The Current-Voltage Characteristics for Electrode Geometry Model of Positive DC Corona Discharge in Air

Year 2022, Volume: 35 Issue: 3, 1140 - 1150, 01.09.2022

Asep Yoyo Wardaya , Zaenul Muhlisin , Jatmiko Endro Suseno , Muhammad Nur , Pandji Triadyaksa , Ali Khumaeni , Eko Sarwoko , Jaka Windarta , Susilo Hadi

https://doi.org/10.35378/gujs.885345

https://izlik.org/JA73BT38FD

Abstract

Research on corona plasma discharges from plasma reactors has been carried out using the Point and Semicircular-Plane (PSC-P) electrode configuration in the air. The purpose of this study is to compare the suitability level of the current-voltage (I-V) characteristics curve from the results of experimental data and numerical simulation calculations of the electrode geometry function based on the variation of three electrode configuration sizes (small plate, medium plate, and large plate) and two variations of the distance between the two electrodes in each electrode configuration size. The results of the study prove that there is a high degree of conformity between numerical calculations with experimental data through calculations from the Python GUI Programming by taking a fitting value from the certain k-shape sharpness factor. The calculation location of the k-shape sharpness factor lies on the electrode tip sharp surface which will produce the largest plasma flow in the plasma reactor equipment.

Keywords

Corona discharge , (I-V) characteristics curve , PSC-P , Python GUI Programming , k-shape sharpness factor

Supporting Institution

non-tax revenue (PNBP), Diponegoro University

Project Number

1983/UN7.5.8/PP/2020

References

• [1] Allen, J., “The plasma-sheath boundary: Its history and Langmuir's definition of the sheath edge”, Plasma Sources Science and Technology, 18(1): 014004, (2008).
• [2] Stambouli, A. B., Benallal, R., Oudini, N., Mesli, S. M., Tadjine, R., “Control of Dual Frequency Capacitively Coupled Plasma via blocking capacitor and phase angle”, The European Physical Journal Applied Physics, 80 (1): 10802 (2017).
• [3] Saikia, P., Bhuyan, H., Escalona, M., Favre, M., Wyndham, E., Maze, J., Schulze, J., “Study of dual radio frequency capacitively coupled plasma: an analytical treatment matched to an experiment”, Plasma Sources Science and Technology, 27(1): 015014, (2018).
• [4] van Veldhuizen, E. M., Rutgers, W. R., “Corona Discharges: Fundamental and Diagnostics”, Frontiers in low temperature plasma diagnostics IV: papers, Rolduc Conference Centre, The Netherlands, 40-49, (2001).
• [5] Dau, V. T., Dinh, T. X., Terebessy, T., Bui, T. T., “Bipolar corona discharge based air flow generation with low net charge”, Journal of Electrostatics, A, 244: 146 – 155, (2016).
• [6] Guan, Y., Vaddi, R. S., Aliseda, A., Novosselov, I., “Analytical model of electro-hydrodynamic flow in corona discharge”, Physics of Plasmas, 25(8): 083507, (2018).
• [7] Robinson, M., “Convective Heat Transfer at The Surface of A Corona Electrode”, International Journal of Heat and Mass Transfer, 13: 263-274, (1970).
• [8] Robinson, M., “Movement of air in the electric wind of the corona discharge”, Transactions of the American Institute of Electrical Engineers, Part I: Communication and Electronics, 80: 143–150, (1961).
• [9] Robinson, M., “A History of the Electric Wind”, American Journal of Physics, 30: 366-372, (1962).
• [10] Robinson, M., “Turbulent Gas Flow and Electrostatic Precipitation”, Journal of the Air Pollution Control Association, 18(4): 235-239, (1968).
• [11] Bush, J.R., Feldman, P.L., Robinson, M., “High Temperature, High Pressure Electrostatic Precipitation”, Journal of the Air Pollution Control Association, 29(4): 365-371, (1979).
• [12] Townsend, J. S., "The potentials requires to maintain currents between coaxial cylinders", Philosophical Magazine (London), 28: 83-90, (1914).
• [13] Dobranszky, J., Bernath, A., Marton, H., “Characterisation of the plasma shape of the TIG welding arc”, International Journal of Microstructure and Materials Properties, 3(1): 126-140, (2008).
• [14] Ferreira, G. F. L., Oliveira Jr., O. N., Giacometti, J. A., “Point‐to‐plane corona: Current‐voltage characteristics for positive and negative polarity with evidence of an electronic component”, Journal of Applied Physics, 59: 3045, (1986).
• [15] Zheng, Y., Zhang, B., He, J., “Current-voltage characteristics of dc corona discharges in air between coaxial cylinders”, Physics of Plasmas, 22: 023501, (2015).
• [16] Robinson, M., “The Corona Threshold for Coaxial Cylinders in Air at High Pressures”, IEEE Transactions on Power Apparatus and Systems, Pas-86: 2, (1967).
• [17] Goulden, C. H. “Methods of statistical analysis”, USA: John Wiley & Sons, (1949).
• [18] Taylor, J. “Introduction to error analysis, the study of uncertainties in physical measurements”, second edition, California: University Science Books, (1997).