RÜZGAR TÜRBİNİ İLE SÜRÜLEN ÇİFT ÇIKIŞLI ASENKRON JENERATÖRÜN İNCELENMESİ VE BULANIK MANTIK KONTROL YÖNTEMİYLE MAKSİMUM ÇIKIŞ GÜCÜNÜN ELDE EDİLMESİ
Abstract
Bu çalışmada, değişken hız (senkronaltı ve senkronüstü şaft hızlarında), sabit frekans ve sabit gerilim altında çalışan rüzgar türbini ile sürülen Çift Çıkışlı Asenkron Jeneratörün (ÇÇAJ) kararlı durum karakteristikleri incelenmiştir. Rüzgar türbini ve Çift Çıkışlı Asenkron Jeneratörün matematiksel modelleri zaman ekseninde ayrı ayrı elde edilmiştir. Sabit olmayan rüzgar hızı ve sistem kısıtlamaları düşünülerek, jeneratörden maksimum toplam çıkış gücü elde etmek için bir bulanık mantık denetleyici tasarlanmıştır. Ayrıca, benzetim çalışması sonuçları ile labaratuvar ortamında hazırlanarak yapılan deneysel çalışma sonuçları karşılaştırılmıştır. Çalışmanın sonuçları, bulanık mantık kontrol yöntemi kullanılarak rüzgar türbinine bağlı bir Çift Çıkışlı Asenkron Jeneratöründen maksimum çıkış gücü elde edilebileceğini göstermektedir.
References
- Üçtüğ Y., Eskandarzadeh I., İnce H., “Modeling
- and output power optimization of a wind turbine
- driven double output induction generator” IEE
- Proc.-Electr. Power Appl. Vol. 141, No. 2,
- March 1994
- Natarajan, K., Sharaf. A.M., Sivakumar, S., and
- Naganathan, S., “Modeling and control design for
- Wind energy power conversion scheme using selfexcited
- induction generator’’, IEEE Trans., EC-
- , (3). pp. 506-512, 1987
- Salameh, Z.M., and Kazda, L.F., ‘‘Analysis of the
- steady-state performance of the double output
- induction generator’’, IEEE Trans., EC-1, pp. 26-
- , 1986
- Salameh, Zm., and Kazda, L.F., ‘‘Analysis of the
- double output induction generator using direct
- three-phase model: parts 1 and II’’, IEEE Trans.,
- EC-2, (2). pp. 175-188, 1987
- Brady, F.J.: ‘‘A mathematical model for the
- doubly-fed wound rotor generator’’, IEEE
- Trans., EC-1, (2). pp. 180-183, 1986
- NAKRA, H.L., and DUBE, B., ‘‘Slip power
- recovery induction generators for large vertical
- axis Wind turbines’’. IEEE Trans., EC-3, (4), pp.
- -73, 1988
- Çadirci I.,Ermiş M., “Double-Output Induction
- Generator Operating at Subsynchronous and
- Supersynchronous Speeds: Steady-State
- Performance Optimisation and Wind Energ
- Recovery”, IEE Proceedings-B, Vol.139:pp.429-
- , 1992
- Heier S., Grid Integrtion of Wind Energy
- Conversion System 2nd ed, John Wiley and Sons
- Ltd. pp.106-116 54-65, 230-245, 1998
- Mashaly H.M., Sharaf A.M.,El-Sttar A.A., Mansour
- M.M., “Implementation of Fuzzy Logic Controller
- for Wind Energy Induction Generator D.C. Link
- Scheme”, 3rd IEEE-CCA pp.978-982, 1994
- Chen Z., Arnalte S.G., McCormick M., “A Fuzzy
- Logic Controlled Power Electronic System for
- Variable Speed Wind Energy Conversion
- System”, IEE Conference, pp.114-119, 2000
- V. Galdi, A. Piccolo, P. Siano, “Designing an
- Adaptive Fuzzy Controller for Maximum Wind
- Energy Extraction” IEE Trans. on Energy conv.,
- Vol. 23, No. 2, June 2008
- Hilloowala M., Sharaf Adel M., ‘‘A Rule-Based
- Fuzzy Logic Controller for a PWM Inverter in a
- Stand Alone Wind Energy Conversion Scheme’’,
- IEEE Transactions on Industry Applications,
- vol 32: pp57-65, 1996.
Year 2009,
Volume: 24 Issue: 2, 0 - , 14.02.2013
Abstract
References
- Üçtüğ Y., Eskandarzadeh I., İnce H., “Modeling
- and output power optimization of a wind turbine
- driven double output induction generator” IEE
- Proc.-Electr. Power Appl. Vol. 141, No. 2,
- March 1994
- Natarajan, K., Sharaf. A.M., Sivakumar, S., and
- Naganathan, S., “Modeling and control design for
- Wind energy power conversion scheme using selfexcited
- induction generator’’, IEEE Trans., EC-
- , (3). pp. 506-512, 1987
- Salameh, Z.M., and Kazda, L.F., ‘‘Analysis of the
- steady-state performance of the double output
- induction generator’’, IEEE Trans., EC-1, pp. 26-
- , 1986
- Salameh, Zm., and Kazda, L.F., ‘‘Analysis of the
- double output induction generator using direct
- three-phase model: parts 1 and II’’, IEEE Trans.,
- EC-2, (2). pp. 175-188, 1987
- Brady, F.J.: ‘‘A mathematical model for the
- doubly-fed wound rotor generator’’, IEEE
- Trans., EC-1, (2). pp. 180-183, 1986
- NAKRA, H.L., and DUBE, B., ‘‘Slip power
- recovery induction generators for large vertical
- axis Wind turbines’’. IEEE Trans., EC-3, (4), pp.
- -73, 1988
- Çadirci I.,Ermiş M., “Double-Output Induction
- Generator Operating at Subsynchronous and
- Supersynchronous Speeds: Steady-State
- Performance Optimisation and Wind Energ
- Recovery”, IEE Proceedings-B, Vol.139:pp.429-
- , 1992
- Heier S., Grid Integrtion of Wind Energy
- Conversion System 2nd ed, John Wiley and Sons
- Ltd. pp.106-116 54-65, 230-245, 1998
- Mashaly H.M., Sharaf A.M.,El-Sttar A.A., Mansour
- M.M., “Implementation of Fuzzy Logic Controller
- for Wind Energy Induction Generator D.C. Link
- Scheme”, 3rd IEEE-CCA pp.978-982, 1994
- Chen Z., Arnalte S.G., McCormick M., “A Fuzzy
- Logic Controlled Power Electronic System for
- Variable Speed Wind Energy Conversion
- System”, IEE Conference, pp.114-119, 2000
- V. Galdi, A. Piccolo, P. Siano, “Designing an
- Adaptive Fuzzy Controller for Maximum Wind
- Energy Extraction” IEE Trans. on Energy conv.,
- Vol. 23, No. 2, June 2008
- Hilloowala M., Sharaf Adel M., ‘‘A Rule-Based
- Fuzzy Logic Controller for a PWM Inverter in a
- Stand Alone Wind Energy Conversion Scheme’’,
- IEEE Transactions on Industry Applications,
- vol 32: pp57-65, 1996.
There are 51 citations in total.
Details
| Primary Language | Turkish |
|---|---|
| Journal Section | Makaleler |
| Authors | |
| Publication Date | February 14, 2013 |
| Submission Date | February 14, 2013 |
| Published in Issue | Year 2009 Volume: 24 Issue: 2 |