Theoretical Exergoenvironmental Analysis of a Tunnel Furnace and Drying System in a Brick Production

Year 2024, , 249 - 262, 01.03.2024

Gürhan Tahtalı , Hayati Olgun , Mustafa Güneş , Arif Hepbaşlı

https://doi.org/10.35378/gujs.1052416

Abstract

The performance of a tunnel furnace and a tunnel dryer in a brick production was exergoenvironmentally assessed. The real production data of a brick factory in Turkey with a daily production capacity of 392 tons of fired bricks were used in the analysis. The exergoenvironmental factor of the control volume was calculated as 0.87. The specific exergoenvironmental cost of the control volume was determined to be 559.55 €/h, 3.39 €cent/ kg fired brick and 1.94 €cent/MJ. The specific exergoeconomic cost and the environmental damage prevention cost were obtained to be 0.41 € cent/MJ and 1.53 € cent/MJ, respectively. Because the ratio of exergoenvironmental cost to sales price of 2.41 € cent / kg fired brick was 1.41 (above 1), it was concluded that the brick production in Turkey was not sustainable in terms of exergoenvironmental analysis.

Keywords

Brick production, Tunnel furnace, Tunnel dryer, Exergoenvironmental, Sustainability

Thanks

The authors would like to thank Dev Blok Brick Factory at Turgutlu, Manisa, Turkey for giving permission to gather and use the necessary data in the calculations and analyses.

References

• [1] Dincer, I., and Rosen, M.A., Exergy, Energy, Environment and Sustainable Development. Elsevier, Oxford, Second Edition, (2013).
• [2] Tahtali, G., Olgun, H., Gunes, M. and Hepbasli, A., “Exergy analyses of a tunnel furnace and a tunnel dryer”, International Journal of Exergy, 36(2/3/4): 208-226, (2021).
• [3] Gurturk, M., and Oztop, H.F., “Energy and exergy analysis of a rotary kiln used for plaster production”, Applied Thermal Engineering, 67(1): 554-565, (2014).
• [4] Meyer, L., Tsatsaronis, G., Buchgeister, J., and Schebek, L., “Exergoenvironmental analysis for evaluation of the environmental impact of energy conversion systems”, Energy, 34(1): 75-89, (2009).
• [5] Ding, H., Li, J., and Heydarian, D., “Energy, exergy, exergoeconomic, and environmental analysis of a new biomass-driven cogeneration system”, Sustainable Energy Technologies and Assessments, 45: 1-19, (2021).
• [6] Singh, A., Sarkar, J., and Sahoo, R. R., “Experimentation on solar-assisted heat pump dryer: Thermodynamic, economic and exergoeconomic assessments”, Solar Energy, 208(1): 150–159, (2020).
• [7] Chen, H., Xue, K., Wu, Y., Xu, G., Jin, X., and Liu, W., “Thermodynamic and economic analyses of a solar-aided biomass-fired combined heat and power system”, Energy, 214(1): 1-20, (2021).
• [8] Ahmadi, M.M., Keyhani, A., Kalogirou, S.A., Lam, S.S., Peng, W., Tabatabaei, M., and Aghbashlo, M., “Net-zero exergoeconomic and exergoenvironmental building as new concepts for developing sustainable built environments”, Energy Conversion and Management, 244(1): 1-16, (2021).
• [9] https://www.ecocostsvalue.com/eco-costs/eco-costs-emissions. Access date: 18.10.2021
• [10] Ozkan, A., Gunkaya, Z., Tok, G., Karacasulu, L., Metesoy, M., Banar, M., and Kara, A., “Life cycle assessment and life cycle cost analysis of magnesia spinel brick production”, Sustainability, 8(662): 1-13, (2016).
• [11] Abbakumov, V.G., “Exergy analysis of tunnel kilns”, Refractories, 16(9–10): 555-565, (1975).
• [12] Hepbasli, A., “A study on estimating the energetic and exergetic price of various residential energy sources”, Energy and Buildings, 40(1): 308–315, (2008).
• [13] Modinger, F., “Sustainable clay brick production-A case study”, The 2005 World Sustainable Building Conference, Tokyo, (2005).
• [14] Yuksek, I., Karaman Oztas, S., and Tahtali, G., “The evaluation of fired clay brick production in terms of energy efficiency: a case study in Turkey”, Energy Efficiency, 13: 1473-1483, (2020).
• [15] Croitoru, L., and Sarraf, M., “Benefits and costs of the informal sector: The case of brick kilns in Bangladesh”, Journal of Environmental Protection, 3(1): 476-484, (2012).
• [16] Balli, O., “Thermodynamic, thermoeconomic and environmental performance analyses of a high bypass turbofan engine used on commercial aircrafts”, Sakarya University Journal of Science, 23(3): 453-461, (2019).
• [17] Bejan, A., Tsatsaronis, G., and Moran, M., Thermal Design and Optimization, John Wiley and Sons, NJ, (1996).
• [18] Balli, O., and Hepbasli, A., “Exergoeconomic, sustainability and environmental damage cost analyses of T56 turboprop engine”, Energy, 64(1): 582-600, (2014).