process planning”, Computer
- Integrated Manufacturing Systems, 7(3), 213-
- , 1994.
- Mehalawi, M., & Miller, R.A., “A database
- system of mechanical components based on
- geometric and topological similarity. Part I:
- representation”, Computer Aided Design, 35, 83-
- , 2003.
- Mehalawi, M., & Miller, R.A., “A database
- system of mechanical components based on
- geometric and topological similarity. Part II:
- indexing, retrieval, matching and similarity
- assessment”, Computer Aided Design, 35, 95-
- , 2003.
- Çiçek, A., “Developing of computer aided part
- recognition system and implementation to engine
- assembly”, PhD Thesis, Gazi University, Turkey,
- -
- Prabhu, B.S., & Pande, S.S., “Intelligent
- interpretation of CADD drawings”, Computers &
- Graphics, 23, 25-44, 1999.
- Prabhu, B.S., Biswas, S., & Pande, S.S.,
- “Intelligent system for extraction of product data
- from CADD models”, Computers in Industry,
- , 79-95, 2001.
- Pal, P., & Kumar, A., “A hybrid approach for
- identification of 3D features from CAD database
- for manufacturing support”, International
- Journal of Machine Tools & Manufacture, 42,
- -228, 2002.
- Pal, P., Tigga, A.M., & Kumar, A., “A strategy for
- machining interacting features using spatial
- reasoning”, International Journal of Machine
- Tools & Manufacture, 45, 269-278, 2005.
- Trappey, A.J.C., & Lai, C.S., “A data
- representation scheme for sheet metal parts:
- expressing manufacturing features and tolerance
- requirements”, Journal of Manufacturing
- Systems, 14(6), 393-405, 1995.
- Lee, J.Y., & Kim, K., “Generating alternative
- interpretations of machining features”,
- International Journal of Advanced
- Manufacturing Technology, 15, 38-48, 1999.
- Lee, J.Y., & Kim, K., “A feature-based approach
- to extracting machining features”, Computer
- Aided Design, 30(13), 1019-1035, 1998.
- Çiçek A, & Gülesin M., “A part recognition based
- computer aided assembly system”, Computers in
- Industry, 58(8-9), 733-746, 2007.
There are 70 citations in total.
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Makaleler |
| Authors | |
| Publication Date | February 18, 2013 |
| Submission Date | February 18, 2013 |
| Published in Issue | Year 2008 Volume: 23 Issue: 3 |