FUZZY PI CONTROL WITH PARALLEL FUZZY PD CONTROL FOR AUTOMATIC GENERATION CONTROL OF A TWO-AREA POWER SYSTEM

Abstract

This paper presents an efficient method based on a modified fuzzy PI control with parallel fuzzy PD (fuzzy-PI+ fuzzy-PD) control for automatic generation control (AGC) of a two-area power system. This paper describes the control schemes required to operate the two-area power system in the steady state. The model of a two-area power system is established using the equations describing dynamic behavior of a two-area power system and control schemas in Matlab-Simulink program respectively. In this paper, typical responses to real power demand are illustrated using the latest simulation technique available by the MATLAB/SIMULINK program. Results of simulation show that the proposed a modified fuzzy-PI+fuzzy-PD control offers better performance than PID controllers at different operating conditions.

Keywords: Fuzzy PI control with parallel fuzzy PD control, automatic generation control, Power Systems,Matlab/Simulink

 

Keywords

• Fuzzy PI control with parallel fuzzy PD control, automatic generation control, Power Systems, Matlab/Simulink

References

1. Allen E., White N.La, Yoon Y., Chapman J. and Ilic M., “Interactive Object-Oriented Simulation of Interconnected Power Systems Using SIMULINK” IEEE Transactions on Education, 44(1): 87-95 (2001).
2. Kundur P., Power system stability and control, McGraww-Hill (1994).
3. Saadat H., Power System Analysis, McGraw-Hill, New York (1999).
4. Khodabakhshian A., Hooshmand R. “A new PID controller design for automatic generation control of hydro power systems” Electrical Power and Energy Systems 32, 375–382 (2010).
5. Sabahi K., Teshnehlab M., Shoorhedeli M.A., “Recurrent fuzzy neural network by using feedback error learning approaches for LFC in interconnected power system” Energy Conversion and Management 50: 938–946 (2009).
6. Lu C-F, Liu C-C, Wu C., “Effect of battery energy storage system on load frequency control considering governor deadband and generation rate constraints” IEEE Trans Power Syst 10(3):555–61 (1995).
7. Cavin JK, Budge MC, Rosmunsen P. “An optimal linear system approach to load-frequency Control” IEEE Trans Power Apparatus Syst, PAS-90:2472–82 (1971).
8. Ai-Homouz ZM, Abdel-Magid YL. “Variable structure load frequency controllers for multiarea power systems”, Int J Electr Power Energy Syst, 15(5):293–300 (1993).

9. Chang CS, Fu W, “Area load frequency control using fuzzy gain scheduling of PI controllers”, Electr Power Syst Res, 42:145–52 (1997).
10. Hiyama T., “Application of rule based stabilizing controller to power systems”, IEE Proc C 136:175–81 (1989).
11. Dash PK, Liew AC, Mishra BR, “An adaptive PID stabilizer for power systems using fuzzy Logic”, Electr Power Syst Re, :213–22 (1998).
12. Kumar A, Malik OP, Hope GS., “Variable structure system control applied to AGC of an interconnected power system”, IEE Proc, 132(C-1):23–9 (1985).
13. Zribi M, Al-Rashed M, Alrifai M., “Adaptive decentralized load frequency control of multi-area power systems”, Int J Electr Power Energy Syst, 27:573–83 (2005).
14. Chen G., “Conventional and Fuzzy PID Controller: an overview”, Int. J. Intell. Control Systems, 1:235-246 (1996).
15. Malki H.A., Li H., Chen G., “New Design and Stability Analysis of Fuzzy Proportional Derivative Control System”, IEEE Trans.Fuzzy System, 245-254 (1994).
16. Wang L.X., A Course in Fuzzy System and Control, Englewood Cliffs, NJ: Prentice-Hall, (1997).
17. G.K.I. Mann, B.G.Hu and R.G.Gosine, “Analysis of direct action fuzzy PID controller structures”, IEEE Trans.Syst., Man, Cybern. 29(3)371-388 (1999).
18. Abraham R. J., Das D. and Patra A., “Automatic generation control of an interconnected hydrothermal power system considering superconducting magnetic energy storage”, International Journal of Electrical Power & Energy Systems, 29(8):574-579 (2007).
19. Bergen A.R., Power System Analysis, Prentice Hall, Second Edition, New Jersey (2000).
20. Iracleous D.P. and Alexandridis A.T., “A Multi-Task Automatic Generation Control For Power Regulation”, Electric Power Systems Research, 73(3):275-285 (2005).
21. Quao W. Z., Mizumoto M., “PID type fuzzy controller and parameter adaptive method”, Fuzzy Sets Sys,. 78:23-25 (1996).
22. Bhattacharya S., Chatterjee A. and Munshi S., “A new self-tuned PID-type fuzzy controller and a combination of two-term controllers”, ISA Transactions, (43)3:413- 426 (2004).
23. Mann G.K.I., Gosine R.G., “Three-dimensional min– max-gravity based fuzzy PID inference analysis and tuning”, Fuzzy Sets and Systems, 156(2): 300-323 (2005).
24. Li H.X., Gatland H.B., “Conventional fuzzy control and its enhancement”, IEEE Trans.Syst., Man Cybern, 26:791-797 (1996).
25. Malki H.A., Feigenspan D., Misir D., Chen G., “ Fuzzy PID control of a flexible joint robot arm with uncertainties for time-varying load”, IEEE Trans. Control System Technol., 371-378 (1997).