OPTIMIZATION OF MQL PARAMETERS USING THE TAGUCHI METHOD IN MILLING OF WASPALOY

Year 2017, Volume: 30 Issue: 2, 173 - 186, 19.06.2017

Çağrı Vakkas Yıldırım Turgay Kıvak Fehmi Erzincanlı İlyas Uygur Murat Sarıkaya

Abstract

This study aimed to investigate the effect of the minimum quantity lubrication (MQL) parameters such as cutting oil type, flow rate, milling method, pulverization distance and nozzle type on average roughness (Ra) in milling of nickel based Waspaloy super alloy. During milling experiments, constant cutting speed (45 m/min), constant feed rate (0.1 mm/rev) and constant depth of cut (0.5 mm) selected were as machining parameters. Four different types of oil (vegetable, synthetic, mineral and mineral-synthetic), four different flow rates (25, 50, 75 and 100 ml/h), two different milling methods (down milling and up milling) two pulverization distances (25 and 50 mm) and two different nozzle types were selected as MQL parameters. The results were analyzed using 3D surface graphs, signal-to-noise ratio (S/N) and main effect graphs of means. Optimal operating parameters were determined using the S/N ratio and desirability function analysis. Mathematical models have been created for surface roughness. The analysis results indicated that the feed rate was the dominant factors oil type and flow ratio on surface roughness.  In addition, confirmation test results showed that the Taguchi method was very successful in the optimization of MQL parameters in order to obtain minimum surface roughness in milling of Waspaloy super alloy.

Keywords

Waspaloy, Milling, MQL, Surface Roughness, Optimization

References

• Chouldhury, I. A., “Machinability studies of high strength materials and the development of a data base system”, PhD thesis, Dublin City University, (1995).
• Caruso, S., Imbrogno, S., Rinaldi S. and Umbrello, D., “Finite element modeling of microstructal changes in waspaloy dry Machining”, The International Journal of Advanced Manufacturing Technology, (2016).
• Kulawinski, D, Henkel, S, Biermann, H, Holländer, D., Thiele, M., Gampe, U., “Isotermal and thermo-mechanical fatigue beyavior of the nickel base superalloy Waspaloy under unaxial and biaxial-planar loading”, International Journal of Fatigue, Volume 81, 21-36, (2015).
• Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P., Yue, S., “Analysis of integrity and microstructure of linear friction welded Waspaloy”, Materials Characterization, Volume 104, 149-161, (2015).
• Uzun G., Turgut, Y., “The İnvestigation of The Cutting Parameters on Apllied Filled Welds on DIN 1.2344 and DIN 1.2379 Tool Steels in Milling”, 4th International Conference on Welding Technologies and Exhibition (ICWET’16), 11-13 May, Gaziantep-TURKEY, (2016).
• Yıldırım, Ç.V., Kivak, T., Sarikaya, M., Mert, Ş., “Investigation of The Effect on Surface Roughness of The Minimum Quantity Lubrication (MQL) Parameters in Turning of AISI 4340”, 7th International Symposium on Machining, 3-5 November, İstanbul, (2016).
• Lawal, S. A., Choudhury, I. A., Nukman, Y., “Application of vegetable oil-based metalworking fluids in machining ferrous metals; A Review”, Int. J. Mach. Tool. Manu. 52 (1), 1-12, (2012).
• Razak, N. H., Rahman, M. M., Noor, M.M., Kadirgama K., “A Revıew Of Mınımum Quantıty Lubrıcant On Machınıng Performance”, National Conference in Mechanical Engineering Research and Postgraduate Students, FKM Conference Hall , UMP, Kuantan, Pahang, Malaysia ; pp. 72 -85, (2010).
• Jurko, J., Panda, A., “Application of vegetable oil-based metalworking fluids in machining ferrous metals-A review,” International Journal of Machine Tools and Manufacture, vol. 52, no. 1 , pp. 1 12, (2012).
• Yıldırım, Ç. V., Kıvak, T., Erzincanlı, F., “A Rewiew on Application of Milling and Turning Processes of Minimum Quantity Lubrication System”, 2. International Iron and Steels Symposium, Karabük, Türkey, (2015).
• Sharma, V. S., Manu, D., Suri, N. M., “Cooling techniques for improved productivity in turning”, Int. J. Mach. Tool. Manu., 49 (6), 435-453, (2009).
• Dilipak. H., Guldas, A., Gezgin, A., “An Investigation of the Number of Inserts Effect on the Machining Time and Metal Removal Rate During the Milling of AISI D3 Steel at High Cutting Speeds”, Journal of Mechanical Engineering 557-8, 438-443, (2009).
• Bollig, P., Faltin, C., Schießl, R., Schneider, J., Maas, U., Schulze, V., “Considering the influence of minimum quantity lubrication for modelling changes in temperature”, forces and phase transformations during machining, 15th CIRP Conference on Modelling of Machining Operations, Procedia CIRP 31,142 – 147, (2015).
• Bhowmick, S., Alpas, A. T., “The role of diamond-like carbon coated drills on minimum quantity lubrication drilling of magnesium alloys”, Surface & Coatings Technology 205, 5302-5311, (2011).
• Yıldırım, Ç. V., Kıvak, T., Erzincanlı, F., “A Rewiew on Application of Drilling and Grinding Processes of Minimum Quantity Lubrication System”, 6th National Symposium on Machining, İstanbul, (2015).
• Braga, D. U., Diniz, A. E., Miranda, G. W. A., Coppini, N. L., “Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum–silicon alloys”, Journal of Materials Processing Technology 122,127-138, (2012).
• Kim, H., Seo, K., Kang, K. H., Kim, A. D., “Nano-Lubrication: A Review”, Internatıonal Journal Of Precısıon Engıneerıng And Manufacturıng Vol. 17, No. 6, 829-841, (2016).
• Tawakoli, T., Hadad, M. J., Sadeghi, M. H., “Influence of oil mist parameters on minimum quantity lubricationeMQL grinding process”, Int. J. Mach. Tools Manuf. 50 (6), 521-531, (2010).
• Pinar, A. M., Filiz, S., Ünlü, B., S., “A comparison of cooling methods in the pocket milling of AA5083-H36 alloy via Taguchi Method”, Int J Adv Manuf Technol, 83:1431–1440, (2016).
• Gupta, A., Singh, H., Aggarwal, A., “Taguchi-fuzzy multi output optimization (MOO) in high speed CNC turning of AISI P-20 tool steel”, Expert Syst. Appl. 38, 6822–6828, (2011).
• Fratila D., Caizar, C., “Investigation of the influence of process parameters and cooling method on the surface quality of AISI-1045 during turning”, Materials and Manufacturing Processes, 27 (10), 1123-1128, (2010).
• Kıvak, T., “Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts”, Measurement 50, 19–28, (2014).