BibTex RIS Cite

FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU

Year 2008, Volume: 23 Issue: 4, 0 - , 18.02.2013

Hakan Aydoğan Faruk Aras

Abstract

Bu çalışmada, Faraday etkili fiber optik akım sensörünü oluşturan polarizör, analizör, lazer, fotodiyot gibi elemanlar Matlab Simulink programı kullanılarak ayrı ayrı modellenmekte ve simüle edilmektedir. Böylece sistemi oluşturan parçaların optimum performansları belirlenebilmektedir. Tüm bu modellerin birleştirilmesiyle, Faraday etkili fiber optik akım sensörünün sistem modeli oluşturulmakta ve çeşitli dinamiklere karşı cevabı incelenmektedir. Elde edilen sonuçlar analiz edilmekte ve değerlendirilmektedir. Daha düşük akımların ölçülmesi için fiberin sarım sayısının artırılması, sistem cevabını geciktirmektedir. Sistemin çıkışı, ışığın kutuplanma açısı ölçüldüğü için lazer optik gücünden etkilenmemektedir.

Keywords

Fiber optik sensor Faraday etkisi modelleme simülasyon.

References

  • 1. Liehr, S., “Optical Measurement of Currents in
  • Power Converters”, Master’s Thesis Project,
  • Microsystem Technology Group School of
  • Electrical Engineering Royal Institute of
  • Technology, Stockholm, 1, (2006).
  • 2. Leung, F.Y.C., Chiu, W.C.K., Demokan, M.S.,
  • “Fiber-Optic Current Sensor Developed for
  • Power System Measurement”, IEEE Internation
  • Conference on Advances in Power System
  • Control, 637, 638, (1991).
  • 3. Tantaswadi, P., “In-Line Sagnac Interferometer
  • Current Sensor”, For the Degree of Doctor of
  • Philosophy, Office of Graduate Studies of Texas
  • A&M University, 1, (1995).
  • 4. Briffod, F., Alasia, D., Thévenaz, L., Cuénoud,
  • G., Robert, P., “Extreme Current Measurements
  • Using A Fibre Optics Current Sensor”, Optical
  • Fiber Sensors Conference Technical Digest, 1,
  • (2002).
  • 5. Ulmer, E.A., “A High-Accuracy Optical
  • Current Transducer for Electric Power System”,
  • IEEE Transactions on Power Delivery, Vol. 5,
  • No. 2, 896, (1990).
  • 6. Schaer, T., Rusnov, R., Eagle, S., Jastrebski, J.,
  • Albanese, S., Fernando, X., “A Dynamic
  • Simulation Model for Semiconductor Laser
  • Diodes”, IEEE CCECE Canadian Conference,
  • , 297, (2003).
  • 7. Cvetković, M., Matavulj, P., Radunović, J.,
  • Marinčić, A., “An InGaAs P-i-N Photodiode
  • Model: Description and Implementations in The
  • Analysis of The 1.55 μm Lightwave System”,
  • Journal of Optical Communications, Vol. XX,
  • No. Y, 2, (2000).
  • 8. Jiao, B., Wang, Z., Liu, F., Bi, W.,
  • “Interferometric Fiber-Optic Current Sensor with
  • Phase Conjugate Reflector”, Proceeding of the
  • IEEE International Conference on
  • Information Acquisition, China, 707, 708, (2006).
  • 9. Özkan, M., “Fiber Optik Kablolar ile İletişim
  • ve Fiber Optik Dalgakılavuzları”, Yüksek lisans
  • tezi, Osmangazi Üniversitesi Fen Bilimleri
  • Enstitüsü, Eskişehir, 10, (1998).
  • 10. Stokes, J.L., Bartsch, R.R., Cochrane, J.C.,
  • Chrien, R.E., Forman, P.J., Looney, L.D.,
  • Tabaka, L.J., Veeser, L.R., “Precision Current
  • Measurements on Pegasus II Using Faraday
  • Rotation”, Pulsed Power Conference, 381,
  • (1995).
  • 11. Kerstetter, P.C., “Models of Optoelectronic
  • Devices Suitable for Electrical Circuit
  • Simulation”, For the Degree of Doctor of
  • Philosophy, Georgia Institute of Technology, 41,
  • , 181, (1998).
  • 12. Si PIN photodiode S5971, S5972, S5973
  • series [online],
  • http://sales.hamamatsu.com/assets/pdf/parts_S/S5
  • _etc.pdf, 2, (Ziyaret tarihi: 04.04.2007).
  • 13. Habibullah, F., Huang, W. P., “A Self-
  • Consistent Analysis of Semiconductor Laser Rate
  • Equations For System Simulation Purpose”,
  • Optics Communications 258, 237, 238, (2006).
  • 14. Fiber Optics [online],
  • http://www.commsplace.com/Knowledge/ITcs/ht
  • ml/tutorials/fibre_optics/introduction_fibre_optic
  • s.htm, (Ziyaret tarihi: 30.04.2008).
  • 15. Reddy, M., “Imbedded Optical Fiber Sensor
  • of Differential Strain And Temperature in
  • Graphite/Epoxy Composites”, For the Degree of
  • Master od Science, Virginia Polytechnic Institute
  • and State University, Virginia, 22, (1986).
  • 16. Rose, A. H., Etzel, S. M. Wang, C. M.,
  • “Verdet Constant Dispersion in Annealed Optical
  • Fiber Current Sensors”, Journal of Lightwave
  • Technology, Vol. 15, No. 5, 806, (1997).
  • 17. Li, H. Y., Crossley, P. A., Aggarwal, R. K.,
  • “Application of Fibre Optical Current Transducer
  • to Protection”, Developments in Power System
  • Protection, IEE, 275, (1997).
  • 18. Gan, K. G., Bowers, J. E., “Measurement of
  • Gain, Group Index, Group Velocity Dispersion,
  • and Linewidth Enhancement Factor of an InGaN
  • Multiple Quantum-Well Laser Diode”, IEEE
  • Photonics Technology Letters, Vol. 16, No. 5,
  • , (2004).

Year 2008, Volume: 23 Issue: 4, 0 - , 18.02.2013

Hakan Aydoğan Faruk Aras

Abstract

References

  • 1. Liehr, S., “Optical Measurement of Currents in
  • Power Converters”, Master’s Thesis Project,
  • Microsystem Technology Group School of
  • Electrical Engineering Royal Institute of
  • Technology, Stockholm, 1, (2006).
  • 2. Leung, F.Y.C., Chiu, W.C.K., Demokan, M.S.,
  • “Fiber-Optic Current Sensor Developed for
  • Power System Measurement”, IEEE Internation
  • Conference on Advances in Power System
  • Control, 637, 638, (1991).
  • 3. Tantaswadi, P., “In-Line Sagnac Interferometer
  • Current Sensor”, For the Degree of Doctor of
  • Philosophy, Office of Graduate Studies of Texas
  • A&M University, 1, (1995).
  • 4. Briffod, F., Alasia, D., Thévenaz, L., Cuénoud,
  • G., Robert, P., “Extreme Current Measurements
  • Using A Fibre Optics Current Sensor”, Optical
  • Fiber Sensors Conference Technical Digest, 1,
  • (2002).
  • 5. Ulmer, E.A., “A High-Accuracy Optical
  • Current Transducer for Electric Power System”,
  • IEEE Transactions on Power Delivery, Vol. 5,
  • No. 2, 896, (1990).
  • 6. Schaer, T., Rusnov, R., Eagle, S., Jastrebski, J.,
  • Albanese, S., Fernando, X., “A Dynamic
  • Simulation Model for Semiconductor Laser
  • Diodes”, IEEE CCECE Canadian Conference,
  • , 297, (2003).
  • 7. Cvetković, M., Matavulj, P., Radunović, J.,
  • Marinčić, A., “An InGaAs P-i-N Photodiode
  • Model: Description and Implementations in The
  • Analysis of The 1.55 μm Lightwave System”,
  • Journal of Optical Communications, Vol. XX,
  • No. Y, 2, (2000).
  • 8. Jiao, B., Wang, Z., Liu, F., Bi, W.,
  • “Interferometric Fiber-Optic Current Sensor with
  • Phase Conjugate Reflector”, Proceeding of the
  • IEEE International Conference on
  • Information Acquisition, China, 707, 708, (2006).
  • 9. Özkan, M., “Fiber Optik Kablolar ile İletişim
  • ve Fiber Optik Dalgakılavuzları”, Yüksek lisans
  • tezi, Osmangazi Üniversitesi Fen Bilimleri
  • Enstitüsü, Eskişehir, 10, (1998).
  • 10. Stokes, J.L., Bartsch, R.R., Cochrane, J.C.,
  • Chrien, R.E., Forman, P.J., Looney, L.D.,
  • Tabaka, L.J., Veeser, L.R., “Precision Current
  • Measurements on Pegasus II Using Faraday
  • Rotation”, Pulsed Power Conference, 381,
  • (1995).
  • 11. Kerstetter, P.C., “Models of Optoelectronic
  • Devices Suitable for Electrical Circuit
  • Simulation”, For the Degree of Doctor of
  • Philosophy, Georgia Institute of Technology, 41,
  • , 181, (1998).
  • 12. Si PIN photodiode S5971, S5972, S5973
  • series [online],
  • http://sales.hamamatsu.com/assets/pdf/parts_S/S5
  • _etc.pdf, 2, (Ziyaret tarihi: 04.04.2007).
  • 13. Habibullah, F., Huang, W. P., “A Self-
  • Consistent Analysis of Semiconductor Laser Rate
  • Equations For System Simulation Purpose”,
  • Optics Communications 258, 237, 238, (2006).
  • 14. Fiber Optics [online],
  • http://www.commsplace.com/Knowledge/ITcs/ht
  • ml/tutorials/fibre_optics/introduction_fibre_optic
  • s.htm, (Ziyaret tarihi: 30.04.2008).
  • 15. Reddy, M., “Imbedded Optical Fiber Sensor
  • of Differential Strain And Temperature in
  • Graphite/Epoxy Composites”, For the Degree of
  • Master od Science, Virginia Polytechnic Institute
  • and State University, Virginia, 22, (1986).
  • 16. Rose, A. H., Etzel, S. M. Wang, C. M.,
  • “Verdet Constant Dispersion in Annealed Optical
  • Fiber Current Sensors”, Journal of Lightwave
  • Technology, Vol. 15, No. 5, 806, (1997).
  • 17. Li, H. Y., Crossley, P. A., Aggarwal, R. K.,
  • “Application of Fibre Optical Current Transducer
  • to Protection”, Developments in Power System
  • Protection, IEE, 275, (1997).
  • 18. Gan, K. G., Bowers, J. E., “Measurement of
  • Gain, Group Index, Group Velocity Dispersion,
  • and Linewidth Enhancement Factor of an InGaN
  • Multiple Quantum-Well Laser Diode”, IEEE
  • Photonics Technology Letters, Vol. 16, No. 5,
  • , (2004).
There are 85 citations in total.

Details

Primary Language Turkish
Journal Section Makaleler
Authors

Hakan Aydoğan This is me

Faruk Aras This is me

Publication Date February 18, 2013
Submission Date February 18, 2013
Published in Issue Year 2008 Volume: 23 Issue: 4

Cite

APA Aydoğan, H., & Aras, F. (2013). FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 23(4).
AMA Aydoğan H, Aras F. FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU. GUMMFD. March 2013;23(4).
Chicago Aydoğan, Hakan, and Faruk Aras. “FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 23, no. 4 (March 2013).
EndNote Aydoğan H, Aras F (March 1, 2013) FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 23 4
IEEE H. Aydoğan and F. Aras, “FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU”, GUMMFD, vol. 23, no. 4, 2013.
ISNAD Aydoğan, Hakan - Aras, Faruk. “FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 23/4 (March 2013).
JAMA Aydoğan H, Aras F. FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU. GUMMFD. 2013;23.
MLA Aydoğan, Hakan and Faruk Aras. “FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, vol. 23, no. 4, 2013.
Vancouver Aydoğan H, Aras F. FİBER OPTİK AKIM SENSÖRÜNÜN MODELLENMESİ VE SİMÜLASYONU. GUMMFD. 2013;23(4).