Chemical and Electrochemical Study of Effect of Soluble Sulfonated Polystyrene on Mild Steel Interface in Hydrochloric Acid Solution

Abstract

The author has focused on the corrosive effect of 0.14% carbon steel in the occurrence of several amounts of soluble Sulfonated Polystyrene (SPS) and was found to be best efficient on soft iron exterior at 100ppm concentration in 0.5M hydrochloric acid assortment at 298K heat during 3h of time in this paper. The examination was performed by studying the weight loss of mild steel by varying different parameters like mixture concentration, time, and solution temperature. The efficiency of SPS was observed to rise with an increase of 91.90% of an inhibitor in the acid solution. The mechanism of physical adsorption was studied to the initiation and permitted dynamics for the reaction of altitude and extracted taking place towards the exterior of the iron sample in endothermic, impulsive and dependable through the Langmuir isotherm adsorption. Anodic and cathodic both type of nature of soluble SPS was studied using the potentiodynamic polarization method. The AFM analysis was used to do the surface and protective film analysis and under varied settings, SPS polymer inhibitor proven to be more suited for iron metal exterior.

Keywords

• Corrosion Inhibitor
• Electrochemical method
• Mild steel
• Polystyrene
• Potentiodynamic polarization method

References

1. [1] Srimathi, M., Rajalakshmi, R., and Subhashini S., “Polyvinyl alcohol-sulphanilic acid water soluble composite as corrosion inhibitor for mild steel in hydrochloric acid medium”, Arabian Journal of Chemistry, 7(5): 647–656, (2014). DOI: https://doi.org/10.1016/j.arabjc.2010.11.013.
2. [2] https://nptel.ac.in/content/storage2/courses/113108051/module1/lecture1.pdf. Access date: 12.02.2018.
3. [3] Umoren, S.A., “Polymers as Corrosion Inhibitors for Metals in Different Media - A Review”, The Open Corrosion Journal, 2(1): 175–188, (2009). DOI: https://doi.org/10.2174/1876503300902010175.
4. [4] Chigondo, M., and Chigondo, F., “Recent Natural Corrosion Inhibitors for Mild Steel: An Overview”, Journal of Chemistry, 2016: 1-7, (2016). DOI: https://doi.org/10.1155/2016/6208937.
5. [5] A. Ismail, “A review of Green Corrosion Inhibitor for mild steel in seawater”, ARPN Journal of Engineering and Applied Sciences, Sci., 11(14): 8710–8714, (2016).
6. [6] Raja, P.B., Ismail, M., Ghoreishiamiri, S., Mirza, J., Ismail, M.C., Kakooei, S., and Rahim, A.A., “Reviews on Corrosion Inhibitors: A Short View”, Chemical Engineering Communications, ISSN: 203(9): 1145–1156, (2016). DOI: https://doi.org/10.1080/00986445.2016.1172485.
7. [7] Ramya, K., and N. Muralimohan. “Study on Corrosion Inhibitor in Mild Steel by Various Habitual Plant Extract – Review” International Journal of Chemical Concepts, 2(2): 70–75, (2016).
8. [8] Abdul Rahiman, A.F.S., and Sethumanickam, S., “Corrosion inhibition, adsorption and thermodynamic properties of poly(vinyl alcohol-cysteine) in molar HCl”, Arabian Journal of Chemistry, 10: S3358–S3366: (2017). https://doi.org/10.1016/j.arabjc.2014.01.016.

9. [9] Revie, R. Winston, and Herbart, H. Uhling, “Corrosion and Corrosion Control: An Introduction to Corrosion Science and Engineering”, 4th ed., John Wiley & Sons, Inc., Hoboken, New Jersey, 479, (2008).
10. [10] Yang, F., Li, X., Qiu, S., Zheng, W., Zhao, H., and Wang, L., “Water soluble trianiline containing polyurethane (TAPU) as an efficient corrosion inhibitor for mild steel”, International Journal of Electrochemical Science, 12(6): 5349–5362, (2017). DOI: https://doi.org/10.20964/2017.06.53.
11. [11] Ji, G., Shukla, S.K., Dwivedi, P., Sundaram, S., Ebenso, E.E., and Prakash, R., “Green Capsicum annuum fruit extract for inhibition of mild steel corrosion in hydrochloric acid solution”, International Journal of Electrochemical Science, 7(12): 12146-14158, (2012).
12. [12] Shukla, S.K., and Ebenso, E.E, “Effect of condensation product of thiosemicarbazide and phenyl isothiocynate on corrosion of mild steel in sulphuric acid medium”, International Journal of Electrochemical Science, 7(12): 12134–12145, (2012).
13. [13] Faiz, M., Zahari, A., Awang, K., and Hussin, H., “Corrosion inhibition on mild steel in 1 M HCl solution by: Cryptocarya nigra extracts and three of its constituents (alkaloids)”, RSC Advances., 10(11): 6547–6562, (2020). DOI: https://doi.org/10.1039/c9ra05654h.
14. [14] Umoren, S.A., and Solomon, M.M., “Recent Developments on the Use of Polymers as Corrosion Inhibitors - A Review”, The Open Materials Science Journal, 8: 39-54, (2014).
15. [15] Wranglen, G. “An Introduction to Corrosion and Protection of Metals” Anti-Corrosion Methods and Materials, 19(11): 1-5, (1972). DOI: 10.1108/eb006887.
16. [16] Fathima Sabirneeza, A.A., Geethanjali, R., and Subhashini, S., “Polymeric Corrosion Inhibitors for Iron and Its Alloys: A Review”, Chemical Engineering Communications, 202(2): 232-244, (2015). DOI: https://doi.org/10.1080/00986445.2014.934448.
17. [17] Chakravarthy, M.P., and Mohana, K.N., “Adsorption and corrosion inhibition characteristics of some nicotinamide derivatives on mild steel in hydrochloric acid solution”, ISRN Corrosion, 2014: 1-13, (2014). DOI: https://doi.org/10.1155/2014/687276.
18. [18] Oukhrib, R., Ibrahimi, B. El., Bourzi, H., Mouaden, K. El., Jmiai, A., Issami, S. El., Bammou, L., and Bazzi, L., “Quantum chemical calculations and corrosion inhibition efficiency of biopolymer “chitosan” on copper surface in 3%NaCl”, Journal of Materials and Environmental Science, 8(1): 195-208, (2017).
19. [19] Fidrusli, A., Suryanto, and Mahmood, M., “Ginger extract as green corrosion inhibitor of mild steel in hydrochloric acid solution,” ICAMME 2017, 8–9 August 2017, Kuala Lumpur, Malaysia, IOP Conference Series: Materials Science and Engineering, 290(1): 1–6, (2017). DOI: 10.1088/1757-899X/290/1/012087.
20. [20] Shukla, S.K., Singh, A.K., Murulana, L.C., Kabanda, M.M., and Ebenso, E.E., “Inhibitive effect of azorubine dye on the corrosion of mild steel in hydrochloric acid medium and synergistic iodide additive”, International Journal of Electrochemical Science, 7(6): 5057-5068, (2012).
21. [21] Shukla, S.K., and Quraishi, M.A., “Effect of some substituted anilines-formaldehyde polymers on mild steel corrosion in hydrochloric acid medium”, Journal of Applied Polymer Science, 124(7): 5130-5137, (2011). DOI: https://doi.org/10.1002/app.35668.
22. [22] Shukla, S.K., “Corrosion inhibitive effect of N- ( 6-methoxyquinolin-8-yl ) -pentane-1 , 4- diamine on mild steel / sulphuric acid solution interface”, Journal of Materials and Environmental Science, 6(6): 1779–1786, (2015).
23. [23] Tiu, B.D.B., and Advincula, R.C., “Polymeric corrosion inhibitors for the oil and gas industry: Design principles and mechanism”, Reactive and Functional Polymers, 95: 25–45, (2015). DOI: https://doi.org/10.1016/j.reactfunctpolym.2015.08.006.
24. [24] Finšgar, M., and Jackson, J., “Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A review”, Corrosion Science, 86: 17–41, (2014). DOI: https://doi.org/10.1016/j.corsci.2014.04.044.
25. [25] Alsingery, R.M.D., “Polypyrrole as a Perfect Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution Cyclic Voltammetry”, International Journal of ChemTech Research, 10(9): 1058-1065, (2017).
26. [26] Dwivedi, A., Bharti, P.K., and Shukla, S.K., “Surface assimilation and corrosion inhibition characteristic of water soluble Polyvinyl Alcohol on mild steel surface in 0.5M HCl solution”, Journal of the Turkish Chemical Society Section A: Chemistry, 8(1): 219-230, (2021). DOI: https://doi.org/10.18596/jotcsa.794721.
27. [27] Dwivedi, A., Bharti, P.K., and Shukla, S.K., “Interaction of water soluble polyacrylic acid with mild steel / hydrochloric acid interface,” ICCRME-2018, 6–7 April 2018, Lucknow, India, IOP Conference Series: Materials Science and Engineering, 404(1): 1–11, Sep. (2018). DOI: 10.1088/1757-899X/404/1/012044.
28. [28] Kruger, J., “Cost of Metallic Corrosion”, Uhlig’s Corros. Handbook, Edited by R. Winston Revie, 3rd ed., John Wiley & Sons, Inc., United States, 15-20, (2011). DOI: https://doi.org/10.1002/9780470872864.ch2.
29. [29] Singh, A.K., Shukla, S.K., Singh, M., and Quraishi, M.A., “Inhibitive effect of ceftazidime on corrosion of mild steel in hydrochloric acid solution”, Materials Chemistry and Physics, 129(1-2): 68-79, (2011). DOI: https://doi.org/10.1016/j.matchemphys.2011.03.054.
30. [30] Holboke, Andrea E., and Pinnell, Robert P., “Sulfonation of polystyrene: Preparation and characterization of an ion exchange resin in the organic laboratory” Journal of Chemical Education, 66(7): 613-614, (1989). DOI: https://doi.org/10.1021/ed066p613.
31. [31] Ngadiwiyana, Ismiyarto, Gunawan, Purbowatiningrum, R.S., Prasetya, N.B.A., Kusworo, T.D., and Susanto, H., “Sulfonated polystyrene and its characterization as a material of electrolyte polymer”, ISNPINSA-7, 17 October 2017, Semarang, Indonesia, Journal of Physics: Conference Series, 1025(1), 1–7, May (2018). DOI: 10.1088/1742-6596/1025/1/012133.
32. [32] Kabanda, M.M., Shukla, S.K., Singh, A.K., Murulana, L.C., and Ebenso, E.E., “Electrochemical and quantum chemical studies on calmagite and fast sulphone black f dyes as corrosion inhibitors for mild steel in hydrochloric medium”, International Journal of Electrochemical Science, 7(9): 8813-8831, (2012).
33. [33] Wang, X., and Xing, J., “Polystyrene sulfonic acid-doped polypyrrol (dppy) as a corrosion inhibitor for carbon steel in 1.0 M HCl solution”, International Journal of Electrochemical Science, 15(2): 1606-1621, (2020). DOI: https://doi.org/10.20964/2020.02.46.
34. [34] Singh, Ajay K., “Microbially Induced Corrosion and its Mitigation”, 1st ed., Springer Nature, Singapore, 129, (2020). DOI: https://doi.org/10.1007/978-981-15-8019-2. [35] Kumar S.A., Kumar A.S., and Kumar S.R., “Corrosion Inhibition of Mild Steel in 0.5 M H2So4 by 1-(2- Methyl-4-(2-Methylphenyldiazenyl) Phenyl) Azonapthalen-2-Ol.”, American Journal of Engineering Research, 02(09): 17–22, (2013).
35. [36] Shukla, S.K, Murulana, L.C., and Ebenso. E.E., “Inhibitive effect of imidazolium based aprotic ionic liquids on mild steel corrosion in hydrochloric acid medium”, International Journal of Electrochemical Science, 6(9): 4286–95, (2011).
36. [37] Shukla, S.K., Quraishi, M.A., and Prakash, R., “A self-doped conducting polymer polyanthranilic acid, An efficient corrosion inhibitor for mild steel in acidic solution”, Corrosion Science, 50(10): 2867–2872, (2008). DOI: https://doi.org/10.1016/j.corsci.2008.07.025.
37. [38] Alaoui, L.M., Hammouti, B., Bellaouchou, A., Benbachir, A., Guenbour, A., and Kertit S., “Corrosion inhibition and adsorption properties of 3-amino-1, 2, 3-triazole on mild steel in H3PO4”, Der Pharma Chemica, 3(4): 353–60, (2011).
38. [39] Shukla, S.K., Singh, A.K., Ahamad, I., and Quraishi M.A., “Streptomycin: A commercially available drug as corrosion inhibitor for mild steel in hydrochloric acid solution”, Materials Letters, 63(9–10): 819–22, (2009). DOI: https://doi.org/10.1016/j.matlet.2009.01.020.
39. [40] Pereiraa, J.D. dos S., Jannyely M. Neria, Emerencianoa, D.P., Freitasa, G.R.S. de, Felipeb, M.B.M.C, Souzaa, M.Â.F. de, Menezesa, F.G., and Maciel, M.A.M., “Experimental and theoretical analysis of an oxazinoquinoxaline derivative for corrosion inhibition of AISI 1018 steel”, Quimica Nova, 41(3): 243–250, (2018). DOI: https://doi.org/10.21577/0100-4042.20170171.
40. [41] Singh, A.K., Shukla, S.K., and Quraishi, M.A., “Corrosion Behaviour of Mild Steel in Sulphuric Acid Solution in Presence of Ceftazidime”, International Journal of Electrochemical Science, 6: 5802–5814, (2011).
41. [42] Rahmani, H., and Meletis, E.I., “Corrosion Inhibition of Brazing Cu-Ag Alloy with 1,2,3-Benzotriazole and 2,5-Dimercapto-1,3,4-Thiadiazole”, Corrosion, 77(1): 29–39, (2021). DOI: https://doi.org/10.5006/3642.
42. [43] Shukla, M.A., and Quraishi, M.A., “Cefotaxime sodium: A new and efficient corrosion inhibitor for mild steel in hydrochloric acid solution”, Corrosion Science, 51(5): 1007–1011, (2009). DOI: https://doi.org/10.1016/j.corsci.2009.02.024.
43. [44] Shukla, S.K., and Ebenso, EE.., “Corrosion inhibition, adsorption behavior and thermodynamic properties of streptomycin on mild steel in hydrochloric acid medium”, International Journal of Electrochemical Science, 6(8): 3277–3291, (2011).
44. [45] Ameh, Paul O., and Nnabuk O. Eddy, “Theoretical and Experimental Studies on the Corrosion Inhibition Potentials of 3-Nitrobenzoic Acid for Mild Steel in 0.1 M H2SO4.”, Cogent Chemistry, 2(1): 1–18, (2016). DOI: 10.1080/23312009.2016.1253904.
45. [46] Shukla, S.K., and Quraishi, M.A., “Ceftriaxone: A novel corrosion inhibitor for mild steel in hydrochloric acid”, Journal of Applied Electrochemistry, 39: 1517–1523, (2009). DOI: https://doi.org/10.1007/s10800-009-9834-1.
46. [47] Hussin, M.H., Rahim, A.A., Mohamad Ibrahim, M.N., and Brosse, N., “Improved corrosion inhibition of mild steel by chemically modified lignin polymers from Elaeis guineensis agricultural waste”, Materials Chemistry and Physics, 163: 201–212, (2015). DOI: https://doi.org/10.1016/j.matchemphys.2015.07.030.
47. [48] Yasakau, K., “Application of AFM-Based Techniques in Studies of Corrosion and Corrosion Inhibition of Metallic Alloys”, Corrosion and Materials Degradation, 1: 345–372, (2020). DOI: https://doi.org/10.3390/cmd1030017.
48. [49] Martin, F. A., Cousty, J., Masson, J. L., and Bataillon C., “In Situ AFM Study of Pitting Corrosion and Corrosion under Strain on a 304L Stainless Steel”, long term prediction and modeling of corrosion, France, 12-16 Sep 2004, Eurocorr 2004, 1–10, (2004).
49. [50] Kannan, P., Shukla, S.K., Rao, T.S., and Rajendran, N., “Adsorption, thermodynamic and quantum chemical studies of 3-(4-Chlorobenzoylmethyl)benzimidazoliumbromide in inhibition effect on carbon steel”, Journal of Materials and Environmental Science, 7:1154–1171, (2016).
50. [51] Sabirneeza, A.A.F., and Subhashini, S., “Poly(vinyl alcohol–proline) as corrosion inhibitor for mild steel in 1M hydrochloric acid”, International Journal of Industrial Chemistry, 5:111–120, (2014). DOI: https://doi.org/10.1007/s40090-014-0022-8.
51. [52] Umoren, S.A., and Eduok, U.M., “Application of carbohydrate polymers as corrosion inhibitors for metal substrates in different media: A review”, Carbohydrate Polymers, 140: 314–341, (2016). DOI: https://doi.org/10.1016/j.carbpol.2015.12.038.
52. [53] http://www.metrohm-autolab.com/download/Applicationnotes/Autolab_Application_Note_COR03.pdf. Access date: 09.05.2019.
53. [54] Finšgar, M., and Milošev, I., “Inhibition of copper corrosion by 1,2,3-benzotriazole: A review”, Corrosion Science, 52: 2737–2749, (2010). DOI: https://doi.org/10.1016/j.corsci.2010.05.002.
54. [55] Shanmughan, S.K., Kakkassery, J.T., Raphael, V.P., and Kuriakose, N., “Electrochemical and AFM studies on adsorption behavior of a Polynuclear Schiff Base at carbon steel in HCl medium”, Current Chemistry Letters, 4: 67–76, (2015). DOI: https://doi.org/10.5267/j.ccl.2015.2.001.